Citect & M340 using TCP Eth.

[callelundin 0]

Hey there all! First of all, i really enjoy this forum. Allways friendly people to help beginners like myself! :D This is my first Modicon project ever so bare with me! :) The setup is like this. MASTER: PLC M340 with Ethernet modul. SLAVE1-5: STB I/O devices. SLAVE6: Veijo Citect First of all i setup the PLC and got communication to work with Slave1, using Ethernet. Now i whant to connect my 150tag SCADA system to the PLC so i see that it works aswell. Thing is, how do i do? I've done the setup on Citect with the Wizard, choosing M340 Ethernet, IP to the PLC and port 0 (default/blank). But how should i do in Unity Pro S? I pasted a picture on my networksetup that is workning with the first slave, could any kinde soul please stepme to how i should setup the next line to open communication to Veijo Citect? Thanks! :)

[callelundin 0]

Problem solved, it was in the Citect.ini file, modbus initype is by default 2 and should be 3 for MODNET30 protocol to the M340 PLC. :D