cable pin out for E1041

[pszczepan 2]

I found that E-terminal E1041 needs cable CAB5 for serial conecting Do you have pinout for this cable? Thanks

[Crossbow 295]

Actually E1041 uses the CAB30 for programming. CAB5 is a programming cable for the older terminals. Drawings of all the cables should be available from your local Mitsubishi representatives. They are on the Mitsubishi US website at www.meau.com, not sure if you can get into it from Poland or not.

[kaare_t 155]

Pinout for CAB30: http://www.beijer.no/web/web_aut_no.nsf/do...12573850036CD7B

[MinhThuan 0]

I need CAB5 or CAB6 pinout. to upload HMI E-300

[Crossbow 295]

Next time start a new topic, don't post on a topic which has been inactive for 3 1/2 years. http://www.meau.com/functions/dms/getfile.asp?ID=015000000000000001000001782600000