how to convert programmable of old magelis to new magelis

[biglam106 1]

hi everybody ! i have a problem, please help me now, i want to use new magelis , it is XBT GK5330 but old program inside old magelis ( XBT F024510 ) and i dont know how to convert program from old magelis to new magelis ? please help me , i have just attached this file, please see it thanks LIVE_VER.rar Edited 23 Sep 2009 by biglam106

[Crossbow 295]

I've been out of the Modicon world for a while. But last I knew you couldn't convert old Magelis code to Vijeo Designer.

[biglam106 1]

thanks you crossbow i have some questions , i use PLC is TSX P57253 and HMI is XBT GK5330 please tell me what cable do i use in this case : 1. PC <------> PLC 2. PC <------> HMI 3. HMI <------> PLC thanks you very much look forward to hearing from everybody

[aggattapauer 2]

XBTZ9780/2 to COM2 XBTZ9018 to COM1 TSXPCX1031 to COM1

[biglam106 1]

thanks aggattapauer now, i want to transfer progmmer from old MAGELIS : XBT F024510 to PC please tell me what cable and software do I must use?

[Crossbow 295]

The old software was called XBT-L1000. You will need to buy it from Schneider Electric. I can't remember cable number on programming cable.