PWM Instruction for SLC500

[Corben 2]

Hi everyone I need to know the settings for PWM Instruction. In the SLC instruction set help they said that you can assign outputs O:0/3 and O:0/2 to the PWM function. I checked in the function files, and the value for OUT parameter is 2. SO for me this means that the both output listed above are dedicated for my PWM instruction ? What could happened if my output O:0/3 is coded for something else? Processor type: Micrologix 1200 (with SLC500). Thanks in advance

[b_carlton 61]

As I read the manual I see the "2" indicates output 2, "3" indicates output 3. The PWM appears to control only 1 output.