Husanto

Free Software B&R

9 posts in this topic

Hi all, I have problem about PLC B&R with Type EX290, i want to check the problem but i don't a software and the cable, can any body tell me what software i must to use and where i can find the software for free?? Thanks

Share this post


Link to post
Share on other sites
Contact B&R directly and ask them. I do not think the software is free.

Share this post


Link to post
Share on other sites
You need to use Automation Studio. There is an evaluation version available here: http://www.br-automation.com/cps/rde/xchg/...evel_1=Software You will need a copy of the project as well as B&R PLC's don't allow for uploading...

Share this post


Link to post
Share on other sites
Hello, EX290 is not a PLC but an X2X bus controller for System 2003 product line. The PLC would be something like CP474 or CP476. To connect to the PLC, you need a straight RS232 cable and a program called PVI Transfer. You can download it for free here: http://www.br-automation.com/cps/rde/xchg/...10_ENG_HTML.htm You can use this program to download the logbook (error log) from the PLC. Automation Studio is used for development or maintenance. You only need if you are going to program the PLC. If you are sure the problem is with EX290, you need to look at the LEDs. They are described in the datasheet. http://www.br-automation.com/cps/rde/xchg/...29_ENG_HTML.htm EX290 has no programming of its own. If all else fails, please contact B&R technical support at the link below. http://www.br-automation.com/cps/rde/xchg/...40_ENG_HTML.htm

Share this post


Link to post
Share on other sites
HI its amazing i have same problem and i also want free software plz tell me any solution for this thanks

Share this post


Link to post
Share on other sites
Alvi, As was clearly stated in this thread, the software is not free, and there was a link for a demo version. Nobody on these forums will make illegal copies of software for you, it is against the terms of service to even talk about it in the forums. Please read the whole thread before replying.

Share this post


Link to post
Share on other sites
But how to register in that web site ? there is no option for registration. by this way could you please give me another web site for downloading automation studio? i need it for my studies best regards Edited by atmoha

Share this post


Link to post
Share on other sites
This topic is 3 1/2 years old. I highly doubt the original poster is reading it. Did you try to contact B&R to ask about it? Call them and ask, or email through that website.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now