Anyone tried the USB SC09-FX to connect to FX2N 16MR

[Daveinarmstrong 0]

Has anyone tried the USB SC09-FX to connect to FX2N PLC? I am currently using a borrowed SC-09 cable and serial adapter with my Vista laptop with great success. I would like to save some money and purchase the USB SC09-FX to connect my Vista laptop to my Mitsubishi FX2N 16MR PLC. Does the USB SC09-FX work with Windows Vista?

[panic mode 245]

what software you plan on using and are you sure it works with Vista? http://www.meau.com/eprise/main/sites/publ...ftware_Versions

[michel 0]

Hi, if you want to save money on a cable, you have another three options: 1) Connect the USB2RS-232 converter NOT through an SC-09 cable, but hook it up according to Sergei's diagram http://forums.mrplc.com/index.php?showtopic=609 2) Buy a USB2RS-422 converter and connect wires to mini-din. Sergei's diagram is a good reference for that. 3) Buy an after market SC-09 cable from China, there's a canadian ebay seller selling those for $50 or something. If your USB2RS232 cable works in Vista, you can pretty much say that the USB SC09 cable will also work because it is nothing more than a virtual COM port, just as the USB2RS232 converter. Michel

[Crossbow 287]

What are you referring to with the USB SC09 cable? I assume you mean FX-USB-AW, and it is completely supported under Vista with the version 1.10 drivers.

[panic mode 245]

Did anyone try GX developer (or IEC) on Vista? According to list on www.meau.com they are not yet Vista compatible.

[Crossbow 287]

GX Developer is compatible as of version 8.62. MEAU has not released 8.62, and according to my sources will be releasing 8.78 shortly. The main holdup was Vista-compatible versions of GX Simulator and GX Configurator tools. I think GX IEC is compatible as of 7.03, but I have not seen a newer version than 7.01.

[skojpulla 0]

Yep seems to work very well. Tried it with gx iec and xp. will try it on win7 soon.