PANELVIEW 550

[gertsc 0]

Helo, I am trying to have the PLC monitoring what screen that is currently being dislpayed on the HMI. I have being reading a couple of topic's, that mention to set the Screen Control Tag in the Status Tag under Application Settings (The same is mentioned in the help file, using the "Screen Number" box). The problem is I can not find any "Screen Number" box. Any help will be greatly apreaciated. Thanks, gert

[Mickey 71]

To have the PLC monitor which screen is up on your PV you need the status tag. See pic below for how-to

[gertsc 0]

Thanks for the reply, I was confused because I had several tags already. Anyway, I entered a new Integer Tag and it works as you explained..... Thanks again, gert

[Mickey 71]

Your welcome.