Sign in to follow this  
Followers 0
MIKE31

ALLEN BRADLEY SLC PROCESSOR 5/04 COMMUNICATION

28 posts in this topic

In the I/O configuration of each chassis, the RSLogix 500 software will help you to size the minimum power supply required given the current draw of each module in the chassis.

It's only an advisor and will not prevent you from downloading a program to the processor should the power supply be inadequate.

NOTE: This is an offline feature and does not read actual current draw. It uses an embedded database with backplane current draws.

Be sure to size the power supply for future additions to the chassis should there presently be empty slots and to allow for some headroom so the power

supply doesn't run continuously at red line capacity.

Edited by Filthy McNasty
2 people like this

Share this post


Link to post
Share on other sites

sir that cpu is two type of promblem occur 

first is steady fault led is on 

second the key switch is left side fixed,that means (run side) but the cpu is blinking in steady fault led on.so the cpu is not connected to pc.in rslinx autoconfigure is not sucessfull.

plse tell some detail.how to slove the promblem.plse sir

Share this post


Link to post
Share on other sites

Again, open RSLogix500, go online with the processor, and seek out the fault code

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now
Sign in to follow this  
Followers 0