Sign in to follow this  
Followers 0
viecko

CompactLogix to RSView32 by EtherNet

6 posts in this topic

Does anybody has made a network betwen a CompactoLogix and a PC with RSView32 via EtherNet/IP? is this possible?

Share this post


Link to post
Share on other sites
Yes. To me this is one of the easiest , most straight forward network I know.

Share this post


Link to post
Share on other sites
All Ethernet/TCP-IP with a PC running RSView and a ControlLogix CPU is gravy. I would get the CPU powered up, program loaded in, and IP address set. Then move onto the PC, setting up RSLinx to connect to the new PLC. Once you have the comms ready to roll, load in the RSView application and start talking to the PLC. Cycle PC power and life should be good.

Share this post


Link to post
Share on other sites
Yes, did that yesterday. I used RSLinx Pro as an OPC server. First use RSLinx to set "OPC topic" linked to L32E via ethernet i/p driver. Node in RSVIEW32 is linked to OPC topic. Tags are Node then "TAGNAME". BD

Share this post


Link to post
Share on other sites
you can make a opc topic in Rslinx ,the use opc to make the connection between PC and Compactlogix

Share this post


Link to post
Share on other sites
HI, IT IS POSSIBLE YOU JUST SELECT DDE SERVER IN RS VIEW AND CREATE A TOPIC IN LINKS ORKS FINE. RG NS

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now
Sign in to follow this  
Followers 0