Sign in to follow this  
Followers 0
ddevins

Remote I/O SLC 5/04 to Drives

2 posts in this topic

Hello Everyone, I read some posts from a year ago on this and still have some questions. First, I have an existing control panel that was used and working with a SLC 5/04, Panelview 600 RIO, and 1305 drives on a conveyor system. We are refurbing the panel and replacing the drives with PowerFlex 70's. The panelview screens and PLC program are being changed for a bit different operation but still a conveyor system. I have the 20-COMM-R manual here and also Bulletin 1203 Remote I/O Comms Module manual. But I cannot find the status words for the old 1305 to compare to the PF 70 status words to see what I have to change if anything. I must be missing something. The program uses BTR & BTW file. All help and comments appreciated. Thanks.

Share this post


Link to post
Share on other sites
You should be able to use these manuals to figure it all out...Note that the drive book is for FRN 6.0...older FRN drives may be different with regard to the RIO comms. and the manuals for the older firmware drives are available at ab.com too... http://literature.rockwellautomation.com/i...um011_-en-p.pdf http://literature.rockwellautomation.com/i...um002_-en-p.pdf Paul

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now
Sign in to follow this  
Followers 0