Search the Community

please can anyone tell me how to set A1S68DAV analog output module parameters , such as voltage output and resolution? or is the parameter can't be set at aLL (ie, fixed at -10V to 10V)?

hello,,,, i want to ask, is there a way to convert the yaskawa PLC ladder program to a Mitsubishi PLC? and what software is used to program PLC brand of YASKAWA?

Hello,, I have motion controller A series A172SHCPUN,, I have written the program ladder into the CPU, but I can't write the motion program.. i dont have the program to open file the program motion and I want to ask if I have the software SW3RNC-GSVE, my os computer is window XP, Can it be installed? and is the cable transfer used the same as the ladder transfer program cable (SC09)?

Hi everyone; I want to communication Omron NB series HMI with Allen Bradley Micro 830 PLC. I don't know is it possible. İf its that possible, help me please..

Haiwell PLC programming software- HaiwellHappy View File HaiwellHappy Programming Software Features HaiwellHappy is the programming software for Haiwell PLC. It accordance with IEC 61131-3 standard, supports  built-in simulator and three kinds of programming languages (LD-Ladder Diagram, FBD-Function Block Diagram and IL-Instruction List). It can run on the systems of Windows 98, Windows 200X, Windows XP and the later Windows versions.   **  You can get the latest version from Download center for free **     HaiwellHappy Features     l Haiwell Cloud Programming Support Haiwell Cloud platform, can use Haiwell cloud to do remote programming for Haiwell PLC as upload/download, firmware upgrading, self-diagnosis, monitoring and debugging. Easy for remote connection and real-time data monitoring of the site. Also you can do local programming through a HMI which supports built-in cloud engine. l Built-in PLC simulator Haiwell PLC programming software supports internal simulator, realizing the PLC program run in the simulation. During programming or the programming is completed, you can run PLC program in the simulation without online to check the program execution is correct or not. It can reduce on-site commissioning time greatly, reduce debugging difficult and improve debugging efficiency. l Communication simulator It is used to the debug communication instruction simulation tools. It can be manually input simulately response message returned from salve, or you can use the computer's serial port to communicate with salve really, Simulate the process that PLC executes communication instruction really and process the return data from the salve.  l Interpolation simulator Track and draw the trajectory generated from motion control instructions such as the linear interpolation, circular interpolation, listing parameters of the pulse output channel of the motive plane and corresponding to each axis, display the current position of the channel, the mechanical home position, output mode, you can set shaft length, unit pulses. l PLC executable file Generation PLC program can be generated to executable file which is released and executed independently. So you do not need to send the PLC program to the user, it can be very easy, very safe to put the PLC excutable file to the user to download, but do not worry the user would can see the program content. l Innovative convenient instruction sets On the basis of analysis and absorption of various PLC instruction, Haiwell PLC launched many powerful innovations facilitate instruction. As communication instruction (COMM, MODR, MODW, HWRD, HWWR), data portfolio diversification instruction (BUNB, BUNW, WUNW, BDIB, WDIB, WDIW), PID control (PID), valve control (VC), upper and lower alarm (HAL, LAL), range transmitter (SC), temperature curve (TTC) etc. Any one instruction can realize the function but other PLC required to multiple instructions. These instructions are very easy to understand and use, greatly improve the programming efficiency and running speed. l Modular project structure Create 63 blocks total (main program, sub program, interrupt program) and chose any programming language to program. The execution order of block can be adjusted at random. Each block can be imported and exported independently and has the same password protected of program projects. So we can fully realize the modular programming and program reuse dreams. l Convenient instruction form Provides multiple instruction tables. Use these tables can reduce the amount of programs, saving program space, such as initialization data. Each table can be imported and exported independently and has the same password protection of program project. l Powerful online networking Search out all the PLC that connect with the PC. Show running status, fault status, RUN / STOP switch position, hardware configuration information, communication port parameters such detailed information of all the online PLC. Select any PLC for online monitoring, program download, firmware upgrade, controlling PLC stop, adjusting PLC real-time clock, modifying password protection, modifying communication port parameters, modifying the watching-dog time and PLC station names. l Online monitoring and debugging functions Provide 10 pages of component’s monitoring table. It can choose in decimal, hexadecimal, binary, floating point and character to display data. Support component and register component monitoring hybridly and displaying component annotation at the same time. All instruction tables can be imported to the monitoring table. l Unique real-time curve functions Monitor any of the register elements of its real-time curve, convenient to control and debug during the process. l User friendly input method Provide shortcuts, drag and drop, click and many other command input. Suggest effective components or range of values for each input and output terminals. It can be entered directly. Some data of combination (such as communication protocols etc.) can also double-click the instruction to configure the input data. l Convenient annotation Provide the component comment, network comment, instruction comment, block comment, table comment, and project comment. After the component with “//” to input comments directly (e g.: X0 // motor start).Comments can choose to download to the PLC for reading or modification facilitately. l Detailed tips and online helps Provide PLC resource window, instruction window, etc. All the instructions and detailed description of hardware modules can be found in powerful online help system which is open through clicking F1 key in the programming interface to find the answer. Even if use HaiwellHappy programming software for the first time who can easily complete the preparation of control program. l Convenient editing functions Support all conventional editing operations, searching and replacing, instruction up and down, network up and down, copying and pasting between program projects. l Hardware configuration, sub program parameter passing, local components, indirection, print, preview, debugging, CRC calculation, password protection, etc. Submitter Haiwell Submitted 03/18/19 Category Other PLC Demo Software

Hello all   I have OMRON PLC CP1E-E10DR-A.  I installed CX programmer , where I unable to connect the PLC.Driver successfully installed. In the software , i unbale to connect, there is no option for choosing E10DR, Th software has option of choosing E20 and above. Can anybody help in this?   Thanks

Dear all I am very new to PLC and having knowledge in embedded C program.I would like to start learning PLC programming.  I have OMRON CP1E-E10DR-A , It detected in my computer. I want suggestion recommendation on that which software will be chosen to work with this PLC. Please help me. Thanks

Hello all, I am a beginner with PLCs programming. I have an issue on GX Developer programming software from Melsoft trying to program my Mitsubishi Q-series PLC. CPU is Q03UDCPU. When the program is written and I try to upload it to the PLC, with the write to PLC window, I check -Program -- MAIN and -Prameter -- PLC/Network/Remote, click EXECUTE and a message appears : "Device point that is set in parameter is not match the device point in PLC". I can't fix it. In Parameter - PLC Parameter - Q parameter setting (window) - I/O assignment tab : I have (see image). Whe I use CHECK button it says there is no error. The X41 input device is plugged on slot 1/00. I am making this folowing the instructions a PDF I found on the Mitsubishi electric's wesite : Q-series basic course (for GX Developer). Thanks for the help, A. S.

I have the following for sale. I would prefer to sell as a lot. I can send pics if there is any interest. EX40 + 20 IO Extension with 2 Unused output PCB for ext unit. 2 EX40 Plus PLC. Timer Counter access unit Operational. With 2 PCB with errors showing. Handheld Programmer (Squeekbox) excellent condition. CutlerHammer Original software with hardware dongle. Some spare parts, they were operational before I used for testing various functions. PM ME IF ANY INTEREST.

Hey everyone! New member here, and this site has always been a big help!  I try to help other folks too, but a lot of guys are super quick on here.   I've got a problem using some obscure components. I inherited a sensor network at work that uses Panasonic S-Link and I need to read them from a Q-Series. Panasonic makes a module that slots into the Q Series called an SL-VMEL-Q that I have.   My question is:  Did I do everything correctly on my Mitsubishi side? I put it into the parameters as an intelligent module with 64 points and I put the correct address in for the start I/O. Is that all I have to do?  This is the first time I used a module that wasn't on the drop down list when you add one in GX Works 2.   I can read and write to the buffer memory, but I can't get the unit to send to or receive from the sensors. I think the problem is that there is no end unit on the S-Link line (I don't know if it's just a terminating resistor or what), but it previously worked without one, so I can't be certain.

Dear sir, i want sample program for modbus tcp for q series plc

Hi everyone,  I am trying to use Kepware to communicate with my PLC setup which is the iQ-R Series R08PCPU.  I read the documentation which is available at https://www.kepware.com/getattachment/3daf1ac3-5c76-49ce-bbfe-f0fb1015f6cc/mitsubishi-ethernet-manual.pdf I read through the setup for Kepware and the setup procedure for iQ-R series but it still didn't work.  From the documentation, it said something about "using special ladder logic to enable ethernet communications is required.", I couldn't find anything about this online.  Here what I did in addition to the documentation: - Enabled IP Packet Transfer - Ping the PLC's IP Address which was successful Does anyone have any idea what I didn't do to establish that communication between Kepware and R08PCPU?  Thank you in advance. 

Hello, everyone. I want to ask for help..  i want to upgrade HMI hakko V7 to V9.. have file hmi in V7 use software V-SFTV5 but when I open file V7 use software V-SFTV6 its cant convert and i attached the screenshoot below..  can someone tell me what's wrong?

Where would I find TC_2PID_Function_BLOCK? as described in the Temperature Regulation Solution, Quick Start Guide v1.02 Is there somewhere on the omron web site to find all up to date FB Libraries?

Please assist me with the following; regarding the ME96SSHA-MB Power meter data transition with Melsec-Q series PLC; We acquire to read various values on dedicated Modbus storage address registers at the simultaneous into a Melsec-Q series PLC via Modbus (TCP or RTU)  for calculation purposes. Naturally, since the reading of these variables are to provide accurate instantaneous results, it is a requirement that these values are to be read at one scan.   However, as can be seen below, there is a gap in address register range – of which, if all of these are scanned simultaneously, yields an exception error when read. This error is only avoided by scanning these data sets separately – which is not ideal for our application – since accuracy in calculations is imperative.

Please assist me with the following; regarding the ME96SSHA-MB Power meter data transition with Melsec-Q series PLC; We acquire to read various values on dedicated Modbus storage address registers at the simultaneous into a Melsec-Q series PLC via Modbus (TCP or RTU)  for calculation purposes. Naturally, since the reading of these variables are to provide accurate instantaneous results, it is a requirement that these values are to be read at one scan.   However, as can be seen below, there is a gap in address register range – of which, if all of these are scanned simultaneously, yields an exception error when read. This error is only avoided by scanning these data sets separately – which is not ideal for our application – since accuracy in calculations is imperative.

My apologies for being a newbie on this, but could someone save me on this... I have a Viper 650 and an eMB-60R controller which I want to control by ePLC connection using an NJ501-1300 PLC unit, SYSMAC Studio with EIP Adept Library for Robot... All are starting up well, and I connect all components to a switch hub...  But following the ePLC guidelines, the IP Address showing on the controller is 172.16.132.111 I change the IPV4 IP Address on the PC settings to 172.16.132.10 and the subnet to 255.255.0.0 but the Adept IP Address Setting Tool on SYSMAC doesn't detect the Robot IP Address, also i tried ipconfig on command prompt which shows a different IP Address IPV4 169.254.197.75 and subnet of 255.255.0.0, I changed the previous setting on the PC setting to 169.254.197.10 with the same subnet. But still PC doesn't recognize. I tried both configurations if ACE Software can detect it but the same ACE can not detect it also... Appreciate any thoughts on what's wrong in my configurations. Thank you.

Please send Fuji Wsz plc software download link  

Please send Plc software link

Currently, our SCADA setup uses Kepware, Wonderware, and Canary Labs data logger and historian. The data flow is as follows:  PLCs --> Kepware (on PC near process) Kepware --> Canary Data Logger (on PC near process) Canary Data Logger --> Canary Historian (on Server) Canary Historian --> Canary Axiom Viewer Client (on engineer's PC) We use Wonderware as an HMI on the Process PC to control the process. As many will know, this is very wasteful as Wonderware includes many other features and we are paying for all of them yet using only the HMI feature. Our goal is to cut Wonderware out of the equation (i am aware that Wonderware  could replace both Canary and Kepware with its data logger and OPC server features but this is the direction that was chosen so we are going with it).  My question is: Does anyone know of any simple and cheap (-er than Wonderware) PC-based HMI software that could replace Wonderware on the Process PC?

Hi there, just need a little help, I’m very interested to learn all about plcs, I know the basics and I know how to wire them, programming them is the hard bit! Ive got an FxOS MR30 from work, to play around with, I know I also need Gx developer also,  my question is,  could I use gx developer “micro fx “ for this?    It seems to be a lot cheaper than the normal go developer.http://ie.farnell.com/mitsubishi/gx-developer-fx/software-micro-fx-plc/dp/3825577 any help with this would be great thanks 

Required cable PIN configuration for Nexgen 1000 series PLC, MS-40M-E, NT11-SF121B-EV1 , GT1020-LBD.  

Hi Everyone We are setting up a initial training in PLC programming for technicians, I got some experience with SIEMENS S7 but this seems to be an expensive choice, we would like to opt for a budget PLC but at the same time would like a user friendly software for teaching......I would like to have views of users of other PLC brands such as OMRON, MITSUBISHI or even Schneider??? thanks Jay

Hey guys, been looking around for a solution and I was brought here.  I'm a programmer at a place that just put in a bunch of these Mitsubishi Q series QJ71e71-100 ethernet controllers.  I wrote a TCP server in Java to try and talk to them.  I'm trying to get data sent over from a little GOT1000 test terminal.  The zp.open command is working fine and i'm seeing a good syn-ack handshake, and if i push some text to the plc from the program I get a response (even if it is always the same nonsense).  but when i try to use the zp.send it fails, I get error C1A6 on the ladder program and the q series lights up the comm error light.  I know I'm being super vague here, I was just hoping to gain some insight.  I don't much know what to expect from this forum if you guys are active or if my question even has an answer but i've been banging my head against the wall for days now.  I'm just using a tutorial program from the q series manual and a super basic tcp handler in java.  If there's any other information I can provide let me know.