Search the Community

Showing results for tags 'wsz series plc software'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 168 results

  1. Hey, does anyone know why the simulation mode is on? how to change it? (LED SIM )
  2. GX Developer

    Hi, can anyone help me please. Newbie to plc and bought a mitsubishi and was told off the ebay seller that gx programmer is free to download? I looked on mitsubishi and coukd not find it? Does anyone have a link they could help me with pls. Regards  Andrew 
  3. Omron NB Software

    I am facing the error while compiling the program , there is only 1 error , but not able to figure what is the actual error. Please suggest and support.
  4. Hi, So I have a problem, that BootP DHCP server doesn't find my 1734 AENTR series B and so I can't assign IP address to it. Been trying many things. Any advice? I'm new to AB and I guess it may be a really easy thing but so far I didn't find a solution. 
  5. Hitachi H-700 Series

      Welcome, How to program this PLC?  
  6. I am new to automation systems and devices and I just want to know how to connect two HMI's (each one would control different things) to one PLC using Sysmac Studio and NB-Designer via Ethernet. The model of the PLC is NX1029020 and the HMI's are one NB10W-TW01B and an NB7W-TW01B. I searched for info about this topic online but I couldn't find anything that worked for me, I saw an article from OMRON where they connect two NB's to the CP series, but in my case, NB designer doesn't allow me to insert more than one HMI in the same project, I also found something similar on a youtube video that gave me an idea about how to connect multiple HMIs exporting the pks file and importing it to another HMI project but I still can´t figure out how to add both to my PLC. I would thank you a lot if you could help me with this because I know it's not a rare implementation, just I haven´t found the right way to do it. I also leave the links to the Omron article and the youtube video I found. https://www.myomron.com/index.php?action=kb&article=1554 https://www.youtube.com/watch?v=rXx5lut7G9I
  7. Q and iQ-R series

      Hello,  I want to know, if it is worthwhile to transfer from Q series to iQ-R? Currently our equipment is using Q series, which ss a vacuum coating equipment with about 10 power instruments, 20 gas controllers, and pumps and so on. As for the analog and X, Y points, Q is quite capable.   I can not see any advantage to switch to iQ-R, but some people want to. So I want to know,       1. will Q be outdated in the near future?       2. will use iQ-R cost much more than Q? including peripheral units.       3. has iQ-R really been widely adopted?       4. thoug iQ-R may be powerful, I think use multiple middle size CPU's can be more advantageous,              is this right? Many thanks in advance. Ting    
  8. I have a huge confusion regarding the retentive timers on FX3GE. According to the programming manual for FX3G(image attached), all retentive timers use the EEPROM. This is very confusing to me because the retentive timers are modifying the measured time constantly in an EEPROM register and EEPROM type of memory is known to be write limited. After a couple of million write cycles the EEPROM registers burnout. I've experienced this myself by constantly using the T250 and after a while it became unusable. The timer stopped counting time after some time. This leads to my decision that retentive timers on FX3GE PLCs are something that should бе used only on rare occasions so as to avoid EEPROM memory burnout. If this is true than the real question comes in: What is an alternative for using retentive timers on FX3GE when you want to measure time between two events. The instruction TTMR for teaching timer is appropriate however this instruction does not exist on FX3G series.  
  9. GX works 2 software

    Hi guys    I am having trouble installing GX works 2 software. The software is fully legit and came with 2 license keys the first one I put on work laptop and second on my personal laptop. The install all goes fine but when i try open up GX  Works 2 I get this message from the attached image. I have plenty of room on my pc and even have other PLC from different manufacturers on it without issue but the GX Works is just giving me grief and I have tried to increase data on MY laptop and other windows fixes but still get this message when I try open it.  Has anyone else encountered this problem before or any ideas?   Cheers guys     
  10. GX works 2 software

    Hi guys    I am having trouble installing GX works 2 software. The software is fully legit and came with 2 license keys the first one I put on work laptop and second on my personal laptop. The install all goes fine but when i try open up GX  Works 2 I get this message from the attached image. I have plenty of room on my pc and even have other PLC from different manufacturers on it without issue but the GX Works is just giving me grief and I have tried to increase data on MY laptop and other windows fixes but still get this message when I try open it.  Has anyone else encountered this problem before or any ideas?   Cheers guys     
  11. Quick Designer Software

    I am looking for a working copy of software that will work to modify screens on an old Quick Panel.  I believe the software is called Quick Designer. The old Panel I am trying to access is serial communication only. I have bought an interface cable from PLC Trainer.  I have a Windows 7  32 bit machine ready to go. Thanks, Scot
  12. EPLAN Help

    I am attempting to use EPLAN P8 (v.2.9) to import details from a 'holy grail' excel sheet of a cable list with terminal tags and numbers (source and target for each cable). To do this I began importing details in a trial and error fashion through the pre-planning menu to the pre-planning navigator. I have several questions. Question (1) Has anyone else tried to do this?  In the process of importing from the excel sheet I have not been able to successfully assign source and target for each cable object. It shows up on the synchronization dialog after I work through the field assignment but it disappears after import. ( I do not fully understand the proper structures, definitions, properties and levels to get what I want). I do understand if I import source and target terminals, and cable objects separately, then I can place on the detailed view and source and target are assigned then. Question (2) Does anyone know how to assign source and target to a cable object in pre-planning 'by import'?  (Reason being that the excel file is huge and manual assigning isn't feasible). On one of my attempted field assignment schemes I was able to have cable, source terminal, and target terminal, all on different levels (not actually assigned as source and target for the cable object btw.). However the result for source and target on the report (planning overview, form: f40_006) had all of the designations of the tree structure from the upper levels. For example, cable: HAC4401, source: HAC4401 X1:5, target: HAC4401 X1:5 TB1:5. (Where X1:5 is source terminal and TB1:5 is target terminal). Question (3) Does anyone know how to create a 'branch' or 'fork' in the tree structure in the preplanning navigator so that both source and target terminals (planning objects) are on the same level and so do not inherit each others details?  There's a bunch of info in reading the above I know, but if anyone can shed some light on this it would be much appreciated!!!! Thanks in advance,  MajorMac
  13. Hi All,  I am trying to limit the number of character for user to key in data edit . However, I put numbers inside it shows me invalid number of character. Anyone know how to solve it ? Note; My variable is in String Type   
  14. Codesys

    Hello - I stumbled across some mention of Codesys and was curious if anyone here uses it. Pros/cons? prefer it over other programming software. Have it downloading currently (since you can download a free variation of the application) but it looks quite interesting. Also - what PLC hardware is programmed with it? Did not see that mentioned on their website when I was browsing through.
  15. Hello, everyone I have to query a SICK distance sensor from an L26CPU via the onboard Ethernet interface. I have created a simple protocol which I start with the function block SP_ECPRTCL. Unfortunately it takes at least 25ms until the next telegram is started. The sensor responds within approx. 1.5ms. Does anyone know whether that works faster or is that a limitation when using the predefined protocols? Sensor manual:  OD5000, 8021391 (sick.com)  (Chapter 7.4) I am grateful for all the hints. Thanks and regards Dave SICK_Protocol.tpc Messaufbau_vTest.gxw
  16. Dear friends.. I want HMI panel view 300 software.. Is this available in net or free of cost in web sites
  17. Hi Dears, I have 2 No. CPU 315-2PN/DP (6ES7 315-2EH14-0AB0) I want to use this CPUs for S7 300 Software Redundancy. I Have 2 CP342-5 too for IMs. I want to use profibus port of this CPU for synchronization. if this CPUs are suitable for software redundancy? or I can not use this CPU and I must to use CPU-315-2DP instead?   Thanks
  18. Zm-71se

    Is there anyone, have this software? Coukd you help me
  19. I have a 1996 Howa Vertical Machining Center running on a Mitsubishi M520AM control. 3 Axis with Jig Changer on the main control. ATC and 16-tool magazine on 2 each Model E/FCUA single-axis amplifier/controls with a DIO extension interface to main control . I lost parameters and User PLC program to the 2 Model E amplifier/controllers at  ATC and the Magazine servos. Dead batteries, and both units are back to defaults. Main Control and Operation Panel work. I can read the ladder and write to CPU ladder from the operator panel, and I have a paper copy of the main ladder and parameters. I have a working FCUA-CT200 pendant to communicate with the 2 Model E controls, but no way to program a new user ladder and upload it to the Model-E's. Anyone know where to find PLC software for 1996 vintage Mitsubishi CNC controls? I can probably make any kind of interface cable it would take to get from a PC to the control. the FCUA-CT200 teach pendant will let me enter parameters  via 'PLC I/F' but it won't let me program and read/write a User  PLC.
  20. PLC password crack - FATEK

    hello, can any body help me about plc password crack, I have an old FATEK PLC and i want to upload the program to my pc but i don't know the password. please any one here.   Much appreciated if you can help me.Thanks 
  21. Hi All I need software for ALU201L, it is an old Schneider plc Thanks
  22. Mitsubishi

    i want mitsubishi plc programming software gt works 2 basic version
  23. Hello Mrplc's members I have a Korean version " goldsec Moj2" of Mitsubishi plc A0j2 I need to know the right software for it And how to get it I tried GX Developer but it didn't work because it have only A0J2h type And I tried melsec medoc (version 1.64) but it didn't have A series CPUs
  24. Hi, I have the following configuration where 4 PLC panels, with each having a Q12PH CPU and QJ71E71-100 module. All these QJ71E71-100 are connected to a HUB using straight cable. From the HUB one connection is going to an I-Fix SCADA which is already communicating with all 4 PLCs using MC protocol. I want to send data from 3 of this PLCs to the 4th PLC in the same network using fixed buffer communication. Can anyone provide a sample program for the same. Send and Receive side. I am using GX Works 2 for programming. Your help is very much appreciated.