Search the Community

Showing results for tags 'wiring proface'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 36 results

  1. Hi guys! I have a problem with Proface OP panel. There are some pages where the password is set. I think the password is in the OP panel not in the PLC. My question is that anybody know that how can I change the password? Where and how can I find it? Thanks for your help.
  2. Hi everyone, my boss has recently decided that he wanted to start using proface hmi and ladder logic for projects. The model were using is the LM4301TADAC. Im really new to proface programming and I'm struggling with trying to get an ifm effector pressure transducer programmed in analog on this.  How do you program analog inputs and get them to work with the GP-Pro Ex software? Thank you everyone for your help!
  3. Hi everyone, Recently, I started working with the Micro820 Controller Embedded I/O. My project is simple : when the output _IO_EM_DO_00 is set to true, an LED light turns on. But, even though it's super simple, I can't make it work. Here's my setup. If you need more information, feel free to ask anything !
  4. I'm trying to get an older system up and running again. I'm using the software from the original build and a new screen off the shelf. (we had one new in the box never been opened.) The program downloads fine but It never shows up on the screen. I get the same Ethernet setup screen that it originally powered up to new from box . I pulled the program from the same model screen and I can upload it to the old screen just fine. but it will not work with new screen, even though it seems to upload just fine.  Software is Quickdesigner 3.70 (yes it older)  Screen is a Proface GP2400-TC41-24V (which is the same model number of the old screen) Any help is greatly appreciated. (yes I cycled power)
  5. Hi,I am new in project engineering and my previous work is PLC programming only. For experienced engineers, what are the step by step procedure that you use in migrating/upgrading and what are the things that I will avoid?
  6. Quick Panel (TCP model) Upload

    Hello All, I have an older Total Control Quick Panel QPI2D100L2P 10.4 inch Monochrome that I am trying to retrieve the program on. The original programmer is unknown and we do not have a copy of the program. The screen has gone out on this panel.I am using quickdesigner on an XP virtual machine. I have the correct programming cable the 8 pin DIN connector HMI-CAB-C49-JWhen I connect to the HMI, The software "sees" that the HMI is connected and says "waiting for the Display to be ready" then times out and tells me "the display is Hung" and another message "Turn display OFF" when I turn it off the software gives me the message "Turn Display ON" then when I turn it on, the software goes to "waiting for the Display device to be ready" and just sit there. Nothing more. I have waited for 20 mins for it to progress and nothing. At first I thought maybe the Panel that I am working on is just bad. However I get the same indications on another, same model, quick panel that IS working just fine. I know this is older stuff. And ProFace Support (who took over making the replacements from TCP) wont support using quick designer on anything other than a Win 2K machine or older. Anyone have experience with these panels?
  7. widadi

    does anyone can help how to connect plc fx2n-16mt with servo drive mr-j2s-40 and motor servo hc-kfs-43 ? please give me wiring schematic thanks a lot
  8. I am trying to connect a Turck FEN20 Ethernet I/O block to a LT4301M to use as remote I/O.  I am actually trying to set it up as a test bed for both the LT4301 and the FEN20 as my company would like to consider using one or both of them in future low-cost projects.  So I have two basic goals: 1) prove that the LT4301 can easily be set up to use cheap EhternetIP (or modbus) expansion modules 2) prove that the FEN20 can easily be set up to work with PLC brands other than AB (because most of our customers are Omron, Siemens, or Melsec). So far I'm unable to prove either.  I cannot, for the life of me, figure out how to get the two to communicate.  Proface has several application notes with same GP-Pro example projects for setting up different communication protocols but none of them work for me.  I've tried several of the different EthernetIP protocols available on the Proface as well as several Modbus protocols.  I know others have set these Proface units up to work with Phoneix and Wago Ethernet I/O... so what am I missing?
  9. Hi Guys Is there a way to display torque tightenings from a Atlas copco PF3000 box onto a proface HMI  AGP 3400 Cheers K  
  10. I wonder if anyone can recommend cable id printer? I know Brady is the leader in this field and I have used their products in the past but I wonder if anyone has used any other manufacturer they can comment on? I found the K-Sun Green Machine but I am not sure how does it compare to lets say Brady BMP71 and how much more expensive or cheaper their consumables are? Any other products worth mentioning?
  11. Lenze drive fault on proface

    Hi I am having a problem with an error/fault code. The fault comes from a lenze drive as an integer. We have a proface HMI monitoring a DBW in the siemens S7 300 that holds the lenze fault code. The PLC comes up with a generic code "lenze drive fault". The proface comes up with the drive code. I would like the PLC to produce a fault description using the lenze fault code in the DBW, instead of the generic one [listed above]. could anyone please help with this problem Thanks Robbo