Search the Community

Showing results for tags 'wiring proface'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 36 results

  1. Hi everyone , I need your help !!! I am currently working on a project where I have to control a stepper motor (oriental motor AZD CEP) with a proface HMI. To do this I use implicit Ethernet IP messaging. The problem is this: when I change screens, I lose the connection between the two devices. After 20-30 seconds, the connection is reestablished. I've already spent two days on it and I can't figure out where the problem is coming from. Does anyone have any idea what's wrong? If you need additional information or screenshots to understand, let me know. Thank you in advance for your help.
  2. Help with wiring diagram

    Hello,   I'm working on a project that involves using a 1734-AENT remote IO module. In this project, I need to configure analog inputs, digital inputs, and digital outputs.   Since I'm new to this field and have limited experience, I'm looking for guidance in creating a wiring diagram.   If anyone in this community can provide assistance or perhaps share a basic wiring diagram template, I would greatly appreciate it. My primary focus is on generating the wiring diagram itself.   Thank you for any help you can offer.
  3. fx3uc-64mt/d

    Dear All , i Have FX3uc-64mt/d    plc. i am getting confused about its wiring . In manual it is mentioned that plc can be run on both sink and source while when i connect only OV to any pin it indicates the input high. although no signal is given to common terminal . can anybody explain me this phenomenon.  thanks in advance. 
  4. Dear All, At the moment, I have project with PLC Delta and HMI Proface. I design HMI GP2500 by GP-PRO/PBIII ( V7.0). I see in List Device PLC of Software  not support PLC Delta.  Can you tell me how do you connect or Software HMI Proface ( Gp2500) support PLC Delta ? Thanks you very much.
  5. Hello All, I am currently stuck at fx2n 232bd which has to communicate with proface 4301tw hmi , although i have many hmi's available but i am unable to communicate this with hmi, almost tried every thing i just wanna know the exactly settings in gp-prox fig 1 ...  and fx cpu parameters anyone experienced guy ?? Help would be greatly Appriciated. Thanks
  6. Hello guys,  Can anyone help me about how to make a growing circle with proface program :). I would like to control it by a real tag or so on. Like if the real tag is getting bigger the circle has to be bigger too between a range. Unfortunatelly I didnt find any solution for this yet, maybe you guys are more experienced and someone could help me. Thanks ahead. 
  7. Proface with Serial Printer

    Dear Sir, Good day. I facing difficulty on using proface to print out the data using serial printer. I did follow all the instruction on proface reference manual but still fail to print out anything. Anyone here having experience on this issue? Thanks. 
  8. Delta PLC Analog Wiring

    Good day all, I recently working an assignment to read analog data from sensors. I connected everything just as what the manual for sensor stated. My PLC is DVP20SX2 and the sensor data i want is 4-20mA. The analog sensor has two wires, Analog Output + and Analog Output GND. I connected the + to I0+ and the GND to the VI0-, but when I work online using the ISPSoft, I can't get any data. My doubt is the wiring. Can anyone guide me on this? Is my wiring wrong? does analog works the same as digital, where we have to connect to same COM?
  9.   Sir, I have a problem storing logging data from GP Viewer EX to CSV file format. the GP Viewer screen displays an RFAA026 error that is "The specified folder does not exist on the server. Check the external storage for the specified folder". I do not understand about the folder in the server but for the external storage folder is correct. can anyone help
  10. CJ2M PLC power supply wiring

    HI all,  Is there anything issue or wrong in thing connection ( added noise filter & fuse. )?  
  11. Hello guys,  I am new to PLC, most of what I know is on the programming side . I am trying to build a trainer for myself with a used  Micrologix 1100. when I connect 24V DC to input side, the controller powers on. My understanding is that it should inly power on if I supply 110V AC to the power side . I think I might have damaged the device. Please advice   
  12. Alice Sales Manager Changsha Zhinian Automation Equipment Co;ltd   Te/whatsapp:+8613341312293 Fax: 0086 0731-82292217   Email: info-zna@zhinianauto.com   Main products: PLC: Mitsubishi, Omron, Panasonic Inverter: Mitsubishi,Fuji, Omron,. HMI: Mitsubishi, Omron,, Proface,FUJI, AC Servo: Mitsubishi, Omron,FUJI Sensor: KEYENCE,OMRON   Air cylinder: SMC Below is our best price product list: MITSUBISHI: 1.MR-J2S/ MR-J3/ MR-ES AC servo pack ( amplifier, motor, cables ,connectors) 2.FR-A700, F700, E700, and D700 inverters 3.GOT1000 and GT1500 Human machine interfaces 4.A, Q and FX series PLC(FX1N/FX2N/FX3U/FX3G/FX1S) plc OMRON: 1.C200H/ CQM1/ CS1W/ CJ1W/ CP1H/ CP1L/ CPM1A/ CPM2A/ CPM2AH plc 2.SYSDRIVE 3G3JZ/3G3MX2/3G3JE/3G3RX Series inverter 3.NS5-V2/ NS8-V2/ NS10-V2/ NS12-V2/ NS15-V2 Human Machine Interface 4.E3JK/ E3JM/ E3Z photoelectric switch 5.TL-Q5/TL-W3/TL-N Proximity switch 6.E6B2/E6C2/E6CP rotary encoder 7.G3NA-205B/G3NA-210B/ G3NB-240B Solid State Relays 8.H3CA/H3CR-A/H3DE/H3DS/H3JA/H3Y-2 Solid-State Timer   Contact me if you are interested, thank you !  
  13. Keyence / proface

    Good dat i have a trouble of having this errors.  Can i ask also a wiring config for keyence kz a500 to Pro face GP4301tw  Thanks in advance 
  14. Hi Guys! Is there anybody worked already with Proface panel and RFID reader ? Can anybody help me with that ? Even it is possible to use RFID reader on a Proface touch panel ?  The software what I use is RSlogix 5000 and of course, GP-PRO for the proface panel. Thank you so much for your answers.
  15. First time using Connected Components Workbench and am modifying an existing program,  does anyone know why and how the original IO_EM_DI_ numbers have been changed and not just the alias'. When I right click and select properties for each tag it gives the address and says 'Read only cell' generated by the I/O wiring tool indicating the I/O channel to which the variable is wired' Any help would be great thanks!
  16. Hello.. I have hmi Proface GP-4301TW, USB type B cable and ethernet cable. I want to transfer the program to the hmi but I cant. When I turn on the power of hmi,  a series of test appears and finally it looks like the photo below and I cant enter the offline menu.. can anybody help me to solve the problem?
  17. error HMI in proface GP477R-EG11

    Hi everybody, can someone help me, to solve my problem with commnunication error. ??? I have plc Q03UDVCPU using module QJ71C24N and HMI proface GP477R-EG11  using RS 422.. I had connected them but still error.. Side hmi that im connect is 10 RDA to SDA 11 SDA to RDB 15 SDB to RDB 16 RDB to SDB 7 SG to SG  
  18. OLD TCP HMI HELP

    Hello all I have a an old TCP HMI Model HMIWD100A2P  I am trying to figure out if there is any software out there to back it up and look towards migration.
  19. Hello, -I'm considering using an AB 1734-IB8 to count input pulses from a Micro Motion flow meter transmitter and, since I'm very new to this stuff, would like a little guidance as to how/if this can be done.       My first concern is the wiring. The manual for the transmitter shows this wiring diagram for the specific model I'm using.       Here, B would represent the 1734-IB8 module. I'm not going to be using the analog loop. In addition to this wiring, terminals 9 & 10 on the transmitter will be wired to the same 24V and Common as my PLC modules.        The 1734-IB8 manual shows this diagram for wiring.       Should I consider the pulse output of the transmitter as a 3-wire device, connect terminal 3 of the transmitter to my 1734-IB8 input terminal and disregard the connection from terminal 4 of the transmitter, or should I just tie terminal 4 to my common? Or, Should I consider my pulse output as a 2-wire device, tie terminal 3 of the transmitter to my 24V and terminal 4 to my input module? My guess is the pulse output should be considered a 3-wire device with terminal 4 of the transmitter tied to my common, but I'd like a little bit of explanation with this. -My second main concern has to do with the capability of the 1734-IB8 module to read pulses. More specifically, I would like to know what parameters of the module I need to research to see if it will be possible to read the pulses from my transmitter in the application I'm considering. If the 1734-IB8 can't be used, I would end up going to a high-speed counter card.   Thanks  
  20.   Hi, I am a design engineer for Teknek. We manufacture automated manufacturing equipment which is used around the globe. Our HQ is located in Scotland, west of Glasgow. We have two PLC based control systems that require further development to meet our customers’ needs.   The first of these systems uses a Panasonic controller. This system needs upgrading to a newer/better model of the Panasonic PLC and additional software development to enable the addition of networking capabilities for remote operation and monitoring via an ethernet link from a customer server, whilst maintaining the current functionality.   The second system we use is based on a ProFace controller. This also needs the addition of networking capabilities for remote monitoring – in this case to enable a remote operator to view the current state of the machine and see if any alarms are active. The hardware for this is already suitable so the development work would purely be software based. We have a further task for the ProFace system relating to modifying the current logic to add new functionality and the addition of a further digital output expansion module to facilitate this. These tasks are for different machines.   For both these controllers we are looking to for developers, experienced in the relevant system, to whom we could subcontract one or more of the work packages. We have budget in place for an immediate start.
  21. Hi everyone! Is it possible to connect between PLC micro850 with HMI Proface GP4000 series ? If it can do, can you show me how to do it? Thank you in advance!
  22. Hi Guys! I have an another question , I hope you guys can/want to help me. I have some problem with an proface panel. I want to make a hisotrical trend, but when I want to select the channels (tags what I want to monitor) I can't select anything, because undetermined. I think I should set the tags kind of a buffer list, but I don't find it. So my question is how can I set the tags. I can't changed it at all. If the answer is I need to make a buffer list, then where can I find it ?  Thank you so much. 
  23. Hello, I have a cp1h-y20dt-d (sinking output) plc supposedly to be wired to a servo controller. The pulse control method is Pulse/Direction. I've did some manual research on the PLC and found the following diagram attached Untitled. Since the diagram above doesnt show which terminals does it connect to in the CP1H side circled red, I want to ask if those connections belong to the following diagram attached Untitled1? If so, assuming im planning to use only Pulse Output1 (Pulse/Direction method) from the PLC side, is the connection from the first diagram no.1=CCW0- , no.2=CCW1- , no.3=COM (connected to -ve) *Note: these diagrams are from omron's manual SYSMAC CP Series CP1H-X40D_-_ CP1H-XA40D_-_ CP1H-Y20DT-D CP1H CPU Unit Your replies would greatly help. Thanks and best regards, Summer
  24. Analog Wiring

    I need to connect a analog amplifier with the analog input 0-10V on my Siemens 1200 PLC (located inside the same cabinet as plc, about 40 cm between). do i need a shelded cable? or just RK0,75mm2? do i use any special color on 0-10V?
  25. Greetings everyone, I have a Proface HMI(LT-4201TM Modular type DIO) connected to a siemens flow transmitter(MAG6000). Communication between these two devices is using modbus. The modbus register that im using to get the data/reading of a totalizer from siemens transmitter are 403022 and 403023. I managed to display the exact totalizer value from siemens transmitter on the Proface HMI screen. But I couldnt get the exact totalizer value at the ladder logic side, the value that i get at the ladder logic side seems like a raw value. For an example, the totalizer's value is 147083(real value), but at the ladder logic side the value for 403022=15598 and 403023=17316.   Can anyone guide me to solve this issue.   Thanks in advance.