Search the Community

Showing results for tags 'vijeo on Win7-64bits'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 25 results

  1. Hi ya,  can someone please advise if it is possible to add a text box that the user can enter a name / description to.  I am hoping the user can select the text box and a pop up keyboard will appear for them to enter a description on a magelis hmi.  I look forward to your advise. 
  2. Hi guys, I installed new MachineExpert v1.2 and Vijeo 6.2.9 on Win10 machine. When connecting simulation PLC to Vijeo to test my application everything is good. I go to PLC and check the nodename (see the pic attached) which I put in my Vijeo application and everything works. Issue is, because of my hard drive capacity I am forced to work via VM (but this is my preffered way also because of number of PLC softwares used). When I installed from the same installer (everything same as my local Win10) on Win7 VM when I run simulation I get empty space where the PC simulator should be visible which nodename I should type in Vijeo. Also I noticed when going to gateway management console in VM the process is active, same parameters as in host machine. Turning off the gateway on the VM turns it off as well on the host. Is there a known problem of connecting to simulator on VM? Or win10? Unfortunately I don't have Win10 VM to try right now.. Anyone can help? Much appreciated!
  3. Hello. I am trying to make a serial RS 232C connection between Schneider Magelis HMIGXU3512 and Omron PLC CP1E. However, there seems to be a communication problems between both of the equipment. I am using cable XBT Z9740 for the serial communication cable. The format used is 8.2.N for both equipment. The baud rate is 115200. No Flow Rate is choose. Anyone can help with this kind of problems?
  4. Hi, I've been having a problem with my Schneider setup, and I can't seem to figure out the problem. I'm using Machine Expert Logic Builder and Vijeo 6.2, and I can't seem to download to my PLC. I can download to my HMI just fine, but my HMI comes back with the message as mentioned in the title. Also when I perform a full download, machine expert comes up with the message "Could not connect to the device for item "xx", selected target system "PLC name" is different from the connected device "HMI name". The weirdest thing is that machine expert shows my PLC just fine, but doesn't show my HMI. I have no idea what to do, as I feel like I've tried everything. The IP range is fine, subnet is fine. The driver in IO manager in Vijeo has the PLC nodename in it, so that shouldn't be the problem either. Does anyone know what to do in a situation like this? Thank you in advance!
  5. This course is designed to equip the novice with no prior PLC programming experience with the basic tools necessary to create a complete PLC program using ladder logic common to most current platforms. Use Software : - Somachine EcoStruxure Machine Expert Basic - Free - Vijeo Designer Basic Full Articel About Lear PLC Schneider  Video Tutorial Learn PLC Training Free
  6. Dear all schneider Experts, anyone having "Vijeo designer screen editor"Software for XBT012110 megelis HMI. Please give a download link, I got very  stuck  to get this software #Advanced Thanking you......
  7. hi guys.  I am getting a server problem while communicating pc & scada . is there any solution to rectify it? or problem is in license? thanks in advance
  8. Dear Everyone can help     i have a batching system of about 12 materials and i need to generate a report for all batches in the day in runtime, i tried using SQL with Cicode but sometimes i can't find some material's data or to be Zeros. did any one here know a way to do that?? vijeo citect 7.4 thank you
  9. Hi my dear colleagues, I tried to configure data location for the text file used with text display. It works if loaded to main drive. But, if I point to secondary or optional drive the system doesn't even allow me to download the program to HMI. Error 1850..secondary drive not found. I noticed in the property inspector, that the windows for Secondary and Optional drive are grey. The Vijeo Designer V6.2 and HMIG3U with three USB ports (one mini and 2 usual) and one SD port are used.  May be, they are all disabled somewhere, with a hardware switch? But, even if the windows were active, I have no idea, what to put into them, to configure SD or USB as secondary or optional drive. Please, help. regards, Waldemar
  10. Hi, I am new to Vijeo. The task is to show different messages on HMI screen (I use Vijeo designer V6.2.5 and Magelis HMIG3U).  A new string variable "ToDoTxt" was created as an Array with dimension 2048. A StringDisplay was put on the screen and ToDoTxt[0] was chosen. How can I show other 2047 values, which depend on value of another integer variable "StepNumber"?
  11. I have a program that I as building in SoMachine V4.3 and Vijeo Designer 6.2. Everything is coming together well at this point but I can't seem to figure out if I can put a poteniometer type object on the HMI using Vijeo Designer. This will be used to control the speeds of some VFD that are connected to the PLC. I have found ways to use a meter or simple numeric input it change the WORD that controls the drive speed. I would really like to use a knob or slider bar as I believe it would be a nice function. I've tried it on two different Magelis screens that I will be using for two different projects. One is a HMISCU8A5(controller and HMI in one unit) and the other is a HMIGTO3510.   Thank You
  12. i'm working with vijeo designer and i have a problem with popup windows. I'm trying to make a popup window appear with a variable. A bool to be exact. I want that a popup window appears when the bool becomes 1. But so far i haven't found a way to do that. Can someone help how I could do that? It's the meaning that that bool becomes 1 when there is an error and that the popup window appears then to let the user know there is an error. Or does annyone have a better idea?
  13. Hello, We have this SCADA system Vijeo Citect 7.2 running in Windows 7. Primarily used as generator's alarm history & monitoring. PLC: OMRON C200HG All communications are good but DIGITAL data (alarms, bustie) from OMRON is not updating in real-time. (Need to restart the Vijeo Citect to make it work).  While BCD & LONGBCD datatypes (voltage, speed current) are working good and showing real-time *OFSVIJEO: INT datatypes are also working good. Protocol UNITY         MODNET30 OMRON      OMRON OFSVIJEO  MODCELL  
  14. We are communicating FX3GE PLC with Vijeo Citect SCADA. We tried various protocols such as MelsecNET, MelsecFX2N, Melsec1, etc. If you know how please help.
  15. Hi, everyone! I need to connect Modicon M238 (TM238LFDC24DT) with Magelis HMIGXO3501. I was not able to find any programming guide for this family of HMI's, so I kindly ask for a link, or maybe a PDF copy, For now, my problem is that I have SoMachine v4.1 with Vijeo Designer 6.2 installed, and the GXO family is not displayed in the configuration catalog.
  16. Hi everyone, I would like change user password on HMI GTO via Vijeo script. I don't know which variables store the password. Anybody as an idea? Thank you in advance
  17. Hello, I am responsible for implementation of Vijeo Citect 7.4 SCADA in my company. I want to connect to Beckhoff PLCs by using Twincat OPC Server. I can control and observe the variables through OPC Control tool, but when I add the device and variables to my Citect aplication, they are always equal zero. I cannot also force through Citect to change the value. I don't know where the problem lies. If you need additional information, please ask me. I will provide you with all the data I have. Thank you in advance. beckhoff_opc.bmp
  18. Hello there. I have connected wireless module (master) to Vijeo Citect 7.4 using RS-485 to USB converter. My slave modules are supplied power from gird/generator and the master module is supplies from a UPS.    I'm reading Modbus registers of slaves modules data via wireless master. Every time we have a power failure from grid, I get #BAD from all slave addresses. The generator kicks off within 30 sec. That is the slaves are off for 30 sec. Even after the slaves are powered on, SCADA does not poll data from it until I restart the SCADA.    My current MODBUS parameters are:   Inittype = 3, TimeOut = 3000, WatchTime = 10, Retry = 2. Could you please assist me on which parameters to change in .ini so that SCADA reads Modbus registers of slave for more than 30 sec.   I tried increasing TimeOut to 30000 but it couldn't solve the problem. I would appreciate if some one could help me out.   Thanak you in advance.      
  19. hi i am using vijeo citect 7.4 i generate a report automatically using a triger but the report generated in the .rtf form which any body can change the values in the report so i want to either make the report in the read only form or convert it automatically to pdf + i ' ve another problem i am tring to write a string in the report using the form {tag_name:############} where the tag_name is a variable string memory where i store in it a word "starter" when the report is generated only two letters "st" is generated can any body give me a solution for these two problems , thanks in advance .
  20. I am struggling with the following problem: We have a Momentum PLC running with a project downloaded from Concept 2.6. When I make a small change into the project and I download the change to PLC there seems to be no problem. But when I try to run a visualisation project in Vijeo Look then after any click in visualisation the yellow triangles with red crosses appear over every object on the screen. We run OFS to enable communication between PLC and Vijeo Look. We use non-allocated variables in the project and probably the Visualisation does not work well with those unallocated variables after project changes. Can someone please describe steps which need to be taken to compile or upload a Concept project so that it works well in Vijeo Look with unallocated variables?
  21. How to save vijeo Project on other Version of this program (lower Verion)? Any Help Appreciated.
  22. How to Export Vijeo Variables to an Excel Sheet? Thanks
  23. Hi All I'm tasked to create operator screens for the Magelis HMI touch panels, using Vijeo Designer(v6.2). I would like to animate an object based on information (metadata) from a variable. Typically "Variable_xyz.HiHi". How can this be achieved? I have gone through most of the help documentation but cannot find a way to retrieve metadata. Any help would be greatly appreciated. Regards Juan
  24. Dear All, I have a little problem in reading data from Power Meter to Vijeo Citect v6.0 I'm using Schneider PM810MG for Energy reading from Power Meter and for the SCADA I'm using Vijeo Citect v6.0. I can do some simple data reading like current, voltage and the others using variable tags from Vijeo Citect with Data type INT. But i dont know how to read the data for "Real Energy In" since the data range from 0 to 9,999,999,999,999,999. Waiting for all your help soon. Thx. Best Regards, Budiman Chandra
  25. I need to install Vijeo designer on Windows 7 - 64 bit but I can not find the link. Please advice. I have two vijeo CD , both gives me error during installation .