Search the Community

Showing results for tags 'vijeo designer basic'.

  • Search By Tags

    Type tags separated by commas.

  • Search By Author

Content Type

Find results in...

Find results that...


Date Created

Last Updated

Filter by number of...

Found 176 results

  1. This course is designed to equip the novice with no prior PLC programming experience with the basic tools necessary to create a complete PLC program using ladder logic common to most current platforms. Use Software : - Somachine EcoStruxure Machine Expert Basic - Free - Vijeo Designer Basic Full Articel About Lear PLC Schneider  Video Tutorial Learn PLC Training Free

  2. GT DESIGNER 3 - "SCREEN ERROR"

    Rodrigo_L posted a topic in Mitsubishi

    Hey guys, I am trying to fix a problem with a machine for plastic jerrycans production, that i bought in the end of 2017 from a spanish company. That company refuses to help and assist us so i had to search for other solutions.  In short: i need to change a fixed value on the SCADA program of the machine to a variable value and i want to change it on the terminal i have installed on the machine (GOT 1000). The problem is dat whatever i change on the gt designer 3 file (if i move a button or a lamp 1mm to the side or change a letter) and then write it to GOT, when i try to open the screen where i did the modifications i get a white screen saying "screen error". Only replacing the new file for the original one i can continue to use my GOT 1000 normaly. I also wanted to translate some of the words because most of my employes dont know how to speak spanish and have some dificulty using the terminal correctly... I am corrently using 1.37P version of GT Designer 3 but the original file dat came already installed on the GOT was 1.165X.    
  3. Dear all schneider Experts, anyone having "Vijeo designer screen editor"Software for XBT012110 megelis HMI. Please give a download link, I got very  stuck  to get this software #Advanced Thanking you......
  4. hi guys.  I am getting a server problem while communicating pc & scada . is there any solution to rectify it? or problem is in license? thanks in advance
  5. Hi gays. I have a problem with my indradrive when I try to jog a Rexroth MSK motor. Indradrive: HCS02 (Basic Universal, single axis), control unit: CSB01.1C-SE-ENS-EN1-L1-S-NN-FW     &      power unit: HCS02.1E-W0012-A-03-NNNN Servo motor: MSK100B-0200-NN-S1-BP0-NNNN For joging (testing the motor in closed loop servo just with pc), I think need to run easy startup mode under the commissioning tab of indraworks software. (or am I wrong?) I connected the drive  via serial interface (out of the drive X2 connector) to my pc, and connected the drive to motor encoder port (out of the drive X8 connector).  I power on the drive (via X13) and go to easy startup mode, I face an "F3130 Error when checking input signals" alarm which I can not clear till now. referring to online help  I find some remedies declares that the problem arise from wiring. I tried to examine X41 connector with supplying 24v to it in various situations. but the mentioned alarm is resisting. anyone can help?   

  6. TRANSFER FROM NS15-TX01B-V2

    Kiiza posted a topic in CX-Designer

    Hello Forum,We have a NS15-TX01B-V2 at our Plant in Uganda which we are using with a CJ2M PLC. We want to take backup from the PT to PC using Ethernet but we have not succeeded yet. We have consulted the manuals but they are not very elaborate. Someone here may know the step-by-step procedure we can  follow. to achieve our goal. We shall be very grateful.Thank you.
  7. I have a NB7W HMI connected to a CPIH over RS232. I'm connected to the HMI over USB and when I try to download my project, it starts the downloading GUI process and fails at a random time and shows a popup that says "data reading error". The HMI is locked up at this point and needs to be restarted. This is a fresh HMI and has not previously had a program on it. I created a blank project to make sure I didn't do anything weird in my program, but got the same result when I tried to download. Has anyone experienced something like this before? Its made it as far as 50%, and has also failed almost immediately.   Thanks in advance. 

  8. CC-Link IE Field basic master

    Achey posted a topic in Mitsubishi

    Hi every one, I'm new here. Is there any CC-Link IE field basic master or simulator that can be use on Windows PC, for testing  CC-Link IE field basic slave communication ?   Thanks in advance    
  9. Hi Guys I was wondering if any one of you could tell me how to set up some basic button functions? I need a basic instruction on how the followering button setup, could be done on the HMI, preferable with exaples or tutorials etc. !!! I´m working with the current setup: NX1P2, using Sysmac Studio, Module version 1.25.1.0, along with a NA5-Terminal, version 1.18 !!!  START_VALVE_1_BUTTON = Toggle, Momentary, Set or ?? - (Need the START_VALVE_1_BUTTON to activate ON_BUTTON & OFF_BUTTON flashing, indicating selection option, ON or OFF, meaning activating start valve 1 mode, or deactivate the mode). START_VALVE_2_BUTTON = Toggle, Momentary, Set or ?? - (Need the START_VALVE_2_BUTTON to activate ON_BUTTON & OFF_BUTTON flashing, indicating selection option, ON or OFF, meaning activating start valve 2 mode, or deactivate the mode). ON_BUTTON = Toggle, Momentary, Set or ?? - (Need the OK_BUTTON & the OFF_BUTTON to flash simoustaniously, after START_VALVE_1_BUTTON, or START VALVE_2_BUTTON has been pushed). OFF_BUTTON = Toggle, Momentary, Set or ?? - (Need the ON_BUTTON & the OFF_BUTTON to flash simoustaniously, after START_VALVE_1_BUTTON, or START VALVE_2_BUTTON has been pushed).  !!! Hoping to hear BACK from some of you VERY soon, because I need the know_how ASAP. !!! !!! Write soon !!!

  10. Cognex VC5 Vision Controller

    ButcherEngineering posted a topic in Omron

    I'm looking for some help in regards to programming an Omron PLC (CX-Programmer) to control a Cognex VC5 Vision controller to trigger CIC5000 cameras. I have the Ethernet/IP mapping and I am able to send user data to the VC5 controller at this point. I believe there a steps I'm missing within the Cognex Designer program to send notifications to the PLC but I'm not sure where to start. Any help in pointing me in the right direction is much appreciated.
  11. Insert existing attachment A lot of automation cells we get done are made outside of shop so we don't typically have any current acd files for the plc. I am trying to make changes to the program but uploading seems to be giving me some problems. The initial upload seems to work fine I can select a file to save to and I begin to see the file being upload, the problem comes after about two minutes near the end of the upload. Attached is the error I see after the upload stops. Has anyone seen this problem before and know of a solution? Any help would be appreciated. Current controller Studio 5000 Logix Designer 28.03.00 1756-L71S
  12. Dear Everyone can help     i have a batching system of about 12 materials and i need to generate a report for all batches in the day in runtime, i tried using SQL with Cicode but sometimes i can't find some material's data or to be Zeros. did any one here know a way to do that?? vijeo citect 7.4 thank you
  13. HELLO GUYS . I am new in mitshubishi HMI gx designer 3.I have made simple program in which memory bit m0 is used to start counter (limit 5) and M1 bit is used to reset counter. Now when i press reset switch (M1) first it will ask for password then it will reset counter. how can i do this..please suggest. thanks 
  14. Hi. I am new to Allen Bradley PLCs and bumped into the following issue, that I cannot find any solution to. When trying to add a module to the I/O configuration I get the attached error, error code 80131940. This prevents me from adding any hardware configurations in Logix Designer. I have tried to reinstall Logix Designer and uninstall all AOPs. I am running V30.00.00 on a Windows 7 Enterprise SP1 OS. Your feedback is very much appreciated.
  15. Hi my dear colleagues, I tried to configure data location for the text file used with text display. It works if loaded to main drive. But, if I point to secondary or optional drive the system doesn't even allow me to download the program to HMI. Error 1850..secondary drive not found. I noticed in the property inspector, that the windows for Secondary and Optional drive are grey. The Vijeo Designer V6.2 and HMIG3U with three USB ports (one mini and 2 usual) and one SD port are used.  May be, they are all disabled somewhere, with a hardware switch? But, even if the windows were active, I have no idea, what to put into them, to configure SD or USB as secondary or optional drive. Please, help. regards, Waldemar
  16. Hello I have an old test rig (hydraulic cylinder applies pressure to a crank in sawtooth pattern) project written in gx developer for the Q03 plc. To this plc is connected a 1041 beijer panel, I have uploaded the project to E-designer. I am rewriting the sequence code because a new but similar test is prepared. Have a PID-block in gx works 2 (not in a simple project sadly) i would like to import  and use in gx developer. This is causing me some trouble though.  Can anyone tell me how to get the PID-blocks from GX Works 2 to GX Developer? Do you recommend me to upgrade the project to GX Works 2 instead? How will the panel react? I need to reprogram this as well. Cheers // Rolf
  17. Hi, I am new to Vijeo. The task is to show different messages on HMI screen (I use Vijeo designer V6.2.5 and Magelis HMIG3U).  A new string variable "ToDoTxt" was created as an Array with dimension 2048. A StringDisplay was put on the screen and ToDoTxt[0] was chosen. How can I show other 2047 values, which depend on value of another integer variable "StepNumber"?
  18. I have a program that I as building in SoMachine V4.3 and Vijeo Designer 6.2. Everything is coming together well at this point but I can't seem to figure out if I can put a poteniometer type object on the HMI using Vijeo Designer. This will be used to control the speeds of some VFD that are connected to the PLC. I have found ways to use a meter or simple numeric input it change the WORD that controls the drive speed. I would really like to use a knob or slider bar as I believe it would be a nice function. I've tried it on two different Magelis screens that I will be using for two different projects. One is a HMISCU8A5(controller and HMI in one unit) and the other is a HMIGTO3510.   Thank You
  19. I am using NB Designer for last one year without problems. But from last week i am getting new error Background PLC control recorder 0 error! while compiling and not able to update the HMI. Please help.
  20. Hi guys,  I have been trying to sync up my RSLogix 5000 tag to GT Designer 3 (GTD3) objects but I noticed that GTD3 only recognize certain native data types from Allen Bradley Logix5572 Controller (Model 1756-L72).  In the documentation that I found, it show that certain AB Native Tags are transferable to GTD3 Data Type (See the attached file "AB Tags to GTD3 Tags" ) One of the User-Defined Data Type from the RSLogix 5000 that I am trying to sync to Text Display Object in GTD3 is called "UDT_MY_CLTR_INFO" here is it's hierarchy of inheritance from RSLogix 5000     Name                                                                     Force Mask                                                                                   Data Type MY_CLTR_INFO                                                     (...)                                                                                                 UDT_MY_CLTR_INFO      MY_CLTR_INFO.NAME                                                                                                                                           STRING           MY_CLTR_INFO.NAME.LENGTH                                                                                                                      DINT           MY_CLTR_INFO.NAME.DATA                                                                                                                           SINT[82]    In my exported tag which is a CSV file, it doesn't list the sub-classes MY_CLTR_INFO.NAME, MY_CLTR_INFO.NAME.LENGTH, and MY_CLTR_INFO.NAME.DATA, it would only list MY_CLTR_INFO.  How do I link up my "Text Display" Object in GTD3 with the tag "MY_CLTR_INFO.NAME" whose Data Type is STRING and GTD3 does not have a STRING Data Type?  I appreciate anyone that took their time to read my problem and any attempt to help me out. Thank you. 

  21. NV-DESIGNER SIMULATION

    Omron Learner posted a topic in Other Omron Software

    Hi. I am barely new into programation and I just wanted to know if there is a way to simulate an 3'' inch HMI (based on NV-Designer), since I don't have the HMI itself. Thanks in advance.
  22. Hello, We've been having problems transferring a project (send or receive) in E-Designer. To give a bit of background... I work in IT and my end user used to have full admin access to his computer but we have recently had to remove he's rights and since then he hasn't been able to talk to the HMI. We know there's nothing wrong with the HMI or laptop (when full access is granted) as it work perfectly. I don't know much about E-Designer or the HMI\PLC's that our users connect to so I was hoping to gain a bit of knowledge here so I can work out what is going wrong. When the user tries to transfer a project the errors come up (See Attachment) please note that it works perfectly when full rights on the laptop are applied. Also, would any one know what exactly is happening in this process? I can see that E-Designer can see the HMI so there is a connection but clearly can communicate properly. Is it trying to download files somewhere the user doesn't have access to? is the OPCDriverConfig1.cfg info a clue? Thanks for your time!
  23. Hello guys, I need help. I have an OMRON PLC; CJ2M series which I am not very familiar with. I need to do comparisons, but I see that do that I can't just compare with a value. It looks to me that I have to store the value I need to use to compare in a memory address and reference to the memory address for my comparison.  Is it possible for me to compare using a value and not have to first go through a memory address? Is there a way to use the instruction to store the value in a memory location ? Or do I specifically have to use CX-Designer for me to wrote the value to a memory location? Thanks in advance.
  24. Hi PLC programmers, I got a problem regarding my installation of Logix Designer/Logix5K. Here's the situation... a) Initially installed Studio 5000 without problem. b) I needed to open a program from Logix v20.1, installed RSLogix5k v20.1. After installing v20.1, RSLogix was corrupted and won't open program. c) Reinstalled entire Logix Software. d) Was able to open and convert program from Logix5k v20.1 to Logix Designer v24 but this annoying error occured on v24 (See attached "EN2T")... "Failed to Create Module Profile". All of a sudden, the module (1756-EN2T) I created with working v24 is no longer usable. Now, even when I create a new project, add a module with "Select Module Type", the list of available modules has been trimmed down to what it normally has (see attached "AB_Modtype"). Kept on re-installing entire Logix 3 times, clearing the registry with CCleaner and even deleted installation folder for Rockwell software but the problem is never gone. I even downloaded AOP for EN2T and installed it but to no avail. Now I'm lost and dumbfounded that uninstalling and reinstalling isn't working. By the way the OS I'm using is "Windows 7 Enterprise". I appreciate all the help I could get. Thank you very much. Sincerely, Andrei K.
  25. Hello there, I've done some reading through GT Designer3 Version1 Screen Design Manual (Functions) and in chapter 30.3.6 - Program examples I've found functions used like: redraw_object(); d_circle(params); or acces of object params via script like my.active = 0; my.text_color = 0xE0;   So, my question is, does anyone of you have/know about documentation for this advanced stuff, it could be real game changer for me.   Thanks in advance for any reply