Search the Community

Showing results for tags 'version change'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 36 results

  1. Change Management LogIn(lost password

    I cant able to make any changes on the points (datatype from INT to DINT) on cimplicity workbench  everything thing is greyout!! i checked and found that the workbench has a change management logOn option asking to logon! Which asks for user name and password!! And No one here Now has the user name or its password!! what to do now on such cases , Also on doing modifications on logic developer validating project generates error  may be due to mismatch data type of that associated point on workbench.
  2. Highlighted line in GX Developer

    Working in GX Developer Version 8.107M, some of the code that I have been working with seems to be hidden.  It appears that the lines turn highlighter yellow, keeping me from viewing code.  I've looked into this and cannot find a solution.  Does anyone know how to expand the code? Thank you.
  3. Hi, I was wondering if it's possible to detect a changed/updated value in a data block even if the value remains the same as before. The reason I ask is because we have a SCADA system providing a setpoint for a temperature every x minutes. The value of the setpoint can remain unchanged for hours even days. However we still want the PLC to be able to detect wheather it's setpoint is updated every x minutes or not. Any good solutions? Thanks!
  4. GT2708-STBA

    Hi. I have a GOT 2000 (GT2708-STBA ) with the version BootOS 1.17.00.R001.-Z i need to change versio more old.    How do I make the change?  
  5.   I need the Add-on to the modicon M258 with version 2.0.31.15  Where can i download i am not finding the site of schneider  
  6. Hey Community, i would like to know if its possible to change the designe of the keypad in FTView which pop up at entering a numeric variable. There is a screenshot in the attachment. Thanks in advance!   Mit freundlichen Grüßen, Best regards Adrian Düringer  
  7. Hi, Where can i find version release notes for sysmac studio  latest version   -GS
  8. Hello,I am trying to use ProWORX NXT to view the logic of my Modicon Quantum 534 controller online. When I try to go online with it, it always times out. I am using a TCP/IP connection and my PC is in the same subnet as the controller in question. I can ping the controller's IP address just fine and when I use ProWORX NXT's Net Scan function, it recognizes that there is an Ethernet connection at that IP address but doesn't recognize it as a Modicon controller.Weirdly enough, my PC can connect to another Modicon controller of the same type and in the same subnet just fine.Can anyone help me with this issue?
  9. I am in the learning phase of HMI and PLC programing and am trying to use some of the hardware that has been donated to me. I have an AB panelview 300 micro terminal and a Micrologix 1000 Plc (they are not tethered yet). I have constructed a small test board with everything mounted to it and have successfully written and downloaded a simple project to the plc with timers, etc.   Now I need to find a way to program the terminal to make changes to the program.   I am looking for some free panelbuilder 32 or anything that will allow me to program the terminal and use it.   Can anyone help me? All help will be greatly appreciated!
  10. Good morning, I'm having an odd issue with CX Programmer and have hit a wall. I'm trying to upload a previous version of a program to an existing PLC (CS1G-H CPU42) and I keep getting the following error when I compile while online: "The read protection properties which are not supported by the connecting target PLC are set. Check the unit version of the PLC." This prevents the program from being uploaded. I have a first revision CS1, manufacture in 2005 from what I can tell. This exact program has been uploaded previously, but a modified version replaced it recently and I need to go back to the older version. Things I have tried so far. without success: - Removed UM Protection - Made sure Task protection is off for all tasks - Check DIP Switch #1, which is write protection, and made sure it is off - Used "Remove Password" and "Release access" functions from the PLC/Protection menu - Used the auto-verification to confirm the configured PLC is correct - Reuploaded a full backup of H & D memory, from the older program I am able to compile the program when offline, but it chokes when online. I am connecting to the PLC via a serial cable. I haven't found any help from the CX Programmer help, or the CS1 programming and operation manual. This error message is nowhere to be found. Anyone has a clue ? I'm at a loss right now. Thank you !
  11. Hi, I have a challenge with GX developer version 8.63R (SW8D5C-GPPW-E). I'm trying to verify 2 projects (offline). Some programs I know there are changes but they are not shown in the verification. In 1 program I did see the last checked change was in step 1496 (next change I did see by manual check was step 1502. it seems like this type of verification is limited to 1500 steps to check. Is there any way I can make this offline verification work? the most progams that we have in our project are over 2000 steps. big thanks in foreward