Search the Community

Showing results for tags 'user web interface'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 35 results

  1. Connection cable for Sinumerik810

    Hi, I am trying to connect my M2 pg with a Sunumerik 810 cnc.    does anyone have the part number or pin out of the 25 pin-25pin tty cable that’s needed for this.    thanks   
  2. Does anyone have any tips or tricks for generating UDT Templates from an excel spreadsheet? It says in the help files you can copy/paste from excel into the UDT Template, but it seems to only allow that cell by cell, instead of the whole table of data. This is painfully tedious when building larger interfaces. I've tried saving the spreadsheet in various formats (CSV, PRN, tab delimted txt) and I've tried various versions of RSLogix from 23 to 31. I can't seem to find any detailed info on how to do this. I've seen some other forum posts regarding using scripting to generate the XML to import the UDT, but I don't understand why I can't simply copy and paste the info in. Is this really that difficult? Any help would be greatly appreciated. Thanks Otto
  3. Hallo.  Can someone shed some light on how much memory st takes ? does it use more that traditional ladder? i find that a routine with a couple of thousands of lines uses over 500kB is there any tricks to lower the usage? Or is it just what it is, and buy bigger cpu’s
  4. There have been many good discussions on the applicability of cloud-based solutions for manufacturing and process control systems. On one side, some people have concerns regarding security and control of the information, on the other side, there are identified benefits enabled by cloud systems. From VMS minicomputers to DOS and Windows, from ArcNet to Ethernet, it is inevitable the industrial automation systems shall adopt the technologies that are getting predominant in IT general use; the current environment that I am calling the “Cloud-iPad era” is no different; therefore the practical discussion is not if those new technologies will be applied in the industrial environment, but how. This paper is not intended to join the conceptual discussion about the cloud, but just to present a few simple practical examples, where cloud technologies are already enhancing industrial automation solutions and enabling new business opportunities. CloudPracticalApplications.pdf
  5. MTA10

    I need to replace MTA10 interface. How to transfer program to another one?  
  6. Does anyone have any experience with the recently released user web interface for the iQ-F and iQ-R series. Supported by GX Works3 version 1.047Z or later, the firmware Version 1.100 or later. We have the sample user web interface running in a FX5U, its working very smoothly. I am currently looking into how to edit the html page, does anyone have any tips or useful tools/resources that I could use to work things out.       iQ-F Customer News regarding FW Update 08-2018.pdf
  7. Communication

    good evening. Someone can give tips on how to configure and physical the application with the following items: Advanced Interface Converters (AIC +), PanelView800 2711R-T7T A and MicroLogix 1500 Programmable Controllers My doubts are about the configuration of the communication, and I have doubts about the physical environment and protocol to be used.  
  8. Hi  How can I log the user action  at citect scada 2016 v8.0  I wan to log what the user done on scada like alarm acknowledge, disabiled or eneblied, enter any new valu of signal... ect..   Any Help Will be great  Thanks from now  Best rigards.
  9. PLC Training

    Hi Everyone We are setting up a initial training in PLC programming for technicians, I got some experience with SIEMENS S7 but this seems to be an expensive choice, we would like to opt for a budget PLC but at the same time would like a user friendly software for teaching......I would like to have views of users of other PLC brands such as OMRON, MITSUBISHI or even Schneider??? thanks Jay
  10. Dear All, Currently I am working on a project in which I require a Customized User Dialog..I searched for that in Forum but didn't got any solution..So I would request you all to pls guide me regarding this Asap.. Thanks, Krishnakumar Mishra
  11. Dear All, In one of my projects I need to login in HMI via Windows Linked Users i.e. Domain Users..I have never done this before & don't I have any sort of idea regarding this..This is possible in Rockwell HMI's but not sure about Beijer IX HMI's.. So if anyone has done this pls do let me know.. Thanks, Krishnakumar Mishra  
  12. My client is a pharmaceutical company and they want to interface their Blood Gas Analyzer (which is a RAPIDPoint 500) to a Controllogix PLC via EtherNet. I have attached a Spec that I found, which gives the initial information you would need to do this. It says that the BGA can transmit data in ASCII. However, it doesn't list what bits I need to send to the device in order for it to send the PLC the data. I've tried contacting Siemen's (who makes the BGA) and they were useless. I also tried searching the RA knowledgebase.  Does anyone have any insight on how to communicate with a device in this way? Thank you Tyler RP500_LIS_5_20_13_-_Rev_C_.pdf
  13. Actuator Sensor Interface

    I first saw AS-i at a factory this week and am trying to figure out what Allen Bradley modules can interface it. I am not finding anything, does AS-I go under some different name?
  14. Hello Guys, I Need some information about conncting method between cx-programmer and cx-supervisor? Anyone can explain? Please help me! thank you.
  15. [Manuals] - 3G3HV User's Manual

    3G3HV User's Manual View File Older Omron AC Drive Submitter Michael Walsh Submitted 10/03/17 Category Manuals
  16. 3G3HV User's Manual

    Version I515-E1-3

    7 downloads

    Older Omron AC Drive
  17. Hi all, I need your help on Factory Talk issue, also for Factory Talk Transaction Manager, I suppose is the same reason.  Windows 7 - 64 FTV SE 7.00.00 FTTM 10.10 I'm Windows administrator. ****************** Factory Talk Issue: Error message: (Error:0x800706ba) Error Failed to load VBA project display cannot be opened at run time. (This is the error to open the first display). Message from Rockwell knowledge database: Error in the OS event viewer mentioned domain controller cannot be accessed to authenticate user. ***************** FTTM Issue: Can't Start with Services. Error message: The Services could not be validated using the specified username....
  18. Problem with Ethernet module CMM321

    Hi, I am new in the group and also a new user of PLC series 90-30 an we have a communication issue. I want to know how to go to baseplate configuration window through Cimplicity machine edition?
  19. Beckhoff and AS-Interface

    Hi, I’m trying to control 10 Safety switchgear using AS interface, and since I’m using Beckhoff as a PLC I want to use "KL6211 | AS-Interface master terminal" as a Gateway but since this is the first time I’m using Beckhoff I’m a bit lost, So my questions are: -          Is it a good idea to use a Beckhoff ASI terminal? -          How to configure it? -          Is there a possibility to configure it using embedded PC ( I’m using CX2030)? Excuse my English.
  20. Input number from user to Compare?

    Hello! I want to make a really simple PLC program that compare 2 number. How can I load 2 numbers from user and send to PLC compare operand? Now I go to CMP and with mouse set values. There is any "imput" component in CX Designer? Sorry my poor english :S Thank you!
  21. Analog module configurations

    hai everyone im new to this forum, i hope this forum will clear all my doubts about plc Ok Guys my doubt is How  to connect two, three, four wire sensors to S7 PLC's? Please help me guys im new to PLC Controlling Thank you.
  22. Programming a HMI to revert to Home Screen

    Hello everyone, I was wondering if anyone here could explain to me how I can program my human-machine interface (HMI) to revert to a Home Screen after a period of inactivity. If the user has to leave at any time, and leaves the HMI on the last screen he/she was working on, I want the HMI to revert back to my Home Screen after 60 seconds inactivity. Has anyone here done anything similar to this before? Do you think it's worth the trouble of having such a function built into the HMI? Thank you for your time and for reading.
  23. Hi everyone, I would like change user password on HMI GTO via Vijeo script. I don't know which variables store the password. Anybody as an idea? Thank you in advance
  24. Hi guys, I'm in the middle of a little university project, I'm attempting to implement a control system purely based on artificial intelligence. A neural network will be used to map the characteristics of a power plant. A fuzzy logic controller will be used instead of the conventional PID and finally a genetic algorithm will be used to tune the controller while the system is online. This is all simulated of course. Each of those AI's will be developed in Matlab. Only problem with that is, is it outputs the code in C or C++ (From memory). I would have to convert this to structured text (Based on Pascal). So to circumvent this problem I thought I would just directly interface matlab to the PLC (Schneiders M340).  My idea being, all the calculations are done in matlab which are then sent back to the PLC. However this presents me with a new problem of how I would be able to interface matlab to the PLC. If anyone has experience with this sort of connectivity, any advice would be greatly appreciated. Thank you in advance, Luchek
  25. Hi I have a big issue with machine user access using loggin and password. There are different levels of login (operator, maintenance and admin) locked with physical key or password. The problem is that whenever any other user sees the password or got the key he can use it later. Is there another efficient way to lock the access and may be record who is logged when and how? Thanks