Search the Community
Showing results for tags 'timer vijeo designer'.
Found 198 results
-
I am struggling with the following problem: We have a Momentum PLC running with a project downloaded from Concept 2.6. When I make a small change into the project and I download the change to PLC there seems to be no problem. But when I try to run a visualisation project in Vijeo Look then after any click in visualisation the yellow triangles with red crosses appear over every object on the screen. We run OFS to enable communication between PLC and Vijeo Look. We use non-allocated variables in the project and probably the Visualisation does not work well with those unallocated variables after project changes. Can someone please describe steps which need to be taken to compile or upload a Concept project so that it works well in Vijeo Look with unallocated variables?
- 6 replies
-
- Vijeo Look
- Concept
-
(and 2 more)
Tagged with:
-
FB_TIMER_ON_OFF The FB is a part of RTC library and implements a timer, based on RTC, for ON and OFF a control bit, e.g. to turn ON/OFF a load in the time interval, and can be easily added into your program in desired quantity. The FB is supplied with E (Enable) input, EO (Output to Control Bit), and can operate in one of two modes: HMS = Hours + Minutes + Seconds (daily timer) MDH = Month + Date + Hours (yearly timer) Each setpoint of ON and OFF time settings should be represented as Array of INT [0...2] type and contain a time data according to the chosen mode. Thus, for example: - in HMS mode: a control bit can be turned on at 02:03:14 am and then turned off at 06:04:17 pm, or turned on at 05:12:27 pm and turned off at 07:06:22 am; - in MDH mode: a control bit can be turned on 3th February at 02:00 pm and then turned off 4th June at 05:00 pm, or turned on 12th November at 03:00 pm and turned off 6th March at 10:00 pm. If the values of both time settings are the same, the FB output will not be activated. Supporting PLC CPUs: All FX Program memory: - 34 steps per each FB instance - 4 steps for entire project (reading from RTC) System variables: M - 3 bits (for entire project) The library is compatible with GX IEC Developer and GX Works2 software . https://plus.google.com/105445006108716761629/posts/Z4v4F11s4Bz
- 2 replies
-
- User library
- Timer
-
(and 3 more)
Tagged with:
-
I have an interesting problem. On my NQ HMI, I am changing one bit of the alarm word to true. The first time I do this, one alarm becomes active, and appears in my alarm list on my HMI. Then when I change the bit back to zero, the alarm becomes inactive. Then when I make the bit true again, the alarm does NOT become active again. Nor does a new alarm appear at the top of the list. What do I need to do to make a fresh alarm appear in the list? Any input would be greatly appreciated. Thanks in advance.
-
Where can I safely download NQ designer? Thanks in advance.
-
Turning inches traveled per pulse (a real number) to inches per minute
487mcgill posted a topic in Allen Bradley / Rockwell Automation
I am currently trying to get my program to take distance traveled per pulse, which is based off of the diameter, and convert it into IPM. I am using RS Logic 5000 software. If anyone could help me get over this hump I would really appreciate it! -
Hi Guys I'm new to Omron PLC's and the NB HMI series terminals. I have a question regarding the status of a currently logged in user. What memory area bit can I check to see if a user is actually logged in ? Secondly, where can I find a document that shows the memory areas and any system words/bits ? I found bits and pieces here and there but nothing that shows the memory area layout in full. Regards Steve
-
Hi Can anyone help with changing timer values in a C40K using syswin and a host link3G2C7-LK201_EV1. I have tried clicking Editors, Data display editor and then T/C VAL. This then loads all the values into the display window. Double click the required Timer and a new window opens up with the value. Changing that value and then clicking ok and then writing the value to the C40K. This does not appear to change the value because if I then read the values back I still have the original value and not the one I changed it to. Hope this makes sense. I assume that it should be possible to change the values using this method. I can change the values using the hand held console
-
Greetings! I just have one question. Is it possible to get pulse time down to 5ms? I have only been using down to 10ms so far. Im using the M8011 timer memory. Thanks in advance! Best Regards Henrik.
-
Hi everyone, Im quite new into OPCs, I'm using adam 4015 6channel RTD module to measure temperatures and then connected to adam 4520, I would like to know how to connect the adam modules to cx designer (or if have to make any program in cx programmer) as i want to have a GUI of the temperature measurement. Thanks in advance
- 1 reply
-
- cx designer
- cx programmer
-
(and 2 more)
Tagged with:
-
Conditional increment after every five seconds
ritzspeed posted a topic in Allen Bradley / Rockwell Automation
I want to build a logic in ladder diagram in RSLogix 5000 v16/v17 where an analog output is intially set to 10%. Two analog inputs are continuously being read and being compared to some respective threshold values, and if any of these two inputs are less than their respective threshold values, the PLC has to increment the analog output by 2% every 5 seconds. The effect of the analog output increment is reflected on this two analog inputs. If both the inputs reached their respective threshold values, turn on an LED lamp. Let me make it simple to understand: Let A = analog input1 B = analog input 2, C = analog output initially C = 10 after 5 seconds if A < 22 OR B < 36, then increment C by 2% if A < 22, B = 36, then increment C by 2% if A = 22, B < 36, then increment C by 2% and if A = 22 or greater and B = 36 or greater, turn on LED lamp do this (increase C by 2 %) every 5 seconds until both the inputs are equal or greater than their threshold values, i.e. A = 22, B = 36. The analog output must be set at increased value until next increment is given I've tried this using timer, timer done bit, timing bit, enable bit all, but did not success. The PLC doesn't increment after 1st increment, my logic is faulty. Any help would be appreciated. Thanks :) -
Automatically save-as-JPGs all screens from NB Designer?
ct8356 posted a topic in Other Omron Software
I know that I can printScreen screens one by one from the offline test in NB Designer. I was wondering if there was a way to automatically save-as-JPGs all screens in a project? (Just like you can do in CX Designer.) -
I'm new to Omron, and after several days of diving into manuals trying to figure this out on my own and giving myself a headache I've come to accept that i need help. my task is the following: Control of the discrete and analog inputs/outputs in a DeviceNet system using an Omron CJ1M PLC’s and PT’s. Use at least one thermocouple, one analog input, and one analog output for the DeviceNet network. Use a pushbutton and a light for the start of the process and an indicator for the started process. I have a Drt1-Ad04 input, a Drt1-ad02 output, and a Drt1-ts04t temperature control. My devicenet is Cj1w-drm21, The Omron system itself is a cj1m-cpu13 etn21. I have node addresses for my input, outputs and temperature control, those being 35 for input, 25 or 30 for output and for temperature control 5, 15, or 20. The ip address im using for this project is 142.214.143.9I'm using Cx programmer, Designer and Integrator. On Cx programmer I've managed to create an IO table but i have no idea on how to begin the program or even get a current reading from my generator.On Designer I've made what i believe to be the layout of the pushbuttons, I just have no idea of what addresses to enter.And on integrator i'm having troubles on figuring out how to make a routing table. I've went through many manuals and either i'm missing something really basic here or I just have no idea on what I'm doing. The only advice I was given was to dive into more manuals and find my addresses for my inputs, outputs, and temperature or to find the information from an outside source be that a forum or customer service. I am able to provide more information, and screenshots of what I have done if needed. Any kind of help would be greatly appreciated!
-
- Cx Programmer
- Cx Integrator
- (and 8 more)
-
Hello, I need to set a 1 second timer in a TSX 572623 plc with pl7 pro, the question is that using %s6 bit (1 second pulse) the timer is not exact enough, the program is 98 kb, not too big I think, I use the %s6 attaching to a positive pulse auxiliar mark in one section of the program and i use this mark %M in the rest of the program, but as i said, it is not quite exact, measuring the time displayed in a HMI connected to the plc, 40 seconds in the program (displayed in a HMI), it´s 47 seconds in a chronometer, it is not exact at all as I said, how can I solve this problem, can anyone help me? Thanks
-
-
File Name: HHMMSS.cxf File Submitter: ParaffinPower File Submitted: 08 Dec 2014 File Category: PLC Sample Code FB to provide a simple long timer with time remaining outputs. Time can be entered in HMS (or just mins for example). Time remaining is normalised to HMS though. Uses 2 other FBs. Create instances of HHMMSS as required. Click here to download this file
-
Hi I need to program my fatek fab Plc with the following : . I need to detect between a single long input or a repeated second pulse. The idea is to control a window blind with two outputs of the Plc and two inputs (one for up, from a up switch and another for down from the down switch). the blind should go up until I maintain the key pressed. But when I make a repeated two pulse on the key it should go up automatically during a certainly define time (enough to completely open the blind). The same for the down direction. I need help on that.
-
How to save vijeo Project on other Version of this program (lower Verion)
ShararehMirbagheri posted a topic in Modicon / Telemecanique / Schneider Electric
How to save vijeo Project on other Version of this program (lower Verion)? Any Help Appreciated. -
Download from CXD to a Omron NS15-TX01B-V2 HMI via ethernet
mayseprogramming posted a topic in CX-Designer
Hi, Is there any good documents out there on how to download to a NS15 Omron HMI from CX-Designer via Ethernet? Thanks, Andrew- 1 reply
-
- CX-Designer
- Omron HMI
-
(and 2 more)
Tagged with:
-
How to Export Vijeo Variables to an Excel Sheet?
ShararehMirbagheri posted a topic in Modicon / Telemecanique / Schneider Electric
How to Export Vijeo Variables to an Excel Sheet? Thanks -
Vijeo Designer Variable.Properties
juanleroux posted a topic in Modicon / Telemecanique / Schneider Electric
Hi All I'm tasked to create operator screens for the Magelis HMI touch panels, using Vijeo Designer(v6.2). I would like to animate an object based on information (metadata) from a variable. Typically "Variable_xyz.HiHi". How can this be achieved? I have gone through most of the help documentation but cannot find a way to retrieve metadata. Any help would be greatly appreciated. Regards Juan -
Reading Kwh on Power Meter PM800 Series using Vijeo Citect v6.0
budimanc posted a topic in Modicon / Telemecanique / Schneider Electric
Dear All, I have a little problem in reading data from Power Meter to Vijeo Citect v6.0 I'm using Schneider PM810MG for Energy reading from Power Meter and for the SCADA I'm using Vijeo Citect v6.0. I can do some simple data reading like current, voltage and the others using variable tags from Vijeo Citect with Data type INT. But i dont know how to read the data for "Real Energy In" since the data range from 0 to 9,999,999,999,999,999. Waiting for all your help soon. Thx. Best Regards, Budiman Chandra- 1 reply
-
- power meter
- scada
-
(and 2 more)
Tagged with:
-
where to download Vijeo Designer 6.0 SP1.1 pro W7 64bit?
ShararehMirbagheri posted a topic in Modicon / Telemecanique / Schneider Electric
I need to install Vijeo designer on Windows 7 - 64 bit but I can not find the link. Please advice. I have two vijeo CD , both gives me error during installation . -
Dear Mr/Ms, I using GT designer 3 to simulate have to use GX developer. But I can not install GX developer, just using GX works2. So Can I connect GX works 2 and GT designer 3 to simulate.. Please help me to slove this problem.. Thanks & best regards,