Search the Community

Showing results for tags 'timer vijeo designer'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 192 results

  1. Hi everybody, in the system information about GT Designer 3, how can i set up that The GOT writes to the PLC to notify it that their communication is active?  
  2. Recipe information Folder's

    Hi experts, i have a problem, i can't delete the Recipe information Folders's in the utility functions. Who can help me please? Many thanks in advance.  
  3. Dear forum, I am facing a trouble at the moment and hoping somebody can assist. I have one HMI software, GT Designer 3, HMI: GS2107 and/or GT2107, the software works so far so fine. The software is used on several products, I dont want to maintain two or even more software versions. Two serial devices are connect: 1x MODBUS RS-485 1x MODBUS RS-232. The data transfer is done via DDT, no direct calls. The DDT transfer the MODBUS address to the internal GD-Registers. The GD-Registers are used within the HMI. My trouble is that in some cases, there is no RS-232 device connected. This creates time outs, slows down the HMI and its just not nice looking (I have a warning implemented "WARNING NO CONNECTION TO SERIAL DEVICE RS-232". Is there a way, that I can select (retained) that the RS-232 is connected / or not? Once the software is configured "NO RS-232 CONNECTED" I can handle the rest of the software.   Anybody an idea how to do this? Many thanks.
  4. Hi experts, i have a problem, i did the upload of my software with GT Desinger 3 on the GOT, but i don't see the PLC variables because my other  software did with GX Works3 isn't linked with the uploading. Is there a way to connect both softwares to the uploading withouth a PLC?
  5. Hi everyone, is there a way to put the numerical input keyboard in a specific position when i click on the numerical input? Thanks a lot.
  6. how to set up timer in st

    Hello all I m new in st programming in omron I want to use timer in st please help me regarding this
  7. I have set up a timer in exostructure expert basic and am trying to get the contdown value from the preset of 20 to show in vijeo designer but it tells me the %tm0.v is read only and cant find the variable in Vijeo designer to show it. Does anyone know how to do this?  
  8. I am attempting to download a Vijeo designer application to a remotely situated Magelis HMI over the cloud by means of a VPN. Vijeo designer's built-in help indicates that this is possible and has provided an example.  BTW, I am using Vijeo Designer basic v1.1 & the HMI model is GXU3512.   However, I find the fields for router IP and TCP port nos. all deactivated. How to get pass this roadblock? I'll appreciate any suggestions.   Thanks a million
  9. I'm working on a program where I manipulate REAL numbers in Sysmac studio using an NX1029020 PLC. My problem is I am new to automation and I don´t know how to display those numbers when connecting to an NB HMI. I´m trying to send the data to a bar picture and a number display. My question is which AT Specification Attribute should I assign to my variables in Sysmac Studio and their corresponding Area in NB-Designer? I tried using the DM area but it didn't show numbers on the displays, only shows *****. Should I convert my real variables in Sysmac first? Or how can I keep decimal numbers and then display them? My current configuration in Sysmac: Name Data type AT Network publish ST1 REAL %D5 Publish Only ST2 REAL %D3 Publish Only My current configuration in NB-Designer Bar Picture Addr. Type D Address 3 Code type BIN Number Display Addr. Type D Address 3 Code type BIN Data type Float Integer 4 Decimal 2
  10. Hi,   I am attempting to download a Vijeo designer application to a remotely situated Magelis HMI over the cloud by means of a VPN. Vijeo designer's built-in help indicates that this is possible and has provided an example.  BTW, I am using Vijeo Designer basic v1.1 & the HMI model is GXU3512.   However, I find the fields for router IP and TCP port nos. all deactivated  
  11. Hi Experts,  In GT Designer 3 would there be a progressive number of the active window screen? For example, if I am in the window screen 5, the program retrieves in a variable the value 5. Many thanks in advance.
  12. Can You explain me how can I reset a Timer so that after completion of the cycle, it automatically starts again from 0 sec in CX Programmer? I am working on a program for a Oxygen PSA Plant. In which the valves of 2 cylindrical tanks switches at a specified interval and the cycle keeps on repeating. Thank You.
  13. Good morning experts, i have a little problem with a Alarm display (user) and i hope with your huge experience you will may help me. Thank you very much in advance  Let me explain best. I would like use a slider to control a Alarm display (user), i tried to do it, but the slider doesn't scroll up/ scroll down like i will want. It doesn't scrolling through the pages and it heighlights just some alarm. Could you give me a bit advice, please? 
  14. Hello Everyone, I am working on reports in Vijeo Citect V7.40. I want to generate a report whenever I press the button. I am able to generate it according to date like making a Cicode file and adding the form, whenever I press the button form will open to give me the option to select the date. Similarly, I am trying to make a form for a time also. Can someone guide me on how to do this? STRING sdate,edate,Em,D,M,Y;              D = DateDay(TimeCurrent());          M = DateMonth(TimeCurrent());          Y = DateYear(TimeCurrent(),1);              sdate= "Start Date";         edate= "End Date";         INT hChannel_M;                  FormNew("Select Report date..",38,2,16);         FormInput(20,0,"DD-MM-YYYY Format",Em,20);                           D = DateDay(TimeCurrent());          M = DateMonth(TimeCurrent());          Y = DateYear(TimeCurrent(),1);                   FormComboBox(2 ,0, 15, 6, sDate, 1);         FormAddList(D + "-" + M + "-" + Y);                     FormButton(8 ,1 ,"Select",0, 1);         FormButton(16 ,1 ,"Cancel",0, 2);         FormRead(0);                  STRING START_DATE_TIME         D = DateDay(StrToDate(sdate));  //DateAdd Will convert only when the date is in System Date Format          M = DateMonth(StrToDate(sdate));          Y = DateYear(StrToDate(sdate),1);         START_DATE_TIME = Y + "-" + M + "-" + D;                       STRING END_DATE_TIME             D = DateDay(DateAdd(StrToDate(sdate),86400));  //DateAdd Will convert only when the date is in System Date Format          M = DateMonth(DateAdd(StrToDate(sdate),86400));          Y = DateYear(DateAdd(StrToDate(sdate),86400),1);                  END_DATE_TIME =  Y + "-" + M + "-" + D;                                  VbCallRun(VbCallOpen("GetRep", START_DATE_TIME, END_DATE_TIME)); This is my code for date selection.
  15. I am new to automation systems and devices and I just want to know how to connect two HMI's (each one would control different things) to one PLC using Sysmac Studio and NB-Designer via Ethernet. The model of the PLC is NX1029020 and the HMI's are one NB10W-TW01B and an NB7W-TW01B. I searched for info about this topic online but I couldn't find anything that worked for me, I saw an article from OMRON where they connect two NB's to the CP series, but in my case, NB designer doesn't allow me to insert more than one HMI in the same project, I also found something similar on a youtube video that gave me an idea about how to connect multiple HMIs exporting the pks file and importing it to another HMI project but I still can´t figure out how to add both to my PLC. I would thank you a lot if you could help me with this because I know it's not a rare implementation, just I haven´t found the right way to do it. I also leave the links to the Omron article and the youtube video I found. https://www.myomron.com/index.php?action=kb&article=1554 https://www.youtube.com/watch?v=rXx5lut7G9I
  16. I have a huge confusion regarding the retentive timers on FX3GE. According to the programming manual for FX3G(image attached), all retentive timers use the EEPROM. This is very confusing to me because the retentive timers are modifying the measured time constantly in an EEPROM register and EEPROM type of memory is known to be write limited. After a couple of million write cycles the EEPROM registers burnout. I've experienced this myself by constantly using the T250 and after a while it became unusable. The timer stopped counting time after some time. This leads to my decision that retentive timers on FX3GE PLCs are something that should бе used only on rare occasions so as to avoid EEPROM memory burnout. If this is true than the real question comes in: What is an alternative for using retentive timers on FX3GE when you want to measure time between two events. The instruction TTMR for teaching timer is appropriate however this instruction does not exist on FX3G series.  
  17. GOT2000 Recipes

    Hi I'm new to GOT2000 Hmi and I have a problem about creating recipes on (GT2107). Do I need sd card or usb memory stick to save recipe or I can save it in inside memory of hmi?  Can someone told me how to do it step by step cause I only have errors when I want to save or load recipe.  Thanks in advie 
  18. Hi, Is there any way to read current status of the MES Interface connection and show it on the screen? Recently I've had a situation when MES Interface wasn't able to reach a SQL Server (there was an error in the diagnostics window), but the "Access error notification setting" bit was 0.
  19. Hello Everyone, I am writing one logic and need some help regarding that logic.   CURRENT LOGIC -  -There are two timers TON_1 and TON_2. -TON_1 timer will start as soon as PLC turns on. -After the done bit of TON_1 timer, the TON_2 timer goes on. -After the done bit of TON_2 timer, again the TON_1 timer will start. -This logic cycle will run continuously, both timers will run turn by turn. Code (Codesys/Schneider Eco Structure Machine Expert)- PROGRAM POU_1 VAR      TON_1: TON;     TON_2: TON; END_VAR TON_1(IN:=(NOT(TON_2.Q)) , PT:= T#100S); TON_2(IN:=(TON_1.Q) AND (NOT(TON_2.Q)) , PT:= T#20S);   Actual Requirement -  -There is a BOOL tag. -If the BOOL tag gets high during the TON_1 running, the logic should move to the TON_2 immediately. -If the BOOL tag does not get high during the TON_1 running, the logic should move to the TON_2 after completion of TON_1. -after the completion of TON_2, again restart TON_1. -Logic Runs continuously in a cyclic mode.   Give me your valuable idea to fulfill the logic requirement.
  20. Hi, I'm looking for help with the string exchanging between GT25 and AB CompactLogix. I'm reading recipe data from SQL via MES interface to the local devices such as GD3000. I want to move the string held in the registers GD3000-3009 (20 characters) to the string tag in the Allen Bradley. The problem is that in the scripting I cannot enter the AB Tag, because when I imported the CSV with the string tags their data type is STRING, and the scripting in GOT accepts only numerical datatypes such as WORD, etc. Has anyone found a way to handle that?
  21. "PLC No Response" NB HMI Omron

    Hello Everybody, I continued to work on project this morning but I seem to be plagued with the "PLC No Response" error. This error will only come up when I assign a PLC address to a particular object.  I have followed the steps in the post(https://forums.mrplc.com/index.php?/topic/39885-nb-designer-hmi-plc-no-response-error-solved/) to try and clear the error but am having no luck. In the screenshot I have assigned the large "Start Process" as a bit button with the write address being W50.00. When the button is pressed it should trigger a bit in the PLC but this is when the error appears. During this test I am connected to the PLC and in run mode with the PLC and HMI address assigned correctly. I have read and followed the section in the manual regarding "PLC No Response" but still no positive results.  I just want to check that there is nothing I have done at a programmer end that could cause these issues. I am happy to provide files. Thanks, Ryan  
  22. Good Afternoon, I am wanting to do two things with and ORMON PLC and HMI with CX-Programmer and NB-Designer. 1. I want to display the current time from PLC on HMI with the real time clock. 2. I want to be able to enter a time on the HMI which will be compared to the PLC time and will stop a process when when the entered time is equal to the actual PLC time.  If I can have some help with this that would be a great help. Thanks,
  23. How to use NB Data Logging

    Good Afternoon All, Just wondering if anyone would have any example code of using the Data Logging on NB designer? I am wanting to use a PID controller and display set point and process variable etc. I have looked in the manual but a coded example would be extremely helpful.    Hope you have a good weekend. Thanks
  24. CX-Designer || Get error history

    Hello ! I am an beginner automation engineer and my new task is to export all alarm/events that occured from NS5 HMIs. Is it possible to do this using the pc? I am currently using a card to get those. (using the "hidden'' HMI's menu, accessed by pressing and holding on the display).  Thank you very much!
  25. GX Works 3 Timer (TON)

    Hello, please help me deal with this problem. Mitsubishi GX Works 3. I can not understand why the TON function block does not work correctly. I need to set the timer in minutes, but if I set 55 minutes, the timer doesn't start and an error appears. How do I make a timer to avoid this? Going through the values, I found out that this happens with the numbers 55-110, although at times large numbers work adequately. t_0 - DINTflushing - TONapplyNewTime - Bit