Search the Community

Showing results for tags 'time module'.

  • Search By Tags

    Type tags separated by commas.

  • Search By Author

Content Type

Find results in...

Find results that...


Date Created

Last Updated

Filter by number of...

Found 96 results

  1. Time Based Interrupt

    kav posted a topic in Mitsubishi

    Hello guys!!! My system constist of: CPU: Q03UDE Some I/O modules Some Intelligent Modules (Q68ADI,QJ71PB92V...) A High Speed Digital Input card QX80H (setting responce time 0.1msec) 1 digital input from QX80H occupied to count the pulse that a flow meter sends. The pulse corresponds to the totalizer of the Flow meter (FCI ST100 series Thermal Mass) and it has fixed width 0.5msec. The flow meter sends 4 pulses / minutes approximately according to current flow rate. My Main Program has scan time 2.4msec. I think that PLC ignores some pulses because of the pulse width is lower than scan time of my program. Is it right? So, the PlC program calculates wrong total flow.... What can I do to avoid this issue? Attached you can find a sketch what I mean... I though to program a time based interrupt every 0.3msec. Is it right and possible in Q03UDE CPU.....? If yes, how can to do it? Thanks a lot in advance for your any help!!!
  2. Hi everyone, I would like to create a PLC code using RSlogix 5000 program in order to measure time delays on the network. Can anyone help me to do this? Thanks.
  3. Hi! I have my 1756 IF8 wired in high speed differential mode but i can't configure the RTS smaller than 11 ms. What I understand it should be possible to set as low as 5 ms if module filter setting is 1000 Hz. Is there anything else that i have to do?
  4. Hi! I just started with PLC programming. I am trying to get the time between a output signal and a input signal. The problem is that the time is ~200 ms but when i measure it with this code:   TONR(Timer1); IF PosFeedback <= PosFeedback_Min & not Timer1.Reset THEN Timer1.TimerEnable := 0; FullCloseDeltaTime[1] := Timer1.ACC; Timer1.Reset := 1; END_IF; IF (move & not Move_LastScan) THEN //Start timer Timer1.TimerEnable := 1; Timer1.Reset := 0; END_IF; Move_LastScan := move; i only get even values in intervalls of 50 ms like 150, 200 and 250 ms. I have changed the real time sample rate to 11 ms so i don't understand why i don't get a more exact result. And i can see in my trend that the time isn't exactly 150, 200 or 250 each time. I i tried and time my own click on a button and i see the problem is the timer, i only get values in an interval of 50 ms. Is there a way to make the timer more exact?
  5. Hi all,  Can someone please help me, I am using a Micro830 Controller running connected components workbench software to program the controller. I want the use the Real Time Clock of the controller to control an output to turn on everyday at 01:30am and turn of when it receives a signal from an input. The output will control a backwash valve that will operate and activate a cam switch internally that sends a signal back to the Controller to say the valve has operated and can now stop sending the signal to the valve. (if that makes sense). I have tried playing around with the RTC instructions but I cannot seem to get it to operate how I want it to. Any help would be much appreciated. EnvrioService
  6. Hi 1- How can I identify a disable x20 module (in physical view) cyclically ? I am looking for a funation block who can do that because I want to use the 'Module Ok' status of x20 module to check if their presence. Problem is 'module Ok' status is the same for module missing or disable. 2- Could I disable a module using fonction block? (FYI I already know the right click in physical view). Thanks  

  7. module diagnostic

    Nurlan_B posted a topic in Mitsubishi

    Hi. I have Q12HCPU and Q358 Base unit. How to read from CPU which module removed from base unit when PLC is runing ? Which address storing diagnostic information?

  8. Rajan

    Rajan posted a topic in CX-Programmer

    Hello Experts  I am facing problem with CJ Series Analog I/O module MAD32. The Run LED is Lit, ERC Led is also Lit. what could be the reason?
  9. Dear Experts!!!   Could you please provide me the sample of "QD75MS Module & MR-J3-B program with functional block"    As you can see the page no. 3  in the attached document  "KI-Doc_QD77MSXX_MR-J3-XXBS.Zip" sample is there but i am not able to find it anywhere.   Or if you have any otherone please share it.   Please help!!! KIdoc_QD77servo_English_20130131.pdf

  10. Reading position data from GOT

    quoroy posted a topic in Mitsubishi

      In this first picture is a numerical input with a monitor device D2058. In the whole GOT project this is the only device that saves the information inputed.   Then on que PLC sequence theres an instruction moving that device's value gotten from the GOT to the position module's buffer memory. My doubt comes when there's another device D10022Z9 getting the same value of D2058. In this case the Z9 index is always 0, I checked. In the whole PLC program this is the only part where the D10022Z9 appears, there is no instruction anywhere copying D2058 to D10022Z9 which is how I would think is the way it has the same data always. Am I missing something or how is this possible?  
  11. PAROCK1 for HMI/SCADA View File Now a software solution is available for your Modbus (MB) needs in Rockwell/Allen-Bradley Control Logix or Compact Logix (Clgx) family processors, instead of a traditional 3rd party hardware like Prosoft MVI-56, Molex SST-SR4-CLX-RLL etc.  It is an Add-on instruction (AOI) for PLC/PAC firmware v16 or later, (other solutions are available for pre v16 systems).  For hardware interface, use PLC’s channel 0 (serial) or TCP/IP Interface module(s) to have as many MB TCP/IP devices or serial devices.  (Some limits apply based on system configurations, Comm. settings depending on HW used.) Connect any MB Client/Master or Server/Slave device(s) to your CLgx PLC, including flow computers, analyzers, VFDs, Power Monitors, Level gauges, Smart I/O, etc.  All the MB public/native function codes are supported.  32-Bit integers/floats as single entity are supported with byte and word level swapping. A separate utility automates the data mapping to your PLC logic.  Features -Serial Master (BASIC required Option); TCP; Slave; Redundancy; More than 5000 accumulative registers; MB CFC (Custom/Private Function Code) Support; Data mapping too – Between PAROCK1 & your PLC logic; Packaged with Rockwell; TCP/IP Interface Module; Volume Discounts; Annual Support Requirements -Rockwell/AB-CLgx processor with v16 or later.  Contact PCI for earlier versions. -If using CPU’s Chan0, you cannot use Chan0 for any other user mode activity. You can use it for non-user mode activities -TCP/IP Interface Modules from Rockwell/AB supported, are: -1756-EN2xx ControlLogix® Ethernet/IP communication modules, firmware revision 5.007 or later -1756-EWEB ControlLogix Ethernet/IP web server module, firmware revision 4.006 or later -1768-EWEB CompactLogix Ethernet/IP web server module, firmware revision 1.002 or later -1769-L30ER, 1769-L30ERM, 1769-L30ER-NSE, 1769-L33ER, 1769-L33ERM, and 1769-L36ERM CompactLogix controllers, firmware revision 20.011 or later -1769-L24ER-QB1B, 1769-L24ER-QBFC1B, 1769-L27ERM-QBFC1B CompactLogix controllers, firmware revision 20.011 or later -1769-L16ER, 1769-L18ER, 1769-L18ERM CompactLogix controllers, firmware revision 20.011 or later Other Related Services/Items -Custom PLC Add-on instructions building -PLC upgrades, troubleshooting, applications -PC Windows, iOS5, Linux, Mobile devices Comm. Drivers -Custom development, Technology Transfer Services  -Other Non-AB communication drivers for serial or TCP  -Full control system integration, training, architecture design This driver can be conviniently used with Visual Studio in development of complete large scale complex HMI/SCADA Systems. It can be used to perform advanced reporting MES, analytics, IoT, Big data type apps. One example is available to download here For More Info Overview of Parijat Drivers: Click here  Additional supporting Info about Parijat Drivers:Click here Complete Related Driver options: Click here     Submitter Scadadoctor Submitted 03/10/16 Category Other PLC Demo Software
  12. Hello all, I was asked to check if there is a PID real - time software which automatically calculates PID loops parameters and update the PLC registers or HMI ( by OPC server etc.) when the process is working and "breathing". REAL-TIME. Not PID simulator or PID tuner based on measured data, but a software that will calculate and update the PID parameters in real time while maintaning several PID loops simultaneously. Are there any suggestions? Thank you, Olesia
  13.   Dear, I need some help with an application in ml1500 with the RTC . I need an exit is enabled by days of the week . I´m programming in Rslogix500. Program follows the image. If possible help me. Thanks Daniel.
  14. Hi all, Quick question about adding ENET modules to a plc. If I have a local network of a HMI, PLC and 1 device all on IP 192.168.255.x and I have another device across the plant with an address of 171.27.19.x, can I add that one device to the PLC and it will recognize it? Is there a way to add a device with a totally different IP address to a PLC that is already set up?
  15. Good day, I´m helping with small project and currently i am stuck because of this problem. And I hope you can help me out. I´m using PowerFlex 525 connected with AB CompactLogix 1769-33ER PLC via EtherNet/IP. Connection is working, I can read and write values from/to 525. To configure both devices i´m using RSLogix 5000. 1) First problem occurs after I loaded configuration to 525 and it´s, that 525 keeps overwriting values of Accel and Decel Time 1. It happens when i directly change parameters in Module Properties (online) or after I upload configuration to device. It happens even if i set parameters directly to 525 with its HMI panel. - I kinda get around this problem when i use Accel/Decel Time 2 for Step logic, but if i send direct reference value motor still jump to it and that is not good, especially when changing direction of rotation. 2) Second problem is that I cant get Speed Sources and Start References right. Usually Is working only option 1 and others are not, or they are doing something else that they should. For better imagination this is what i want to do: I have 3-state switch (left = 1 ON(DigIn TrmBlk 02), 2 OFF; center = 1 OFF, 2 OFF; right = 1 OFF, 2 ON(DigIn TrmBlk 03)), In center position I want to control 525 with EtherNet (already working when: Start 1 AND Speed 1 = EtherNet/IP). In left position I want to control motor directly with Drive Pot and In left position a want to start Step Logic (which i have already set) - Funny thing, If I set Start 1 = Ethernet, Speed 1 = Step, Start 2,3 = DigIn, Speed 2,3 = Drive Pot then in all three position motor goes in Step logic.. Or when i get left and right position working then Ethernet is blocked.. and this kind of things.. I Attach print-screen of my current settings, if you need something more just, tell me. Thank you for your time, and I hope someone will be able to help me.

  16. Programming Error using QJ71C24N

    Husanto posted a topic in Mitsubishi

    Hi All, I have problem about programming serial module Mitsubishi PLC using QJ71C24N. If I unconnect the cable from the module and connect again it show SIO error and the communication become lost or not sending data again. so i have to restart the PLC to make it normal again. Any other solution for solve this error without restart the PLC? Thanks Husanto
  17. Can any one help? I am trying to write logic to collect data off a Control Logic controler using V.20.03 Logix5000 software. Attached is a copy of Time and Date logic. I there an easier way?
  18. Hello all, I am experiencing an unusual (and what appears to be an unheard of) behavior in my CompactLogix L18ER controller. I am setting the date/time of the controller from my work station, however when I GSV WallClockTime, it is reporting 4 hours different. I have asked our local resources as well as done some forum and knowledgebase searching without result. Has anyone encountered this before? Attached is a screenshot of the controller time vs. the wall clock time. This isn't mission critical since it can be manually adjusted however I would like to understand what is taking place that would cause this behavior. Thanks!

  19. SECOND function to convert time

    Jurgen posted a topic in Mitsubishi

    Hello, I'm trying to convert time into seconds using the SECOND function. I use Word(signed) array 0..2 but get an error message saying "wrong input data type". What data type do I need? Thank you, Jurgen
  20. Dear all, I need some help with programming time in concept 2.6 in FBD. I use momentum PLC 171 CCC 980 30-IEC I would like to program 24Hours Clock with day, week and year. Can someone help me with this please. Regards Sam
  21. Hey guys. New to the forum and new to plcs. I am running into problems quick, fast and in a hurry. Please be patient. I have created a new project. I have added module 1756 ENBT because that is what I will be connected to. On the chassis there is another ether net card which runs to a switch. That switch runs to a 1734 aent card. I have added this module, 1734 aent, as well to my project. Now I must add a 1734 IB8S and a 1734 OB8S. These are not appearing in my list. I proceeded to download and install these add on profiles. After installation, however, I can still not select the I/O modules. Why is that? And how do I fix it? Thanks in advance, HotPie