Search the Community

Showing results for tags 'the program in controller'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 87 results

  1. TCP_IP_connection

    I. Developed new application   TCP_IP_Connection 1. App TCP_IP_Connection     applies the technology of IoT, Smart Home, Remote control.    It allows to carry out: - remote control and monitoring of control systems; - remote diagnostics of  the object; - turn on/off sensors and devices, including electrical circuits,   hydraulics, pneumatics, etc.; - transfer  information, files and images between smartphones and computers   implemented the application. For communication between the respective devices (smartphones or computers) are required only stable connection to the Internet  !!! The application is developed according to the technology MQTT and use free  Internet broker. As a broker use the HiveMQ broker. The application consists of   3 parts : - TCP_IP_connection.apk - works on the smartphone and is intended for control and      monitoring of equipments; - Server_Send_Receive.exe - the management server located  on the computer and   execution  action on the transfer of  information from the smartphone to the   controller and   back; - Server_controller.exe - located on the  same computer and execution tasks   of  controller. Communication is linked directly with the controller via Ethernet or     Ethernet/IP. As the controller for management purposesused controller family   OMRON (CS1,CJ1,CJ2,CP1H,CP1L...). Note. As a controller you can use the other type of controllers, for example, Yaskawa, Siemens, ABB and  other. They require rework program Server_controller.exe only to  interface of exchange with controller. So for Yaskawa controller family 2300Siec this interface already developed and used in industrial conditions. 2. The application includes the following controls: A. Smartphone – computer - controller. - modes  read/write of memory cells and  bits of the controller OMRON      (DM,W,EM,CIO,HR); - continuous cyclic polling of the memory areas; - the formation of Alarms in the event of errors of control system; - Display Gauges for 6 variables in real time; - Display Scopes for 6 variables in real time; - formation of statistical data on the operation of the equipment. B. Smartphone - computer. - sending  and receiving text  messages; - sending and receiving  picture image; - transfer photos from a smartphone;  - transfer images from built-in Web camera of the laptop; - reading the contents of a directory on the computer or laptop; - reading contents of a text file. С. Smartphone -smartphone / computer - computer. - sending and receiving text messages; - sending and receiving of picture image; - transfer photos from smartphone to smartphone (from computer to computer); - send the image with the built in webcam of a laptop to another laptop; - reading the contents of a directory on the computer or laptop; - reading contents of a text file. 3. Work application Server_Send_Receive.exe and Server_Controller.exe tested on computers running the Windows 7 operating system. Work application TCP_IP_Connection.apk was tested on smartphones Samsung, Phillips  running the operating system Android 5.0, Android 6.0. It requires the use of a smartphone with a display diagonal of 5 inches and more. 4. App TCP_IP_Connection.the apk  paid, the cost per user is $ 5 USA. Distributed through Google Play. The Internet address for downloading of  programs Server_Send_Receive.exe and Server_Controller.exe is on screen Help  application TCP_IP_Connection.apk.  OMRON_Communication has the manual in Russian and  English languages. The Internet address for downloading the full manual   https://yadi.sk/i/F_EJOQEd3G5sXc. Looking for partners for the execution of similar works.      
  2. Version BA KR C4 NA UL V2

    18 downloads

    KUKA: KRC4 NA UL Operating Instructions
  3. KUKA: KRC4 NA UL Operating Instructions View File KUKA: KRC4 NA UL Operating Instructions Submitter panic mode Submitted 02/16/17 Category Robots and Servos
  4. hi.  i want to make some program that work with indirect adress. example, i make program with many much type. I make with Got-1000 mitsubishi.   can you bring me some example? i am sorry, my english is Bad
  5. Rslogix 5000

    I am unable to read FBD program in RSlogix 5000.It says editor not downloaded.I m able to see ladder logic programs.
  6. Micrologix 1000

    Im having some trouble with a PLC and looking for a some help. Whats happening is output number 3 is stuck on. I thought maybe it was just the PLC. I pulled the program tried it on a new PLC with no luck. I checked for faults and the handheld shows no major faults. The output that is stuck on is for a door, its telling it that the door is open. Any help would be great.
  7. Hello guys, I sell cheaply Omron SYSMAC Programmable Controller - CJ1M-CPU12, CJ1W-PA202, CJ1W-ID232, CJ1W-ID211, CJ1W-OD232, CJ1W-AD081-V1, CJ1W-NC113, CJ1W-TER01, + cables: CS1W-CIF31 and CS1W-CN626 - Actual price is 290$ - more info+photos - > here < details: CPU:  CJ1M-CPU12 (ver 3.0) Small! Fast! Flexible! These machine controllers provide flexible control for all kinds of applications.  Compact 90 × 65 mm (H × D) dimensions are first class in the industry. Provides excellent high-speed control performance, with high-speed processing of 0.1 μs for LD instructions and 13.3 μs for floating-point calculations.     PSU: CJ1W-PA202 Used to provide power to CJ1M CPUs and I/O units; AC and DC supply versions available; Clips to the left of the CPU; Also used to power expansion I/O assembly Note: The output currents stated are maximum figures. The combined 5Vdc and 24Vdc outputs must not exceed the maximum output power.   Basic I/O Units: CJ1W-ID232 CJ1W-ID211(SL) (ID211 without terminal block) A wide range of CJ series input units are available featuring high-speed input and suitability for various applications.   CJ1W-OD232 A Wide Range of Basic Output. Units for High Speed Output and Different Applications. These Output Units receive the results of output instructions from the CPU Unit and perform ON/OFF control for external devices.   Special I/O Units: CJ1W-NC113 Axis position control unit. Open-collector output. Point-to-point positioning controller withpulse train output.   CJ1W-AD081-V1(SL) Analog Input Module to convert varying input signals     OTHERS: CJ1W-TER01 End Cover CJ1W-TER01 (necessary to be mounted at the right end of CPU Rack)     Cables:   CS1W-CIF31 ↓ (length - 0,5m; used)   CS1W-CN626 ↓ (length - 6m; used)         Current status of each part: About a year used in a clean environment. Our creation of PLC Programmes have been deleted - PLC is ready for your creation. All parts have been tested and are fully functional. Personally, I guarantee the operation of all components. A part of this purchase is a PLC / USB cable (CS1W-CIF31; CS1W-CN626), allowing you yourself will be able to check the status of functionality. A part of the sale is not subject documentation neither software. (CX-Programmer can be obtain from the Internet.) Sale due to dissolution of company.               Product Description OMRON + Web links to specifications   CJ1M-CPU12 (ver 3.0) Compact 90 × 65 mm (H × D) dimensions are first class in the industry. Provides excellent high-speed control performance, with high-speed processing of 0.1 μs for LD instructions and 13.3 μs for floating-point calculations. Other models are available with special functions such as the CJ1M-CPU2[], which provides positioning functions and built-in I/O, and the CJ1G-CPU4[]P. High-capacity Memory Cards up to 128 MB can be installed, and used to backup the program and system settings, or log customer data. The large instruction set can support diverse applications. Four types of programming are supported (ladder, structured text, sequential function charts, and instruction lists), with approximately 400 instructions and 800 instruction variations. These CJ-series CPU Units support structured programming using function blocks, which can improve the customer's program development resources. The various protection functions provide improved security to protect valuable software resources and property. The CPU Units are compatible with the CX-One Integrated Tool Package. Information for each component can be linked, and the system's data can be integrated into one database. The software can provide total support from PLC settings to network startup.   Specification: > here < Datasheet: > here <     CJ1W-PA202 Omron CJ1M CPU's, PSU's and Expansion Control/Interface Modules The CJ1M is a powerful and compact PLC family, covering applications requiring up to 640 I/O. CPU models are available with built in pulse outputs for stepper or servo control, and all CPUs in the CJ1M family enjoy optional modules for many types of I/O and communications. The CJ1M is the next generation of PLC from the earlier CQM1 series, and program compatibility eases migration between them.As with other Omron PLCs, the CJ1M series is programmed with CX-Programmer (RS stock no. 400-6440), designed for compliance with IEC61131-3. The backplane-less construction of the CJ1M series makes selection and installation simple; choose the CPU and power supply unit, then the I/O modules to suit the application. These items are simply plugged together end to end and then mounted on DIN rail.   Specification:  > here <   CJ1W-ID232 CJ1W-ID211(SL) (ID211 without terminal block) High-speed input models are available, meeting versatile applications. ON Response Time: 15μs, OFF Response Time: 90μs Use 24-VDC, 100-VAC, and 200-VAC models to connect to devices with different types of outputs. The 24-VDC models can be connected to devices with either NPN or PNP outputs. There is no need to select the polarity. A digital filter in the Unit can be set from 0 to 32 ms to reduce the influence of external noise. Either a Fujitsu or MIL connector interface can be used. *2 Several models of Terminal Block Conversion Units are available, making it easy to connect to external devices. Specification:  > here <   CJ1W-OD232 High-speed output models are available, meeting versatile applications. ON Response Time: 15μs, OFF Response Time: 80μs Output Units are available with any of three output types: relay contact outputs, triac outputs, or transistor outputs. For transistor outputs, select from sinking outputs or sourcing outputs. Output Units with load short-circuit protection are also available. *1 Select the best interface for each application: Fujitsu connectors or MIL connectors. A wide variety of Connector-Terminal Block Conversion Units are available to allow you to easily wire external output devices. Unit have load short-circuit protection.   Specification: > here <   CJ1W-AD081-V1(SL) • Wire burnout detection • Peak-hold function • Mean function • Offset gain setting Use the Analog Input Module to convert varying input signals, such as 1 to 5 V or 4 to 20 mA, to binary values between 0000 and 1F40 Hex and store the results in the allocated memory at each cycle. The ladder diagram can be used to transfer the data to the DM Area, or the SCALING instructions can be used to scale the data to the desired range.   Note: Analog Input Terminals are also available as DeviceNet Slaves and as Multiple I/O Terminals. You will find further information on these in the Industrial Networking and   Specification: > here <   CJ1W-NC113 These position control units support positioning control via pulse-train outputs. Positioning is performed using trapezoid al orS-curve acceleration and deceleration. Models are available with 1, 2, or 4 axes control, and can be used in combination withservo drives or stepping motors what accept pulse-train control.   Specification: > here <         Payment Method 1.     I accept PayPal only. We ship within 3 business days of receiving payment. 2.     Serious bidders only, please. Orders will be cancelled and an unpaid item dispute filed if payment is not received within 16 days of purchase. Therefore, please make sure it is you need before buy the product.   Shipping 1.     Free Shipping 2.     Method : EMS or FedEx. 3.     Winning Bidder can receive the item in 2 days or 1 week from receipt of payment.  
  8. Beckhoff PLC Counter

    Hi everyone, I need some help with my PLC programming. I am currently using a twincat 2 software and a Beckhoff CX 8090. Basically, the gist of my program is to send and receive data and datalog the input data received from the sensors and timestamp the received data for every 1 second. I want to create a boot up counter where it will count the number of times my data logging program has restarted(if it did). This boot up counter serves as a health monitoring check to ensure that my program is running perfectly and thus, not restarting randomly when it shouldn't. I am more familiar with structured text so if you have a solution, kindly post it in structured text form. Your help would be greatly appreciated. Best regards, DeadPool
  9. ST program step count

    Hello everyone. I can't find my ST program step count in GX WORKS 2. Does anybody knows where is program step count in GX WORKS2 ?
  10. Brian B

    I need help with a program I wrote for school that didn't work quite right.  I have to make a chasing light program that will freeze the lights when a PB is engaged and reverse when PB is engaged on light 1.  The assignment has already been turned in but our instructor ( if you want to call him that) has told us a similar sequence will be on the final.  Can anyone help me out??
  11. ICP DAS New PLC

    The ICP DAS WP-9421-CE7 has just been released. It is a compact (3U), rugged PAC that provides AM3354 ARM CPU, dual Gigabit Ethernet, two USB ports, VGA ports, SD card slot and redundant power input. Learn more: http://www.icpdas-usa.com/wp_9421_ce7.html?r=dora  
  12. Dear Experts!!!   Could you please provide me the sample of "QD75MS Module & MR-J3-B program with functional block"    As you can see the page no. 3  in the attached document  "KI-Doc_QD77MSXX_MR-J3-XXBS.Zip" sample is there but i am not able to find it anywhere.   Or if you have any otherone please share it.   Please help!!! KIdoc_QD77servo_English_20130131.pdf
  13. Program not comparing

    Dear Sir, I need to update the PLC program offline with online, so I tried to compare the program blocks but I got the error that The comparison of the two blocks in STL showed that codes are identical. But still when I want to go online it is giving error that codes are different. Can anybody help us in this? New Microsoft Excel Worksheet (2).xlsx
  14. PLC-2 controller

    I am a new AB. I have machine with PLC-2. I dont have software tool to open project, only backup PLC. Anybody help me printout attached project. The best regards Jaca APV Douglas.zip
  15. CQM1H-CPU51 Download Program

    hello...... i use of C200HS-CN220-EU Program Download Cable for downloading program to plc. i can work online but when transfer to plc error is check dip switch.... i read manual and dip switch table but cant set dip switch..... please help me to setting dip-switchs for C200HS-CN220-EU Program Download Cable...
  16. How to resolve my plc is stop working after download program from H1U-XP with autoshop v2. It show download plc program process but i don't have any program in ladder chart. Pls help...
  17. FX5U

    Halo, i have question and asking for help. my factory use mitsubishi plc type fx5u. can anyone help me how to setting everything that make motor servo can run. PLC : FX5U Ampli Servo : MR-J4-70A Thank you for helping me.
  18. Verify program

    Hello, I have a question concerning the verified program. I do not know if the program is verified or not. I can not upload pic. I have 8 programs Verify result MATCH and one green line Data (Verify destination):NOT TO USE Verify result: Dest. Only. The green line is confusing me. I ask for an explanation. Please. Greetings to all
  19. I have a problem when trying to download a program from a FX1S-30MT PLC. I am using a SC-09 USB cable. The software i am using is GX Developer 8. When trying to download the MAIN program the screen in the attachment appears. I tested the download from another PLC of same model and have no problems, therefore the cable is ok, and the laptop is ok. When downloading of the parameters and comments does not give error, just when trying to download MAIN. Also I tested connection with Test Connection button and says communication is ok. Anyone who can help? I have a doubt, how can i see the communication parameters on the PLC side? Thanks a lot
  20. Help about converting program

    Hello, First of all, Hello to all members. Im From Portugal. I trying to help my dad. I Have a Omron CJ1M-CPU11 with a program running that works fine... Now i need to transfer this program to a CJ1M-CPU13. I started to download from CJ1M-CPU11 to a file... them im running the Cx-programer on the CJ1M-CPU13, connection its ok, but when i try to transfer i get this error : The connect PLC type : CJ1M-CPU11 The Project PLC type : CJ1M-CPU13 Its possible to convert ? Please Help. Please view in attached file. Thanks
  21. Hello: I'm not sure how to go about creating the structure of this program, would like some ideas/help. I have a program that checks/reads 8 analog inputs and compares each input against 4 different settings, if the value is outside any of these settings the program runs a subroutine to send out an email for (Alarm/Event) notification for that particular input. The way the program is structured now is that it reads analog input 0 first and checks against the settings if the reading is not in range it will call a subroutine to send out email for that sensor(analog AI:0.0) then it will return and read for Analog input #1 and check reading and if it needs to it will call another subroutine to send out email for that sensor(analog AI:0.1) and so forth. What I need to add, is a way to count how many times a sensor(input) has sent the alarm email because I want to limit this to 5 notifications after that, stop sending emails. Now this has to be done for each sensor(input).(Note: I would also like to have a timer involved so that it will only send emails about every 15 minutes for 5 counts.) I need this because the plc will send out emails until the error for the sensor has been corrected, this could take a few hours and if I don't have some sort of control, that would result in 1000's of emails being sent and world probably get shut down for spamming. Would like some ideas on how I should go about this. I am using a micrologix 1100 and rslogix 500 software. Thanks
  22. Program Loop

    Do I need to write the "Program Loop" into the ladder or will the complete program start over once it has hit the "END RUNG"??? Micrologix 1100, programming with the RSLogix500. Thanks
  23. I am writing a new program for a MicroLogix 1500 LRP Series C. When I verify the project I get the following errors: Program error ERROR: Attempted to set more IO data than has been allocated Program error ERROR: Incorrect Output Force File Size The IO Configuration should be correct because I had the software "Read IO Config". I don't see any unverified rungs. My software is RSLogix 500 Version 9.00.00 (CPR 9) Does anyone have a solution?
  24. Hello Everyone, I am new to ladder logic, and trying to understand flow of below attached ladder logic- How does the program flow ? Does PT4601_I in rung 3 waits for rung 2 to complete inorder to consider updated value of PT4601_I or it consider PT4601_I default value and runs simultaneously with rung 2 ? Thank you in advacne