Search the Community

Showing results for tags 'tag data link error'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 294 results

  1. Hallo. Im hoping someone can shed some light on these topics. The company im working for have been using gx developer iec 7.04 for ages. The setup we have been using is QxUDE plc with beijer HMI and FR-E700 inverters on profibus. Recently(finally) we have been forced to start using gx works 2 because of newer plcs. With new software come new questions as always. And since im feeling we have been hanging in old software for too long. I want to make sure we are up to date this time. The setup we plan on using is QxUDV cpu, CC-link ie (QJ71GF11-T2), FR-A800 inverters and GOT 2000 for HMI I have made a few project in siemens and TIA portal. And software wise it has always annoyed me, that mitsubishi lacked the same integrated software package as siemens. This made me discover navigator. With system labels navigator makes the variable control, hardware setup and project overview im missing from siemens possible. My question to navigator is. Does people use this? i dont see much about it on the forum? is it already outdated? Gx works 2 or 3 Again i cant figure out what is new and what is old. What are the pros and con for choosing either? CC-link ie or CC-link From internet reading. I find that IE is the newest and faster CC-link version? Is the classic CC-link on the way out? If not why should i choose IE over classic? When setting up CC-link IE in navigator i dont get the same hardware in the catalog as CC-link. To setup inverters i need to user general intelligent device station. Whereas in cc-link i can choose FR-inverters. Is this the way it works? or can hardware catalogs be updated somehow? Blocks for FR-A800 Maybe its just me. but i really think the search function on the mitsubishi download page is crap. When i filter QPLC i get LPLC etc. ive been trying to find some blocks to control inverters without luck. Do i start creating it myself or can you point me in the right direction? I know these are a lot of mixes questions. But i feel we have been non-efficient for years because of bad software choices. Hope someone can shed some light one these points.
  2. So a little new to PLC's especially Omron PLC. I have this machine from Japan that uses Omron CP1L which needed some modification. I made the modifications and uploaded it on to the PLC. When I try to put it in "run" mode it gives me the "Failed to change the operating mode the operation mode may be still changing in the PLC" error. After that the machine does not move even with the orginial plc logic. At first I thought it was my logic and so I double checked and did it again. Same thing occured. Has anyone experienced anything like this? How can I fix the PLC? Thanks
  3. Help plz cqm1h cpu 51

    I have upload a program from the cqm1h cpu51 by cx programer But when tried to combile it there is an error @7seg what dose that mean I tried to upload it with syswin . At the begining its ok bu at 22%   error. Program block error step 0001 What can i do for this It is a huge program And i need to add some new steps Pleas help me
  4. Hello everyone, I am working with a NB10W HMI connected to a PLC NJ by Ethernet protocol, I would like to know where to start regarding the sending of data from the PLC to the HMI. I have a 50x15 array and should show all those values in the HMI for read / write. How to proceed? I started working with PLC for a while. I'm using Sysmac Studio to programm the PLC and NB designer to the HMI.
  5. Hello everyone, I need the help to do setting of datalink between CJ2 and LOGIX-5324ER. The Allen bradley PLC was programmed by contractor and I have no software of it, so I am doing the network setting in CX-one network configurator. I tried to do the instruction in the Quick Start Guides on Downloads section here under Omron, but I couldn't find the option to register tags in network configurator. Is there anything wrong here? or is it possibly because of that they not support to do a datalink in these version of PLCs? They appeared like these in the pictures.
  6. The production environment has had a CX Supervisor package running since 2006. the internal computer finally bit the dust... We have managed to install XP on another PC. Supposedly it was all installed correctly off site and tested to run OK offsite. When connected to the (PLC) machine CX-Supervisor [v1.33] gives an error 1007. Probably its an communication error. It seems that the back-up runtime version (sr2) was CX Supervisor v.2.1 from which we don't have a hash dongle. We only have a v1.3 version.   According to the omron helpdesk, the only thing we can do to test the connections , is to install a v2.x trial version with the .sr2 file. There is no need for a usb-dongle in a trial version and it wil only work for 30 days. That would be sufficient for us, because the repair of the build-in system will take about two weeks. For now a complete production-line is out! In short: We urgently are in need of CX-Supervisor v2.x trial installation package. If anyone knows where to find it, it will be appreciated. 
  7. CAM Control Data

    Hi everyone, I'm trying to use the cam control data by using an MR-J4-A-RJ and MR Configurator 2. When I switch the input "CAMC" to ON, I see that the output "CAMS" is switched to ON which means that the cam mode is activated. When I switch CI0 to ON to choose the Cam Data No.1 and switch ST1 to ON...nothing is happening like if there is no Cam Data. Please, have you any issue or idea ?? Thank you in advance Omar
  8. CX-supervisor

    I want to send data from internet to cx-supervisor via cx-supervisor website but error. i don't know how to resolve this problem .I attach photo below, people help me with
  9. hi guys, i want to ask about cx supervisor development 3.0. i have problem with my cx supervisor. my cx-supervisor cant run, but can built succesfully. my cx supervisor 3.0 development version, my cx supervisor problem like this. do you have solution ?thx for attention,sorry for bad english best regards
  10. Hello. There is a controller FX5U-32MP in the presence, the inscription "CC-Link IE Field Basic" and the Inverter (FR-A840-00170-E2-60) near the connector, the inscription "CC-Link IE Field Basic" on the front panel. I set up both devices according to the instructions. It turns out to read the state of the inverter (state, frequency). And I can not manage from the controller. Already all the settings that could have changed. Can you scribble what is wrong? p.s. Sorry for the bad english.
  11. CQM1 fatal error reset

    I have a fabric handling system using a CQM1-CPU21. When I started it , I got  error # 0x00F1. Also associated with it  are bits flagged AR1615 and AR1415. I have the programming code on a PC. I tried an error reset and now I have a stack of NOPs. I am not seeing the IO table using CX-programmer. Thank you.    
  12. Hi, I am working on a project in Digi Module ConnectME9210 and sending data to Allen Bradley PLC (CompactLogix 5370 family). I am not sure which endian I should use to send data. Does Allen Bradley receive Data in Big Endian or Little Endian? I have another question as well. Can I make an EDS file to tell the PLC to receive data in UINT16, not as a single byte? Muhammad Azeem
  13. How to allocate memory in rcpu to link datas of FXcpu . through CC link configuration
  14. mrj4

    hi all, anyone can hep..i use servo mr j4.. now got error 121..anything can help..i read from manual error code but cannot understand..
  15. Hello all  i'm looking for some software to record a 100 plus channels maybe with an ascii string from a PLC? i want to be able to assign each channel with a unit and a range, flagging feature would be nice.  - selecting the channels i want to view  - auto start recording - save file and start new automatically  -view and create reports  preferably no additional hardware because of the amount of channels. this is to record an operators every move so in events of damage or plant failure we can quickly identify the problem (point the finger)  many thanks dan
  16. Hello all, i'm looking at installing a completely new network for our PLC system, using a ring topology. at the same time i would like to incorporate the IP cameras and VOIP into the same network.  each system is on a different sub net, PLC = x.x.1.x, Cameras= x.x.2.x, VOIP= x.x.3.x estimated camera traffic will be 25 Mbps, PLC 10 Mbps, VOIP no more than 1 Mbps  switches would be capable of 100 Mbps  question: managed or un-managed switches? if it is possible to use un-managed without affecting operations then this would be a massive cost saving    please only comment if you have practical experience implementing this  many thanks Dan  
  17. hey, I'm making a program with vijeo designer with a HMIGTO5310 and with somachine basic and a TM221C16R. At the moment i don't have my TM221C16R yet but i'm able to run the program in simulation on my pc and connecting the hmi to it. I'm able to control everything on my hmi but the moment i'm trying to activate the webgate, vijeo refuses to download the program to my HMI end gives the error " error 1850: [target] [target1] secondary drive full or not found. check the data file location setting.". Is this because it isn't connected to a real PLc but a simulation of it or is it because something else?
  18. CJ1M-CPU12 Host Link Protocol(FINS)

    Hi all,I tried connect to CJ1M-CPU12 with Host Link Protocol from PC.I sended(without spaces)  "@00FA F 00000000 0101 82 0038 0A +FCS *Cr" through peripheral port for read Dm area.But PLC didn't answer.I tried again with 19200 7E2,9600 7E2,115200 8E1.But  result is same no answer.DIP switches on the PLC are are ON all of them.I read W342-E1-14 CS_CJ_CP+HostLink FINS ReferenceManual.But I didn't solve this problem.Finally hooked Rs232 Port and sended same code with 19200 7E2.PLC sended to me "@00???".Is peripheral port settings wrong?If it is not what's wrong? Thank you 
  19. Rx3i to Balluff IO Master

    Wanting to write to Balluff Smart Lights via IO Link Master IP #BNI EIP-502-105-Z015.  I can find lots of literature on setting up the communication via E/IP in RSLogix 5000 but haven't located anything with Machine edition for writing the data over IP.  I am utilizing an Rx3i platform with IC695CPU315 and IC695ETM001 for network access
  20. I'm trying to import .gsd files but an error occurs and says : "IntegrationManager: 'xddRootDirectory'-parameter is no valid/exisiting directory !" The second error that shows is : "Path information incorrect: The string C:\users\name.surname\Desktop\GSD\s0100008.gsd is not a valid path." Has anyone encountered this problem and maybe found a solution to it?
  21. Hello I downloaded a .mer file on the Panel view 1000 but it shows errors on the display graphics. i have configured the Rslinx communication several times by selecting the rigt PLC in Design and Runtime mode. I am using Facotry Talk view 8.20 and creating 5.10 runtime file. Please advice. I was able to correctly download and use the HMI on a similar machine. I dont know what am I missing on this one.    Thanks Pratik Jain
  22. NB7W System Error

    I’m programming a OMRON NB7W-TW01B with NBDesigner and after I download to the HMI updates I made to the program, when the HMI initializes it shows “[0] System Error” for a while and then it disappears, not showing again until the next reboot.   The manual only says it is an HMI internal error and nothing more, leaving me clueless about what I can do to fix this issue… I already have updated the kernel and rootfs of the HMI, nothing changed.   What do you guys think the issue is, what should I check to try to fix this problem?   Thank you very much for the help.
  23. Hello, I'm looking for a simple data logging software, something that doesn't require any programming skills. Thank you!
  24. I have Omron CP1H PLC and using Ethernet Option board to communicate through Ethernet. When I connect PLC to 2 Computer it starts malfunctioning and values in register get fluctuate. while I connect single HMI it works fine. Kindly give solution if anyone know.