Search the Community

Showing results for tags 'sysmac studio proces'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 164 results

  1. I don't suppose there is anyway to modify the popup Alarm Notification?  I know you can press the Acknowledge and get it to clear...most of the time, but it always seems to be right in the way when it does pop up.  I can move visual data to a different part of the screen that I want to see when an Alarm appears, but I'd rather be able to move the Alarm Popup or Resize it all together....   Thanks,
  2. I am trying to use the "Scroll_composition_all" IAG that I found browsing the Omron Software section...…  What am  supposed to put in "AlarmObjName" in Properies of my NA5 (using Sysmac Studio)?? I figured it was just a set of buttons that would control the selection bar on my Alarms Display.... Thanks,
  3. Has anyone had experience with EtherCAT Communications using Sysmac, NJ5 PLC & Yaskawa SI-ES3 EtherCAT Comms board for A1000 VFD?  I have looked at the manual, but as I am still green on Sysmac & Omron programming in general.....not sure I understand what to do to simple Drive Status monitoring, Execute RUN/STOP & Speed Select... Thanks in advance :) 
  4. Sysmac NA5-Series HMI

    Compiled my HMI file I am currently building in Sysmac Studio for my NA5-Series display.  Not finished, but I executed a Build and this is what I got....I have absolutely no idea what it means...... Thanks,
  5. Is there any instruction in Sysmac Studio Structure text to detect rising Edge (DIFU/DIFD) ?
  6. Task Priority 16

    I have made a fat bloated program that runs too slow. I tried working under the philosophy that "Premature Optimization" is the biggest time waste in developing programs. Now my program takes to long to run and throws a task error. I am attempt to cut the primary task's cycle time down I tried to move programs that use IO to other tasks. Task 16 is supposed to be able  to handle IO but it doesn't come up as a selection choice of priorities for me. I can do 17 but I get errors trying to use IO variables at that priority level. NX102-1200 controller, Sysmac Studio 1.30.1. Should I be able make a task at priority 16? I have some analog IO that I don't need to update every millisecond and I have some data and loop intensive FB's that only need to run once hour and I'd like to get them off my primary task's to-do list. I'll be busy re-writing my program FB's to accept specific variables instead of bloated structured variables and converting and changing Lreal's to real's and some other Premature Optimization tasks so I can run the sucker. 
  7. I am using Studio 5000 View Designer v4.3 to create an HMI on Panel View.  I'm having a weird issue where every time I open up my project, the windows are displaying only in the lower right hand corner.  This wasn't happening earlier.  Undocking the window, expanding the window, uninstalling and re-installing View Designer have not helped.  Trying to open View Designer as an administrator has not helped either.  I know there are better HMI platforms, but I am basically complete with the construction of this HMI using Studio 5000 View Designer and now it is too late.  I just want to add a few more buttons and I can't do it because I can't see the bottom of any of my windows.  Since Studio 5000 View Designer is based in Visual Studio, maybe someone would know how I can fix this via Windows registry files?  
  8. I am new to Omron Programming, Sysmac Studio NJ processor & NA hmi.  I am used to being able to create diagnostic PLC logic using BIT addressing from a DINT variable for setting diagnostic signals for an HMI.  I can also use the DINT to do a quick check to see if it is greater than 0, therefore signaling I have a Machine Fault.  I cannot seem to figure out a way to get those BITS setup in the User Alarms of the NA programming.  I have found where you can setup a Datatype/Union to be able to use the DINT scenario and Bit level in PLC programming....but that doesn't help on the HMI side. Any thoughts??
  9. NJ Modbus

    I need to write c# with modbus TCP to read NJ,  Anyone able to to use PC communicate with NJ by using Modbus TCP?  Any Function need to be added in the PLC, for Example , PC to read Register 40000 to 40020 ?    
  10. hi dears, I have one CS1D omron Redundant controller ( CP65H) that must be connected to NS15 Touch panel. I want to use Ethernet for connecting HMI and CPUs (CS1D-ETN21D). I have one question. for NS15 we can use CX designer and sysmac studio? is it true? which one is better? what is your recommendation for HMI software? Thanks.
  11. How do I edit an array size ARRAY[0..13] OF REAL to ARRAY[0..15] OF REAL? Sysmac Studio doesn't allow it to be done online, as far as I can see. If I do it offline and then go online and Synchronise, Transfer to Controller I receive error Any ideas?
  12. Trying to connect our old Sysmac C200HE PLC to the CX-Programmer software however, failed connection appears. We are using a USB-Serial connection and have set up the comms on the device manager. To try and connect to the PLC we are using the Auto connect function, selecting the usb-serial connection and selecting the comms the same as the host network. Any help would be greatly appreciated.
  13. Hey guys I have searched the forum, but can not find the answer I am looking for. I have an Omron Nx102-9000 along with an NA5 (9 ") that I use to control an industrial furnace. I need to set an output one at a given time (date and time)  A time that should be able to specified from day to day via the HMI Is there anyone who can help me? Then I would really appreciate it
  14. Good morning, I am working with sysmac studio v1.25 controller NX1P2 and HMI NA5. I have been trying to link and modify members of an structure in HMI without success and I don't know if i'm missing some syntax or if it is even possible what I am trying to do. 1. In the PLC I have the struct "Formato" and global variable "Formatos" which is an array of Formato. 2. I have mapped this variable to the NA5 so I can use the same data type. 3. I am trying to give a value to the members of my struct with a recipe of the HMI. I am trying with different syntax, with AT connection, without AT connection and none is working for me.   Is it possible what I am trying to do?   Thanks very much in advance,
  15. Hello everyone, I have a problem with packing machine. There are some issues with one of the axis, when axis actual position is near to 1800000 some error appear and operator has to turn off machine on main contactor. This axis is working in Linear mode. I think that rotary mode would be better for this axis. And here is my question. Which instructions, and what options i should change/check when i change count mode in axis's options. Can any1 point me some manuals to read or give me some advice ? Thank you in advance.  
  16. I need to import/export all recipe templates to/from a single csv. file Anyone with a Solution for this? Thank you 
  17. Hi there,  I am considerably new with setting up E/IP on OMRON's NX1P2 PLC. I have been trying to connect a Keyence IV-G to my PLC with E/IP connection (because there's no analog I/O available) and struggling with getting a connection going between PLC and camera. I connect these two through an unmanaged network switch, which I believe doesn't need any further configuration. I have set tags on Built-in E/IP inside SYSMAC Studio, and when I monitor them it says "normally resolved". Unfortunately, it still has red dot which means connection is cannot be established. The error I'm getting is "Tag data link connection timeout". Maybe built-in E/Ip just doesnt work for this case? I have yet to try getting connected with Network Configurator, but have the feeling that it will just accomplish the same thing that I did with Built-in E/IP inside Sysmac Studio.
  18. Hello, I'm looking for sample program to communicate Cognex DataMan 262Q, now i have connecting by Tags, 496 bytes input/output, but in manual i see :  
  19. I am trying to use the Event "SaveUserAlarmLogToFile" tied to my F1 button to save my alarm history to my SD card installed in my screen, but I can not find any details on how to specify the file name for the save...can someone please clarify what should be entered for the file name?     Thank you!!!!
  20. Hello everyone, I have this message when I trying to open my project which I did.  "The project includes a model that cannot be used with the current license. The project is closed." I recently reinstalled windows, but version of Sysmac Studio is same, License is same, but now I not be able to open my project. I just tried to install last version of Sysmac Studio 1.25, and of course nothing changed, looks like issue with license. But again, license is same.
  21. I'm very new to sysmac. I am trying to display the current date and time in the corner of each of my HMI pages. I saw a button labeled date and time. It is asking for a variable for behavior. Do I need to write some basic structured text or FB in plc to get date and time and pass it over? I figured the button would update itsself since when I placed it on the screen it had the current date and time and refreshes every time I leave the page and come back. 
  22. NA5 Orientation

    I was wondering if the NA5 could be flipped for a portrait orientation, I am working on a new project that has serious width restrictions!  I looked through the Sysmac software but could not see anywhere that it could be done in the hardware configuration.   Thank you!!
  23. Good Evening, using the Ethernet Built-in LAN I need to program 4 power supply. I'm tryng to program the firstone but even if I can send the correct command to the power supply I always recive a 2006 error on SKTTCPRCP function Is there someone that can help me in order to not receive the 2006 error code? Have I to respect a procedure? It seems that at the second connection time the socket remain closed. Thank you!
  24. Hello All I am new to sysmac studio, i am using a NJ301-1200  and R88M-KN10H servo drive , i connected the servo to the NJ using ethercat. I was able to write a program where i was able to activate the servo from the NJ using the mc_Power instruction . My question is , i am not able to run the servo using the mc_movevelocity and mc_moverelative . Do any one have any suggestion to how to go from here ..  
  25. I am a long time Omron user, but this is my first time using the Sysmac software, I want to compare the 16 bits of my array to zero, if any of the bits are on I want to turn on an output, I see the AryCmpNE and AryCmpNEV, but they have a seperate bit for each item in the Array, is there any way to do this without using Unions?   Thank you!!