Search the Community
Showing results for tags 'sysmac studio omron nx1p2'.
Found 718 results
-
Good day everyone, As everyone knows, NB designer is not as good as CX-designer in general terms. My case is this one: All systems at my company use NS series and some of them NT series PT's. So there're 20 of them, or so. Now, I have bought a new NB5Q-TW00B, and I need to program it. Is it possible to migrate the program from a NT or NS, to a NB ?? I've read you have to design all the project again. It'd take value time just to copy the same project. I think it should, because it's the same brand of Operator Panel, Omron. Thanks.
-
Problem in communication between Omron CJ2 and AB L33ERM
hamtarociaooo posted a topic in CX-Programmer
Hi, i have to connect few PLC on the same subnet, there are 3 Omron CJ2M and 1 AB L33ERM/A, the connection should send some words between one of these Omron PLC to the AB I've tried using the "Explicit Messaging" but i cannot send the data, i only receive the error "514" and nothing more, what can i try? -
hey! I'm pretty new to PLC's, and I'm supposed to ''teach'' the people at my internship how this PLC works, but I have encountered a problem. I've gotten pretty far with all the digital programming and understanding how everything works, but I just can't figure out how the analog inputs/outputs and programming works...... I've had a fair explaination on PID and how this works. I've searched the web as well to figure out what PLC instructions to use. I hope you can answer my following questions. 1, what are the most used PLC instruction blocks which I can use for temperature control, and how am I supposed to use them? 2, Could you please give me an example on how to use PID and what numbers will I need for the calculations? 3, what are the most used PLC Instruction blocks (apart form the analog ones) that I should include in my tutorial? this is my setup: Ethernet switch MOXA EDS-205 Plc voeding PA202 PLC CPU CJ1MCPU11-ETN Digital IN (16x) CJ1W-ID211 (SL) Digital IN (16x) CJ1W-ID211 (SL) Analog IN (8x) CJ1W-AD081 (SL) Analog IN (8x) CJ1W-AD081 (SL) TRANS OUT (16x) CJ1W-OD212 (SL) TRANS OUT (16x) CJ1W-OD212 (SL) Analog OUT (4x) CJ1W-DA041 (SL) thank you soo much for looking at my question and considering helping me! the OMRON helpdesk hasn't been very helpfull. kind regards, Deuslupos,
-
Enable or disable a button on Panelview Plus 7
Andy_P posted a topic in Allen Bradley / Rockwell Automation
Using a Panelview Plus 7 HMI with FT view Studio. Is it possible to enable/disable a button? I can't find anyting on the button 'Animations' menu or anywhere else. Thanks. -
hello, looking for some troubleshooting help with an omron ea5k-aa2-500 controller. I work in a conveyor belting shop and the controller in question is one of two used in the control box for one of our belt presses. the controllers work in tandem to control the temperature of the bottom and top of the press heads. Recently a co-worker was dialing down the set temperature on one of the controllers and might have went out of the limits of the program. Now it is stuck in some type of shutdown loop. When powering it on it displays "0000" on display#1 before showing the temp. value and the set value of 0 for a split second , then turns off and loops. My question is if there is someway to reset and re-program the controller, or is it time for a new one. Sorry for the lack of knowledge of the controller, any help would be greatly appreciated.
-
Hello, The company that I work for wanted me to design and build a FIFO loader. For those who do not know what a FIFO loader is, it's basically a lift that runs up and down and filling up the magazine slots with pcb's. After I finish the mechanical part i'll try to program it by using a CPM2C - 20. I have already played with CX-programmer and learned my self a bit, for example how to program simple things such as AND and OR gates for controlling motors and lights. Really hard part for me was figuring out how to create a program that reads data from the encoder and use it to create positions which the motor will stop at, and i have not yet figured it out. I've been trying to google it without any luck, the only thing of real info i've got is a 650 page long pdf file or CX-Programmer manual which is hard for me to read since i'm new to all of this. Would be great if any of you people got any source or maybe a manual which are easy to understand for new beginner like myself. A bit about the program i would like to make: The FIFO loader will have some buttons for selecting different programs, lets say you press first button to select "program 1". Then the machine should move up and stop at posision "50" (there are 50 slots on PCB magazine) after it gets signal from pneumatic actuator (which will be used to shove pcb inside the slot) its should move to position "49" and so on.. If FIFO loader is located at "home" position and you press second button to choose "program 2", then it will move to slot "49", wait until it gets loaded, and continue to slot "47" and so on.. The meaning of this is to make a loader which can select a program to fit pcb's with different size of components.
-
Hey everyone, I am having trouble with Studio 5000, i have just finished installing the software and my toolbar is all messed up (see attachment). can anyone help me with this? really appreciate all the help. Thank you,
-
hello guys is there any one know how to setup default gateways on OMRON PLC CJ1M? cause there is only setup for IP address and Subnet mask.. am trying to control the PLC using Ethernet through Wide Area Network.. so if there is no Default Gateway, the connection PC to PLC will totally lost
-
I have an application I am currently working on where I have a single AB ControlLogix PLC that needs to read data from 12+ Omron CJ2M PLCs. The Omron PLCs don't need to read any data from the AB. I have tried several things including the generic .eds file from Omron and the instructions in the document I found on this site: Omron CJ2 to Rockwell ControlLogix Ethernet/IP Datalink. The generic .eds file gave me a D6 error on the Omron side and after talking to support it does not seem like the correct path. When I tried following the instructions for the datalink I ran into several issues. The first issue was that after configuring my network in the Omron software upon trying to load it I got a unit mismatch message for the 1756-EN2T, the .eds file I have is for a 1765-EN2T but the card shows as a 1756-EN2T/D, so I am concerned that could cause an issue...that being said I can't find any .eds file specifically for the /D revision. The next thing I noticed was that there doesn't seem to be be a way to link the produced data from the Omron to the AB, the Omron configuration software with the AB .eds files loaded only gave me the option to send data to the Omron which we do not need to do. I created a generic Ethernet module in my RSLogix program for the Omron PLC and then created a consumed tag and linked that to the module but I do not see where I set up the link on the Omron side for that, so how does it know what addresses to read?? Any help would be greatly appreciated!!!! Thank you! -
Hello Experts I am facing problem with CJ Series Analog I/O module MAD32. The Run LED is Lit, ERC Led is also Lit. what could be the reason?
-
my CX supervisor runtime has failed. when i build a runtime, SR2 built succesfully, but when open the SR2 file theres nothing pop up on my runtime. Event/ error log tell that failed to open device, non-specific error occurred: PLC, [CX-Server: MANAGER, ERROR, 0x8825]. How to solve this problem..please help me
-
Hi guys, I'm having a problem on how to save the home position for omron servo driver. How does the servo driver know where the home position is after turning on? Btw, I am using Mitsubishi FX3u for my PLC
-
Factory talk View Studio Legacy conversion question
Adam.W.Ackerman posted a topic in Allen Bradley / Rockwell Automation
I hope I am posting this in the right location, I did not see any sub forums specific to Rockwell or Factorytalk. We are finally converting from XP to Windows 7! WOO-Hoo! It has gone fairly well but I see one issue that has me concerned and I would like to resolve it now; my application converted fine except my translations did not come across. We have two base applications we build off of that correspond to the type of machine they are used for; both support multiple languages which are selectable with an on screen VBA based button that does a bit and language change in the background. One application supports English and Russian while the other is English and Spanish. I have tried doing the import on Windows 7 in both languages related to the application I am working with and the alternate language (in this case it is Russian) never comes across. I have tried both the direct copy and .apa methods with the conversion and the results are the same. Is there a step I am missing during the conversion process or will I have to export my languages from 6.0 and import them to 8.0 separately after conversion? I am not thrilled about this process as it never seems to keep the proper layout of the text when imported. I assume the issue is the conversion process as I can load the .apa on a fresh XP build and the languages are both present. -
I am trying to learn how to use add-on instructions, and to get a better understanding I am trying to do a simplified example. I am trying to make two separate add on instructions that alter an integer tag in different ways. I would like one AOI that multiplies the input integer by 3 and another AOI that adds 3. The integer tag is a InOut parameter. I named these AOIs "Mult3" and "Add3". When trying to use the AOI's it requires me to have an additional input with datatype the same as the AOI ("Mult3" or "Add3"). I have a couple of questions about this: 1. Why is this data type required? It seems to me that I would only need the InOut integer that I want to modify. 2. I want to use these AOI's in a number of places throughout my code on a number of tags. Would I be able to just use one "Mult3" tag for all the AOI's, or would I need a seperate tag for each use of the AOI? For Instance if I am using the Mult3 AOI in 3 separate places in my code, two times using "Int1" as the InOut parameter and another time using "Int2" as the InOut parameter, could I just make one tag of "Mult3" datatype and use that for all the instances of the AOI, or would that screw it up in some way. Thanks for any help.
-
Hello everyone, so I noticed in Omron's CP1E manual, there are no certain info on maximum number of Modbus Slaves that can be attached, however the PLC itself able to connect to slave number 1 - 247 I have read from common MODBUS specs, that 32 slaves are the limit for most MODBUS connections. However there are also statements that with proper design (1/8 transceivers) that we can extend number of connected slaves to 256. Anyone have experience or info about this with Omron PLC? Thanks in advance
-
Thanks for any help. -
i have this code in c# in order to communicate to cj2m using etheret cable , but i get a connection error ( u can't reach : 192.168.250.1 :9600 ) is there any configuration that need to be done on the plc ? i mean i don't quite get (the node and all thoese properties i fnd on cx-programmer) ?
-
PAROCK1 for HMI/SCADA View File Now a software solution is available for your Modbus (MB) needs in Rockwell/Allen-Bradley Control Logix or Compact Logix (Clgx) family processors, instead of a traditional 3rd party hardware like Prosoft MVI-56, Molex SST-SR4-CLX-RLL etc. It is an Add-on instruction (AOI) for PLC/PAC firmware v16 or later, (other solutions are available for pre v16 systems). For hardware interface, use PLC’s channel 0 (serial) or TCP/IP Interface module(s) to have as many MB TCP/IP devices or serial devices. (Some limits apply based on system configurations, Comm. settings depending on HW used.) Connect any MB Client/Master or Server/Slave device(s) to your CLgx PLC, including flow computers, analyzers, VFDs, Power Monitors, Level gauges, Smart I/O, etc. All the MB public/native function codes are supported. 32-Bit integers/floats as single entity are supported with byte and word level swapping. A separate utility automates the data mapping to your PLC logic. Features -Serial Master (BASIC required Option); TCP; Slave; Redundancy; More than 5000 accumulative registers; MB CFC (Custom/Private Function Code) Support; Data mapping too – Between PAROCK1 & your PLC logic; Packaged with Rockwell; TCP/IP Interface Module; Volume Discounts; Annual Support Requirements -Rockwell/AB-CLgx processor with v16 or later. Contact PCI for earlier versions. -If using CPU’s Chan0, you cannot use Chan0 for any other user mode activity. You can use it for non-user mode activities -TCP/IP Interface Modules from Rockwell/AB supported, are: -1756-EN2xx ControlLogix® Ethernet/IP communication modules, firmware revision 5.007 or later -1756-EWEB ControlLogix Ethernet/IP web server module, firmware revision 4.006 or later -1768-EWEB CompactLogix Ethernet/IP web server module, firmware revision 1.002 or later -1769-L30ER, 1769-L30ERM, 1769-L30ER-NSE, 1769-L33ER, 1769-L33ERM, and 1769-L36ERM CompactLogix controllers, firmware revision 20.011 or later -1769-L24ER-QB1B, 1769-L24ER-QBFC1B, 1769-L27ERM-QBFC1B CompactLogix controllers, firmware revision 20.011 or later -1769-L16ER, 1769-L18ER, 1769-L18ERM CompactLogix controllers, firmware revision 20.011 or later Other Related Services/Items -Custom PLC Add-on instructions building -PLC upgrades, troubleshooting, applications -PC Windows, iOS5, Linux, Mobile devices Comm. Drivers -Custom development, Technology Transfer Services -Other Non-AB communication drivers for serial or TCP -Full control system integration, training, architecture design This driver can be conviniently used with Visual Studio in development of complete large scale complex HMI/SCADA Systems. It can be used to perform advanced reporting MES, analytics, IoT, Big data type apps. One example is available to download here For More Info Overview of Parijat Drivers: Click here Additional supporting Info about Parijat Drivers:Click here Complete Related Driver options: Click here Submitter Scadadoctor Submitted 03/10/16 Category Other PLC Demo Software
-
Hi i am trying to connect to omron plc (cj2m ) using modbus tcp/ip , by using the port 502 i get an error saying that the port can't be reached is there any method to fix that or change the port number ? thank you
-
Hi i am trying to connect to omron plc (cj2m ) from my pc using modbus tcp/ip in c# , by using the port 502 i get an error saying that the port can't be reached is there any method to fix that or change the port number ? thank you
-
I have a 16 position rotary selector switch I'm trying to program to a CQM1 PLC, that I will also be programming to a micrologix 1200 in the future, using CX Programmer. The switch connects to the PLC using 4 inputs, and activates the inputs in a binary pattern 0-16 as I turn the switch. For example: if the switch is wired to the first four inputs of the PLC, and is turned to "9" 0.0 and 0.3 will be activated and 0.1 and 0.2 will not, just like binary 9 = 1001. I have tried several things trying to get the PLC to accept these inputs as a single "data-point," and then convert to BCD or Hex to use in a timer. I'm having no luck! Does anyone have any ideas how this is done? The switch is a Tosoku DPP01 015L20RCB, and because of the age of the PLC my instruction set is limited. Thank you in advance!
-
Good Day! i have an omron hmi and i would like to connect it to sengenuity wireless temperature sensor without a plc..is it possible?.. see the youtube link for the video sample https://www.youtube.com/watch?v=F_MPLS9ih4g Thank You for your help.
-
Hi guys, Im new to PLC and im just starting out with the omron cp1e-e. What are great sources for ready files? Is there anywhere online where i can look at different programs for different scenarios ? Thank you
-
Hi, there, I'm totally new to OMRON PLC, right now I'm using CP1H PLC have two CP1W-CIF01 on it 1st CP1W-CIF01 set as 115200, 7,2,E, Host Link, station 0 connected to Pro-Face HMI 2nd CP1W-CIF01 also set as 115200, 7,2,E, Host Link, station 1, I want to use this COM to talk to my PC that I can run vb.net program to monitor the bit and set the bit value. can you guild me how to start this project? thank you very much! Chen
-
HI, i am new user here and it is my first time using Omron PLC.I fail to add the expansion cards (CJ1W-3ER AND CJ1W-ADO41) to CP1E-N40 CPU.There is no I/O table listed for this model in CX-programmer.if i change to other model, yes, there is IO table, but CP1E without the table. Appreciate for the help to add in the expansion card in CX programmer. Thanks in advance.
