Search the Community

Showing results for tags 'sysmac studio encoder'.

  • Search By Tags

    Type tags separated by commas.

  • Search By Author

Content Type

Find results in...

Find results that...


Date Created

Last Updated

Filter by number of...

Found 316 results

  1. Hi and thanks for youre time  I am a newbie trying to connect to a 1769-L30ERMS using an Ethernet cable. I am using Studio 5000 and RSLinx Classic lite for programming and communication. However Studio 5000 and RSLinx Classic lite are installed on av virtual machine using VMware.  So my problem is two fold. Connect the VM so that it reads from the real computers ethernet port Find and communicate with the PLC from the VM There are guides on how these problems are addressed seperatly. For example https://www.youtube.com/watch?v=JdArYVceO1I and https://www.youtube.com/watch?v=ERLTvcBBK_w however I have not been able to get them to work together. So I was wondering if you, the sages of PLC programming might have some tips or trix that I could test or perhaps even a guide for how to do? Mvh Eric
  2. Hi All,Cx-Supervisor, NJ501-1340, Sysmac Gateway.I have been writing an update for a project and converting to this new controller.It's a pretty big project.Using a combination of Ladder and ST.Using Cx-Supervisor 3.5.I created some new Variables in Studio and made them Publish only.Started to create Points in Supervisor and made them I/O connected to the variables in Studio. No problems everything was connecting and working just fine.Then one of the points would not update. I could change it in the PLC and it would not change On the HMI.I deleted it and recreated it and it did the same thing. (sometimes points in Supervisor just stop working and recreating them fixes it).I then copied the control and pasted the old point into it and it did the same. Then other started to fail. Showing no reaction.I stopped the gateway and restarted, no help, I rebuilt the HMI, nope.The can check the tags in Sysmac gateway and they always change when the PLC changes but not the HMI.I checked the point maintenance in Supervisor and it would not change.I dumped all the affected variable in the PLC and in the HMI and recreated them. Then it got stranger.I could change some on the HMI and it would show in the PLC but not the other way.This is on Bools and UINTS.Stopped CX-server, tried using it with Win8 compatibility. nope.Pulling my hair out now. I should be coding but I'm trying to get the apps to work.Any ideas will be used with thanks.Peter
  3. Hey group! I am working on a project that has a machine that forms cartons that will drop the cartons into a cleated conveyor after they are formed. The forming machine needs to be synchronized with the cleated conveyor so that the formed cartons will drop in between the cleats as they pass under the forming machine. So, in essence, the conveyor will be the master and the forming machine will be a slave to the conveyor and match its position accordingly. Initially, it was proposed that the conveyor utilize a CIP encoder so it could be set up as a motion axis, but the customer declined that option as they didn't care for using CIP encoders (can't really blame them!). So, a slightly cruder proposal of using two 1024 count encoders was proposed, which they accepted. However, your friendly programmer here isn't quite sure how to make that work! I think the basic concept is encoder following but but I can't seem to find anything online that really describes the actual process or logic for this. The RA Sample Code site doesn't seem to have anything on there but maybe I just haven't entered the right search keywords. The forming machine has the following notable components: 5069-L310ER 5069-HSC2xOB4 PowerFlex 525 drive 1024 count incremental encoder As noted, the idea is to have a 1024 count encoder mounted on the conveyor with some sort of ratio so that the counts will run the pitch of the cleats 508 mm). Some trickery will have to worked in to get them to sync at the right time but for the time being, I'm just looking for a method to do the encoder following and asking the group if anyone has some ideas, or better yet, a method, of how to accomplish that.
  4. Hello, I guess everyone knows the current availability situation with electronic parts. Due to this reason I'am looking for alternatives for the Omron NA-Panel series. I'am curious if you guys already made some good or bad experiences with third party HMIs in combination with NJ/NX PLCs. It would be a pleasure if you could indicate some brands that will work.   Thank you in advance.
  5. I'm editing a dual language project for an NA5 HMI. It's working fine except for the message at startup. To modify the project I've had to update the firmware on the HMI. I'm using Sysmac Studio 1.15. Startup language seems to be set correctly. Any ideas?

  6. Sysmac studio not installing

    DR1980_80 posted a topic in Other PLCs

    Hi, I am currently trying to install sysmac studio v1.43 on my computer and I'm getting an error at the beginning of the installation process (see picture) From what I have seen on this forum I am not the first person living this situation and it seem that the user asking for help on this forum had his issue resolved with the use of a previous version, V1.25 I believe, and I was wondering if it anyone could help me with this problem to either patch it or get a compatible version for my computer.      

  7. Unable to delete a screen

    lqu@edgeautomation.ca posted a topic in Allen Bradley / Rockwell Automation

    Hello AB professionals, I am using FactoryTalk View Studio v11. I am basing on an old project to build my application. I restored the project from a .mer file. I deleted or renamed some old screens, saved and closed the project. But when I open the project next time the screens I deleted still show up. When I click on it it will show an error message "Component does not exist".  In the FactoryTalk ME application, I right click a screen name on the left tree under the Graphics, and then click "Delete" or "Remove", the display would disappear at that time. But it persists on coming back next time I open the project. If you know the solution to resolve please reply. It is much appreciated.   Thank you. Lei
  8. I'm working on a program where I manipulate REAL numbers in Sysmac studio using an NX1029020 PLC. My problem is I am new to automation and I don´t know how to display those numbers when connecting to an NB HMI. I´m trying to send the data to a bar picture and a number display. My question is which AT Specification Attribute should I assign to my variables in Sysmac Studio and their corresponding Area in NB-Designer? I tried using the DM area but it didn't show numbers on the displays, only shows *****. Should I convert my real variables in Sysmac first? Or how can I keep decimal numbers and then display them? My current configuration in Sysmac: Name Data type AT Network publish ST1 REAL %D5 Publish Only ST2 REAL %D3 Publish Only My current configuration in NB-Designer Bar Picture Addr. Type D Address 3 Code type BIN Number Display Addr. Type D Address 3 Code type BIN Data type Float Integer 4 Decimal 2
  9. Hi all, Can i rename the master of numbered project (#1, #2... create used "save as new number" function)? Actually i can only open preferences window of the last number, and only edit Author and Comment. If i edit one on these two it only change it on the last number. Are there a method to change preferences for the "master" project and all the sub-number? If i would rename a project now i have to save as different project, and loose basic version control that numbered projetc provide (enought for me) and generate more confusion. In the single project i have no problem edit all Preferences include name. Versione: Sysmac Studio Standard Edition 1.47 Thanks, Andrea.  
  10. Hi!   I am new to plc-programming and i need few tips to finish my first project   question 1: What is best way to convert bool's, lint, time and real into array?     question 2: What i need to have for transferring that array into company's Http/web and how to do it? modem?   Thanks for helping!    
  11. Currently have NX PLC setup as an OPC UA server and an OPC client setup and communicating.  The issue is only tags that do not have a Data Type are showing up in the OPC client.  I have 2 separate OPC softwares connected to this plc through OPC UA and both are having same issue.  If I setup the OPC as a polling service, then all the tags show up as expected.  Does anyone know if this is a known issue with Omron and their OPC UA server, or is there something that I am doing incorrectly (possibly a setting within Omron that I am not aware of)?
  12. Hi. I use the email block on few of our NJ101-9020 controllers to send out daily reports or any status updates. Recently the PLC's started an unknown issue and fails to send email out anymore. I use the Mail_Send function block from Omron to send emails. The only Error ID i can get is 2005, with status being "Connection to SMTP" failed. Looking at the troubleshooting guide, i cannot find anything to do with error id 2005, in fact its missing. There is 2004 and 2006 but no 2005. I've tried all the obvious thing like, power cycle, redownload the whole project, create a new instance of Mail_Send function block etc. Nothing seems to have fixed this unknown issue. Our IT department did a full check on their side and nothing seems to be out of order. I can still remote into the PLC, so i dont know what exactly is the problem. Has anyone came across this error ID before? Any ideas why this might have been happening? It was working well until few weeks ago and nothing changed and this suddenly started. Any input is really appreciated. Thank you.
  13. OS: Windows 7 on VMware virtual machine. Sysmac Studio V 1.13. What works: Ping to PLC. Sysmac Studio -> Controller -> Controller Communications -> Ethernet via hub -> Test -> "OK". What doesn't work: Starting with new project for NX701-1600 (correct PLC): Sysmac Studio -> Controller -> Online. -> Controller -> Transfer ... -> From Controller. The task seems to run to about 90% before stopping with the error:  I can't find any reference to this error in the manuals. Has anyone got any suggestions to fix this?   Many thanks.
  14. Hello! I have been working with a Factory Talk Studio V8.0 and my computer was crashed, "blue screen". After this, I can not open my panel project anymore, I only get information Failed to open factory talk private directory for the application. How to save my project?  
  15. View File Sysmac Studio Simple PID Example A simple test program and starting values for the PIDAT instruction in Sysmac Studio. Simply run the simulator (Simulation-> Run) and toggle the Test_PID bit. Simulated feedback will allow the loop to operate normally. The setpoint can be adjusted by modifying the PID_SP variable. There is a pre-programmed data trace that traces the SP, MV, and PV. To use the data trace navigate to DataTrace0 and start the trace, flip the Test_PID bit true and the trace will log 10k samples. Submitter photovoltaic Submitted 02/13/22 Category PLC Sample Code

  16. Sysmac Studio Simple PID Example

    photovoltaic posted a file in PLC Sample Code

    Version 1.0.0

    60 downloads

    A simple test program and starting values for the PIDAT instruction in Sysmac Studio. Simply run the simulator (Simulation-> Run) and toggle the Test_PID bit. Simulated feedback will allow the loop to operate normally. The setpoint can be adjusted by modifying the PID_SP variable. There is a pre-programmed data trace that traces the SP, MV, and PV. To use the data trace navigate to DataTrace0 and start the trace, flip the Test_PID bit true and the trace will log 10k samples. Change the SP and view the behavior when the trace finishes.

  17. Encoder for fx1n

    Kristof posted a topic in Mitsubishi

    Hi all! How can I use two AB phase encoder at the same time. I use Mitsubishi FX1N PLC, and I would like to use a high speed counter. I think the plc has 6 high speed counter input, but I cant use only one at same time.
  18. The summary of the issue is when attempting to update any hardware file or technology package, the package will hang up in the “copy setup” status. This state will remain indefinitely – no further progress is made past this point. These are the steps that I have used to troubleshoot this thus far: I always run Automation Studio as an administrator I have redownloaded the program a couple of times, storing the downloaded ~8 GB package in C:/temp Temp files are cleared prior to launching Automation Studio I have tested different internet connections. With and without going through the company VPN. Launching the package via local and internet connection to isolate if it is a TCP port blocking issue. At this point I’m curious if there’s different registry key changes which allow for deleting files from temporary directories… but that’s just a theory. I've attached some screenshots.    What the function of the copy setup state? How can I progress past this state?    I'll keep banging on the keyboard to figure this one out but if there is a good Samaritan out there on the web it would be MUCH APPRECIATED!
  19. I am new to automation systems and devices and I just want to know how to connect two HMI's (each one would control different things) to one PLC using Sysmac Studio and NB-Designer via Ethernet. The model of the PLC is NX1029020 and the HMI's are one NB10W-TW01B and an NB7W-TW01B. I searched for info about this topic online but I couldn't find anything that worked for me, I saw an article from OMRON where they connect two NB's to the CP series, but in my case, NB designer doesn't allow me to insert more than one HMI in the same project, I also found something similar on a youtube video that gave me an idea about how to connect multiple HMIs exporting the pks file and importing it to another HMI project but I still can´t figure out how to add both to my PLC. I would thank you a lot if you could help me with this because I know it's not a rare implementation, just I haven´t found the right way to do it. I also leave the links to the Omron article and the youtube video I found. https://www.myomron.com/index.php?action=kb&article=1554 https://www.youtube.com/watch?v=rXx5lut7G9I
  20. Hi, Could anyone help me out on how to extract the digits present in a string in sysmac studio... Thanks in advance !!!
  21. Hi, I have to implement an axis control in a NX1P2 PLC using an inverter (3G3MX2) and an encoder cabled on a EC0122 board. I found something similar implemented  on a CJ2M PLC, but I have no idea how to set up the axis in the configuration of sysmac studio and how to implement the control. Can someone help me? Some sample to catch out the configuration?   Thanks a lot Andrea
  22. Hi. I have been thru the F1 manual and the toolbox in sysmac, i cannot figure out how to convert the elapset time from a TON, to anything the NA5 panel wants to display. Any suggestion? (Want to show how long a certain step has run for)
  23. Hi, I have quite a noobie question. I want to create a function block to do some simple operations on 2 variables. Both variables are In/Outs (see picture attached). How can I make this function accept variables regardless of the data type? Given these is just simple math I am able to use the same instructions in REAL, INT, UINT, etc. But, the function block only lets me assign one Data Type to the In/Out variables.
  24. Hi. I want to get the full date and time into the plc, where i want to calculate when current step and full sequence is expected to finish and then later present it back on the screen. I tried to map the _HMI_DateTime to the controller, but it does not get added to the controller.
  25. Good day everybody!    I am having issues troubleshooting a machine which is controlled by a VIPA PLC. I must admit that I am not very knowledgeable with this brand so I am a bit hesitant to touch anything. From the machine's supplier I got a .wld file which I could load into an SD card and load into the VIPA PLC itself through a Master Reset procedure. Still, our issue persists so I was wondering if I could somehow extract this .wld file into Speed7 Studio (or another program) to visualize it and try to troubleshoot the issue. Or in another case, if there was a way to directly read the currently loaded program from the PLC.    As I said, I had never worked with this brand before so I am being a little overly cautious with what I touch in this PLC.    Thanks for your help!