Search the Community

Showing results for tags 'sysmac studio uploading'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 164 results

  1. Friends kindly help me I need to create ton and counter macro function in factorytalk view studio 
  2. Setting the NB Clock based on the NJ NX Clock View File This document details the updating of the clock on the NB based on the clock in a Sysmac Controller. Submitter Michael Walsh Submitted 05/14/20 Category Tutorials and Quickstarts
  3. Version 1.0.0

    26 downloads

    This document details the updating of the clock on the NB based on the clock in a Sysmac Controller.
  4. Axis Attribute Error

    Hello All, First time working with PLC. Get the hang of it from stuff I researched. Having an issue with an axis setup for a servo motor.  When I try to do an auto tune it gives me an error that axis is not configured.  Source: Config Fault    Condition: MotorDeviceCode- INvalid attribute      ACtion: Immediate Stop Fault Entry: Type 8, code 9 subcode: 1314 stopaction: 4 Statechange: 3   I was wondering what am I doing wrong? Any leads or source information I can use to solve this. 
  5. MPG WITH OMRON NX CONTROLLER

    How we can connect MPG with omron NX SERIES CONTROLLER. PLEASE HEALP 
  6. NA Data History Program

    Does anyone have any idea how I can create a Data History though the NA screen. I know I can do a Data Log with a Data Set then use a Trend Graph but, I want to create the "Table Like" Data History found in the Omron NB screen. I use data histories for a UI to an operator to review previous Cycle Times, Poka Yoke values, and Temperatures monitoring with a time stamp as to when the data was recorded. Any ideas?  I am using a NX102-9020 NA5 Screen
  7. Hi, I'm fairly new to motion applications and I have an interesting (to me) problem to solve. I'm using Kinetix 5700 with MPL motors to drive a pick&place carousel and a conveyor belt. I have a virtual master that driver the carousel in 1:10 ratio. The virtual master also drives the conveyor belt, the ratio is given by the carousel diameter and the conveyor driving cylinder diameter +  2x the belt thickness. And I'm using MAJ to drive the master and the MAG instruction to drive the carousel and the conveyor. This all works well. BUT: the carousel does not pick the product in the same place every time. That creates irregular gaps, or pitch, between the product on the conveyor which causes some issues down the line. Is there a way how to superimpose a value to the conveyor axis to ensure the pitch is regular at all times. Something like the ADDAX instruction it Trio motion controller for example? I'd want to have a sensor that detects the edge of the product and compares he encoder value to an expected value and slows downs or speeds up the conveyor accordingly. Thanks a milion.
  8. AVE instruction Error

    A little background information here, I am trying to create a moving average so I accomplished it with the code (imaged attached) The problem i am having is the AVE instruction error bit goes true. it leaved me with a result of 1.#QAN  I did some googling and it said this is typically done when dividing by zero?? so i added a NEQ to 0 prior to loading the array. then it happened again. so i put the error bit in front of the FFL so it will stop loading the array when i get the error bit so i can see what values are in the array when it errors out. Has anyone else had this issue and what could you do to resolve it? I haven't had any luck find something that points me in the right direction. Thanks in advance for your help.
  9. Hello there, I am using a Kinetix 5700 drives to control bunch of axis. HW used : 5069-L320ERMS2 GurdsLogix, 2198-S086-ERS4 Servo Drive with MPM-B2152M-M motor and the 843ES-SIP12BA6 safety encoder. All is working fine except I can't figure out how to dynamically change an axis velocity  controlled by a MAG instruction. I have a virtual master axis controlling the velocity and each physical axis is controlled by a MAG instruction with a gear ratio. In my safety program I have SFX and SLS function block used to determine the safe speed limit. The  SLSLimit output of the SLS function block is linked to a SS1 Request of my servo drive. This causes the axis to stop when safe speed limit acceded.  What I'd like to be able to do is to dynamically change velocity (limit it to safe speed if SLS instruction is active) of each axis without having to change the gearing ratios and thus avoid the SS1 safe stop action.  I know how to do that using JOG or MOVE but is it even possible to do that using the MAG instruction? Regards Martin
  10. Hello, In my ladder program I have 7 different arrays (containing REAL values) all members of a structure and I wish to extract certain values from the arrays and put them on another structure consisting of REAL values (not arrays). Which is the best way to do that ? I tried AryMove command but I get an error "Conversion from REAL to ANY_ELEMENTARY[], ENUM[], STRUCT[] is impossible. To get a better understanding of my structures and arrays here is an example: Struct wheel_data Global variable SWheel of wheel_data rad[1...10] of real, vary[1...10] of real, varx[1...10] of real struct. 2 wheel Global variable Wheel1, .... , wheel10 of wheel rad REAL, vary REAL, varx REAL what I wish to do is to copy Swheel.rad[1]  to wheel1.rad,  Swheel.vary[1] to wheel1.vary, Swheel.varx[1] to wheel1.varx 2nd structure Swheel.rad[2]  to wheel2.rad,  Swheel.vary[2] to wheel2.vary, Swheel.varx[2] to wheel2.varx until I fill all 10 wheel structure instances with values Thanks in advance.
  11. Is it possible to reset " Motor replacement detected error" ( Error code 95.01) using code without connecting to PLC through sysmac studio? If yes please suggest how to do it... Thanks in advance...
  12. Hi all, I've ran into an unusual situation where I could use some suggestions.  I have an AB PLC working in the field, and an existing fixture that needs to be transferred from an Omron PLC into our AB.  I have an integrator who did some offline development with a welder that uses Anybus communication.  He sent a .ACD file to implement the logic from.  The file has an Ethernet module configured but more importantly, it's showing EDS not registered.  I've asked for the EDS he used, and none of them work when trying to register it via right-click and register.  I can export the module, but it won't import into the current PLC program because there's no EDS (shows EDS error after the import).  If I try to take the program that was sent to me online with the PLC, it will automatically upload and overwrite the build.  I can't even open the properties of the module to see what the integrator did. The end goal is to have the offline developed module implemented into the current program, but it seems like everything I've tried to do has me against a wall.  Is there a way to go online without uploading?  Maybe there's a way to implement this I haven't learned yet?  Any suggestions would be much appreciated, and if more information is needed, I'll be glad to provide it. More info:    PLC Type: 1756-L82E ControlLogix 5580    Rev: 30.014    Studio 5000 Version 30.01.00 - Standard Thanks, K
  13. I have been able to Jog the opposite direction from a Hardware OT with my 1S servos (using Sysmac Studio).  I reset the OT Fault and Job the opposite direction. What I am having trouble with now is, I have set Software Limits and I cannot Jog off like I can with the Hardware OT.  I have been told I should be able to do that, but it still does not work.  The fault returns immediately when I press the appropriate HMI Job button....which is the same HMI buttons and Logic used when I have the Hardware OT. Has anyone ran into this before?  It may be a setting I have not done right maybe?? Thanks,
  14. I am using a Label as a Message Display with Resource Group.  I want to do the same thing with my User Alarms, I do not like the Alarm View Popup.....The image is how I assume it needs to be setup.  It compiles and downloads without fault, but messages do not display. Any thoughts on what I am doing wrong?  I could retype all the User Alarms in a Message Resource folder, but I have a lot of User Alarms.... Thanks,
  15. Hi, Could anyone help me out on how to extract the digits present in a string in sysmac studio... Thanks in advance !!!
  16. I have done some digging and cannot find an alternative.  I need a Multi-State Indicator for my NA-Series HMI that functions like the "Data Lamp".  I do not like the "Data Lamp" because of the darker shade to the color scheme.  Does anyone know of an alternative?  I know I can simply use several "Labels" of different text/color and then only make "visible" the state I want the operator to see...…. Thanks,
  17. Anyone know of a guide about programming a balluff io master device into Sysmac Studio?
  18. I am in desperation.....I had a Recipe setup made for my NA-Series HMI using Sysmac Studio.  It WAS working until I decided I wanted the name of the Recipe to be something different.  After I compiled the HMI, I got several errors referring to the new name of the Recipe file.  I remembered that there was some background code that had the old name in it so I went there and changed all the statements to the new name....still no luck. I changed the Recipe name back and changed all the background code statements back to the old name....and I still get the faults.... What have I done and how do I fix it?  I am desperate to fix it as I have customers on Wednesday morning :? Thanks,
  19. Version 4

    23 downloads

    MX Component manual for programming PC - PLC software solutions.   Details MX Component library functions and examples. 
  20. MX Component Programming Manual View File MX Component manual for programming PC - PLC software solutions.   Details MX Component library functions and examples.  Submitter WattUp Submitted 03/13/20 Category Manuals, Tutorials
  21. In CX-Programmer software, we have the ability to make a bunch of copies of the same rung with the "Address Incrememntial Copy" Function. Does Sysmac Studio have a similar function?
  22. Still learning Sysmac Studio......how do I gain access to System Variables like 'PageIndex" so my PLC can be notified what Page the HMI is on?  Also, how can I execute an 'Acknowledge All' from the PLC so I can reset the 'Alarm Viewer Popup' from my PLC? Thanks,
  23. A simple request for an Omron novice.  I know Timer values in Sysmac Studio are classified as TIME variables.  How can I modify the Preset of a TON block from my NA HMI since the TON Preset is of a TIME data type? Thanks,
  24. PWM

    Hi  In CX-programmer there is a PWM(891) function. Is there a similar same function block in sysmac studio ?  
  25. I don't suppose there is anyway to modify the popup Alarm Notification?  I know you can press the Acknowledge and get it to clear...most of the time, but it always seems to be right in the way when it does pop up.  I can move visual data to a different part of the screen that I want to see when an Alarm appears, but I'd rather be able to move the Alarm Popup or Resize it all together....   Thanks,