Search the Community
Showing results for tags 'sysmac studi'.
Found 191 results
-
Setting the NB Clock based on the NJ NX Clock
Michael Walsh posted a file in Tutorials and Quickstarts
-
How we can connect MPG with omron NX SERIES CONTROLLER. PLEASE HEALP
- 6 replies
-
- omron sysmac
- omron nx
-
(and 1 more)
Tagged with:
-
Does anyone have any idea how I can create a Data History though the NA screen. I know I can do a Data Log with a Data Set then use a Trend Graph but, I want to create the "Table Like" Data History found in the Omron NB screen. I use data histories for a UI to an operator to review previous Cycle Times, Poka Yoke values, and Temperatures monitoring with a time stamp as to when the data was recorded. Any ideas? I am using a NX102-9020 NA5 Screen
-
Copy array element to member of a structure
Famous_Fella posted a topic in NJ Series / Sysmac Studio
Hello, In my ladder program I have 7 different arrays (containing REAL values) all members of a structure and I wish to extract certain values from the arrays and put them on another structure consisting of REAL values (not arrays). Which is the best way to do that ? I tried AryMove command but I get an error "Conversion from REAL to ANY_ELEMENTARY[], ENUM[], STRUCT[] is impossible. To get a better understanding of my structures and arrays here is an example: Struct wheel_data Global variable SWheel of wheel_data rad[1...10] of real, vary[1...10] of real, varx[1...10] of real struct. 2 wheel Global variable Wheel1, .... , wheel10 of wheel rad REAL, vary REAL, varx REAL what I wish to do is to copy Swheel.rad[1] to wheel1.rad, Swheel.vary[1] to wheel1.vary, Swheel.varx[1] to wheel1.varx 2nd structure Swheel.rad[2] to wheel2.rad, Swheel.vary[2] to wheel2.vary, Swheel.varx[2] to wheel2.varx until I fill all 10 wheel structure instances with values Thanks in advance.- 2 replies
-
- sysmac studio
- array
-
(and 1 more)
Tagged with:
-
I have been able to Jog the opposite direction from a Hardware OT with my 1S servos (using Sysmac Studio). I reset the OT Fault and Job the opposite direction. What I am having trouble with now is, I have set Software Limits and I cannot Jog off like I can with the Hardware OT. I have been told I should be able to do that, but it still does not work. The fault returns immediately when I press the appropriate HMI Job button....which is the same HMI buttons and Logic used when I have the Hardware OT. Has anyone ran into this before? It may be a setting I have not done right maybe?? Thanks,
-
I am using a Label as a Message Display with Resource Group. I want to do the same thing with my User Alarms, I do not like the Alarm View Popup.....The image is how I assume it needs to be setup. It compiles and downloads without fault, but messages do not display. Any thoughts on what I am doing wrong? I could retype all the User Alarms in a Message Resource folder, but I have a lot of User Alarms.... Thanks,
-
I have done some digging and cannot find an alternative. I need a Multi-State Indicator for my NA-Series HMI that functions like the "Data Lamp". I do not like the "Data Lamp" because of the darker shade to the color scheme. Does anyone know of an alternative? I know I can simply use several "Labels" of different text/color and then only make "visible" the state I want the operator to see...…. Thanks,
-
Anyone know of a guide about programming a balluff io master device into Sysmac Studio?
-
I am in desperation.....I had a Recipe setup made for my NA-Series HMI using Sysmac Studio. It WAS working until I decided I wanted the name of the Recipe to be something different. After I compiled the HMI, I got several errors referring to the new name of the Recipe file. I remembered that there was some background code that had the old name in it so I went there and changed all the statements to the new name....still no luck. I changed the Recipe name back and changed all the background code statements back to the old name....and I still get the faults.... What have I done and how do I fix it? I am desperate to fix it as I have customers on Wednesday morning :? Thanks,
-
In CX-Programmer software, we have the ability to make a bunch of copies of the same rung with the "Address Incrememntial Copy" Function. Does Sysmac Studio have a similar function?
- 1 reply
-
- sysmac studio
- cx-one
-
(and 1 more)
Tagged with:
-
Still learning Sysmac Studio......how do I gain access to System Variables like 'PageIndex" so my PLC can be notified what Page the HMI is on? Also, how can I execute an 'Acknowledge All' from the PLC so I can reset the 'Alarm Viewer Popup' from my PLC? Thanks,
-
A simple request for an Omron novice. I know Timer values in Sysmac Studio are classified as TIME variables. How can I modify the Preset of a TON block from my NA HMI since the TON Preset is of a TIME data type? Thanks,
-
Hi In CX-programmer there is a PWM(891) function. Is there a similar same function block in sysmac studio ?
-
I am trying to use the "Scroll_composition_all" IAG that I found browsing the Omron Software section...… What am supposed to put in "AlarmObjName" in Properies of my NA5 (using Sysmac Studio)?? I figured it was just a set of buttons that would control the selection bar on my Alarms Display.... Thanks,
-
EtherCAT Communications with Yaskawa SI-ES3 for A1000VFD
WKTilton posted a topic in NJ Series / Sysmac Studio
Has anyone had experience with EtherCAT Communications using Sysmac, NJ5 PLC & Yaskawa SI-ES3 EtherCAT Comms board for A1000 VFD? I have looked at the manual, but as I am still green on Sysmac & Omron programming in general.....not sure I understand what to do to simple Drive Status monitoring, Execute RUN/STOP & Speed Select... Thanks in advance :) -
Compiled my HMI file I am currently building in Sysmac Studio for my NA5-Series display. Not finished, but I executed a Build and this is what I got....I have absolutely no idea what it means...... Thanks,
-
Is there any instruction in Sysmac Studio Structure text to detect rising Edge (DIFU/DIFD) ?
-
I have made a fat bloated program that runs too slow. I tried working under the philosophy that "Premature Optimization" is the biggest time waste in developing programs. Now my program takes to long to run and throws a task error. I am attempt to cut the primary task's cycle time down I tried to move programs that use IO to other tasks. Task 16 is supposed to be able to handle IO but it doesn't come up as a selection choice of priorities for me. I can do 17 but I get errors trying to use IO variables at that priority level. NX102-1200 controller, Sysmac Studio 1.30.1. Should I be able make a task at priority 16? I have some analog IO that I don't need to update every millisecond and I have some data and loop intensive FB's that only need to run once hour and I'd like to get them off my primary task's to-do list. I'll be busy re-writing my program FB's to accept specific variables instead of bloated structured variables and converting and changing Lreal's to real's and some other Premature Optimization tasks so I can run the sucker.
-
I am new to Omron Programming, Sysmac Studio NJ processor & NA hmi. I am used to being able to create diagnostic PLC logic using BIT addressing from a DINT variable for setting diagnostic signals for an HMI. I can also use the DINT to do a quick check to see if it is greater than 0, therefore signaling I have a Machine Fault. I cannot seem to figure out a way to get those BITS setup in the User Alarms of the NA programming. I have found where you can setup a Datatype/Union to be able to use the DINT scenario and Bit level in PLC programming....but that doesn't help on the HMI side. Any thoughts??
-
I need to write c# with modbus TCP to read NJ, Anyone able to to use PC communicate with NJ by using Modbus TCP? Any Function need to be added in the PLC, for Example , PC to read Register 40000 to 40020 ?
-
hi dears, I have one CS1D omron Redundant controller ( CP65H) that must be connected to NS15 Touch panel. I want to use Ethernet for connecting HMI and CPUs (CS1D-ETN21D). I have one question. for NS15 we can use CX designer and sysmac studio? is it true? which one is better? what is your recommendation for HMI software? Thanks.
-
How do I edit an array size ARRAY[0..13] OF REAL to ARRAY[0..15] OF REAL? Sysmac Studio doesn't allow it to be done online, as far as I can see. If I do it offline and then go online and Synchronise, Transfer to Controller I receive error Any ideas?
-
Trying to connect our old Sysmac C200HE PLC to the CX-Programmer software however, failed connection appears. We are using a USB-Serial connection and have set up the comms on the device manager. To try and connect to the PLC we are using the Auto connect function, selecting the usb-serial connection and selecting the comms the same as the host network. Any help would be greatly appreciated.
-
Hey guys I have searched the forum, but can not find the answer I am looking for. I have an Omron Nx102-9000 along with an NA5 (9 ") that I use to control an industrial furnace. I need to set an output one at a given time (date and time) A time that should be able to specified from day to day via the HMI Is there anyone who can help me? Then I would really appreciate it
-
Good morning, I am working with sysmac studio v1.25 controller NX1P2 and HMI NA5. I have been trying to link and modify members of an structure in HMI without success and I don't know if i'm missing some syntax or if it is even possible what I am trying to do. 1. In the PLC I have the struct "Formato" and global variable "Formatos" which is an array of Formato. 2. I have mapped this variable to the NA5 so I can use the same data type. 3. I am trying to give a value to the members of my struct with a recipe of the HMI. I am trying with different syntax, with AT connection, without AT connection and none is working for me. Is it possible what I am trying to do? Thanks very much in advance,