Search the Community

Showing results for tags 'symbol editor'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 14 results

  1. Dear all schneider Experts, anyone having "Vijeo designer screen editor"Software for XBT012110 megelis HMI. Please give a download link, I got very  stuck  to get this software #Advanced Thanking you......
  2. Hi, I'm using EA9 Software with a C-More HMI. I made 4 symbols in MS Paint then imported them as BMP's into the Symbol Factory. All 4 of them have bright yellow backgrounds. When I added them to my project (as animated Bitmaps), I selected the bright yellow color as my transparency color. When viewing the added bitmaps in the C-More Programming Software , they all appear transparent (as they should). HOWEVER.... Once I download and run my project, 2 out of the 4 lose their transparency and show up with the bright yellow background. Is this a known issue? Is there a fix, or workaround? Thanks in advance.
  3. Hello to All, I've installed the Sysmac software and the installation works fine, until I tried the ladder programming.  The % symbol is not working when I tried to use the internal memory addressing.  All I can use is the # symbol only.   I already looked into the options, to check if there are options to be selected to activate the % symbol, but unfortunately, there is none. Anybody who have experience this issue before? Or Is there any options / selections to be tick off during initial installation, that I have missed? Thanks for any suggestions / solutions. Regards. Leo
  4. CX-Supervisor 3.4.1

    Hi After updating CXS to ver. 3.4.1 I can't see point address I can see them when I editing but in the list form only the array len. is shown. When I enter a new point I can see the address. Anybody now hove to solve that ? Banker
  5. CP1L connected with scanner symbol DS-4308 reading 2D data matrix,  with RS-232 on board CP1W-CIF01 Hi all, need some help because I can't read the information. Let me explain, I have a PLC, " CP1L-L14DR-D " with a RS-232 option borad " CP1W-CIF01 " , a scanner Symbol DS-4308, and I'm trying to read a data matrix 2d barcode (I don't know if that matters). so I build a cable with the next configuration, (one side male and the other female) PORT CONFIG PIN OUT SCANNER CABLE RJ-50 TO RS-232 PINOUT Maybe I'm missing a connection? a bridge? power supply ? ground?   in the program, I only have this to check the communication,       When my reception flag complete (A392.06), my instruction RXD is going to execcute, reading in D1500 the data. if is any error in communication (A392.04) or overflow (A392.07), my port is going to restart (A526.00) (ignore w0.03) with the followign config: (9600, 7,2,E, RS-232C, End code: Received Bytes 3       and I'm reading only, data on D1500 and D1501, and the data makes no sense.   with the configuration of End Code: CR, LF,          can't make it work, I read nothing. and if I change the END CODE: Received bytes to 4,      don't work. and my flag A392.04 go to ON.   PLC HAS 4 PIN SWITCH, ALL ARE OFF The configuration on the scanner is setting to default and then config to RS-232 Standard.   So, what I'm missing?  bad connections? plc don't support? scanner config? program?      
  6. GOT-Barcode reader

    Dear everyone, I would like connect Bar-code Reader to GOT that read Bar-code to input data on GOT 1575 VNTB Note: Barcode Reader is symbol model & I have use Power electric 5V to nourish And, I would like confirm that have conflict reverse electric  from Bar-code Reader to GOT or not? Thanks so much
  7. I have recently come across a free virtual plc simulator called PLC Fiddle. It will enable you to create simple PLC ladder logic code within your browser. This is an ideal way in understanding PLC concepts for industrial automation. All of the basic PLC instructions that come with most plc units have been incorporated in this virtual PLC software.PLC Fiddle is currently in an early stage of development but is functional enough to be helpful to you in learning and understanding PLC concepts.  http://accautomation.ca/plc-fiddle-online-editor-and-simulator-in-your-browser/ YouTube Video: https://youtu.be/G43ZLOwu2dM www.plcfiddle.com Let me know what you think of this for a learning tool. Thanks, Garry
  8. Hello All,   I really need help with a full version software of DM value editor for Keyence PLC. All the ones I have found dont seem to work or might be virus.... All help will be really appriciated! Thanks
  9. I want the older screen editor version of delta HMI( Version V1.05.81). I think this is the only Version in which Delta DOP-AS57CSTD Model is present.  
  10. I am using PG5 v2.1.310 and Web Editor 8. I am trying to implement user access on my project. I have created a login page, made it as the default page, put the logon component on the page and also added a user to the project. The page loads without any issues, but nothing happens when I enter the username and password. I read the help, and I don't think I have missed anything. Any ideas? Thanks, Csongor
  11. Expressions

    Hi forum members!   I am spinning the wheels on trying to get my expression to validate.  I am new to expressions so after trying for a bit I have thrown in the towel and am looking to the experts here to help me out. As you can see with attachment I am trying to change the color of the valve top hat.  I am needing 3 colors: Gray when closed, Green when open and in Auto, and Yellow when open and in Manual. I was asked to not change the PLC logic as this could be done from the SCADA level.. After looking at my application and attempt do you have any suggestions on what I am doing wrong?    My Expression:  If {::[Process]Program:Boilers_Main.LV_36101_New} < 3  Then 0  Else  If {::[Process]Program:Boilers_Main.LV_36101_New} >= 3  AND {[Process]LIC_36101A_PIDE.Auto}  Then 1  Else  Then  If {[Process]LIC_36101A_PIDE.manual}  Then 2
  12. Symbol editore doesn't exist

    Hi there, I'm just a beginner in PLC programing and I'm just installed siemens step7 latest version on my laptop... but I have an issue with this program after I created rack and insert my ps, cpu and DI/DO modules... when I want start insert Symbol tables; this symbol editor doesn't exist under option tab... so for now what can I do with this, maybe sth changed in this version, I don't know...  how can I fix this problem??     Thanks.
  13. For some reason, some of the symbol names and comments in my symbol table in my project have disappeared. They are present in a previous version of my project. I would like to copy the symbol table from the old project version into the new project version. Can I do this by simply copying a few files from the old project folder into the new project folder? Which ones?
  14. I have a list of 100 faults for my machine. Each fault has an integer variable in the symbol table, containing an integer that matches its position in the list. Say I then want to add a fault in at position 12, I would then have to renumber all the following faults. Is there a built in way to do this automatically? Alternatively, if you have any other suggestions for achieving a similar thing, I would love hear them.