Search the Community
Showing results for tags 'support'.
Found 17 results
-
I have been trying to connect to my nt21 hmi and I keep getting timeout error. I am able to connect to the plc with the same driver. So I know my cable is connected fine. I set the settings of the driver to match the hmi settings and still times out. Can someone please share the steps to take to send an application to this hmi?
-
I have been trying to connect to my nt21 hmi and I keep getting timeout error. I am able to connect to the plc with the same driver. So I know my cable is connected fine. I set the settings of the driver to match the hmi settings and still times out. Can someone please share the steps to take to send an application to this hmi?
-
Hi guys, I need to upload an NT31-123B-EV3 IHM (System Ver 4.2), but the software I have installed is NT Support Tool Ver 4.87, does not include the PT model I need (System Ver 4.2), has only NT31-V2 / V3 (System Ver 3.1 / 4.1). Does anyone have a solution to this problem? obs: * HMI: NT31-ST123B-EV3 (System Ver. 4.2) * Software: NT Support Tool Ver 4.87 Best Regards,
-
-
NT Support Tool 4.87E View File NT Support Tool 4.87E The registry fix included needs to be manually executed and will add Omron PT models with system versions 3.2/4.2 Submitter photovoltaic Submitted 10/14/22 Category Omron
-
I am trying to get a NT 21 to link to a CPL1 I have both set to Host link 9600/7e2 I have it set to read a DM All I get is system initialzing I am using the same cable i used to build the screens with NT Series Support tool I sent and recieved the screens so the cable works The com port on thee PLC is flashing I have tried starting the PLC in run mode and Monitor Mode What did i forget to do ??????? Rob
-
Hi Everyone, I have NT31C-ST142-V2 and it has a prompt of "System Program not exist or incorrect." I am trying to transfer via NT Series System Installer but I am getting a time-out error. I have Xm2S-09 serial cable with ATEN serial-to-USB cable.I know it is not broken since I can still Upload/download on a CJ2 PLC. I just want to know what other things I can do upload a systemprogram. I have seen a comment on this site that he remove the battery then tried to upload again. NT is almost 15 years old. I have a back-up program. I can't seem to upload by this time for pictures of theH MI and the screenshots of software .
- 4 replies
-
- nt31c
- nt-series support tool
-
(and 1 more)
Tagged with:
-
I have an issue with a servo drive MR-J4-70A from Mitsubishi, the thing is that it was running okay, but after a shut down it started to display an error and stop, the error displays is "AL 30.1", I reset it but it display the error y stop again, so in this case I would like to know what could be the problem. thank you in advance.
-
I have an issue with a servo drive MR-J4-70A from Mitsubishi, the thing is that it was running okay, but after a shut down it started to display an error and stop, the error displays is "AL 30.1", I reset it but it display the error y stop again, so in this case I would like to know what could be the problem. thank you in advance.
-
What is the procedure to change Gmail ID on the phone?
greythomas73 posted a topic in General Topics - The Lounge
If it is about changing Gmail ID on phone it is advisable to open the device settings application further at the top the user should click the personal information account then under the “Profile” or “contact info” the user should make the necessary changes. If you are still looking or searching for more information than in that case it is advisable that the user gets connected with the certified Gmail technicians. Lines are open for help and support all the time there is no such issue that cannot be resolved by the Gmail technical team.-
- gmail contact number
- gmail support number
- (and 2 more)
-
Good Evening everyone, I do realise that this has possibly been done before but quite a few years ago and the links no longer seem to work or links to Mitsi pages that are in Japanese, so please excuse me. I have soem A series PLC kit that needs replacing and I have bought all new Q series stuff to replace(where possible). I have been languishing a little on this project now for a few months but need to get moving. I purchased a GOT HMI and got a good deal on the HMI and the complete Mitsubishi Software Suite the local Mitsi guru said that was all I needed to get the job done. But afetr delving into what came inthe box it seems I need a A - Q Conversion Support Tool https://www.mitsubishielectric.com/fa/products/cnt/plca/pmerit/renewal/case/support_tool.html However I cannot find the software on any of the DVD's that I have and I cannot seem to find a download. So I am stuck now. Can anyone help point me in the right directon? Any Help greatly appreceiated. Thanks in advance.
-
CompactLogix E/IP to Kuka KRC 4
Ricardo Vargas posted a topic in Allen Bradley / Rockwell Automation
Hello everyone, I need to communicate a CompactLogix to a Kuka KRC 4 by Ethernet/IP but I do not know to generate the EDS file..... any clue please ?-
- compactlogix
- kuka
- (and 11 more)
-
How to conduct a Change or a reset of Gmail Password?
Miley272 posted a topic in Computer Help and Networking
In order to conduct a change or a reset of the password, the user should follow the given steps- • Open your Google account in order to sign in. • Then under the security section select signing into Google. • Then select a password as you will have to sign in again. • Then in the field enter your new password and then click on “change password” and if you need any sort of further help connect at Gmail Support Number UK- 1 reply
-
- gmail support number uk
- gmail contact number uk
- (and 3 more)
-
Why am I receiving a Gmail verification code without requesting for it? There can be multiple reasons for you receiving a verification code without requesting for it there is a possibility that someone who knows your Gmail ID is trying to get an access to your Gmail account or if you are trying to log in your account with a new or an unauthorized access, Google will always send you a verification code if you will open your account on a device on which you have never opened it before you will also receive verification code whenever you will enable 2 step verification for your Gmail account.
-
- gmail helpline number uk
- gmail support number uk
- (and 1 more)
-
Good day, I am trying to upload a programme to a Omron NT600S HMI, can anyone advise or help me with the right support tool software that I need. Thank you
- 1 reply
-
- support tool
- nt support tool 4.7
-
(and 2 more)
Tagged with:
-
I am told that Rockwell A B offers software to allow a laptop to hook up to a 700 drive and review the parameter. Does anyone have a link to the page or can point me into the right direction. I have an application where the end user would like to access the list via laptop and make changes if necessary Frank
-
Hello every one.I am a new to this field. i uploaded a program form Omron NT31c-V2 using nt support tool and I want to download it to Nt31c-v1. Do i need some converter to Converet Nt31c-v2 program to Nt31c-V1 ? I would also like to ask that it is possible to convert the program to other Nt series model like Nt31, Nt30 and other if program memory is compatible.Plz reply.Thanx