Search the Community

Showing results for tags 'string data type'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 116 results

  1. Hi, I have inserted new RTD module into in my SLC500 as replacement to defected RTD module however the module LED is enabled but the channel LED's are blinking. I have checked the following: In the advanced I/O configuration the module configuration is shown as expected In the data file word format it is not corresponding to the channel preferences What should I do and how to fix the word bits?        
  2. Open data log in HMI

    Hi there! I have S7-1200 controller connected to a Comfort Panel. The machine has some pressure and temp sensors, as long as many valves and other stuff. I generate a daily datalog with some of those variables but, the thing is, I've been trying to figure out how to show these data in the HMI without using a trend viewer. I don't know if it's possible, but I want to be able to see what valves were open (for example) the day DD/MM/YYYY at HH:MM:SS, using the generated data log, kind of knowing the state of single bits at different past moments. I've been searching the web but I didn't find something exactly like this, don't know if I'm doing it properly so I'd like to know if you have done this or you can throw some light on the topic. Thanks in advance and hope you can help me!
  3. How to open .ecx type files

    How to open .ecx type files. Diagnostic data of the Control logix CPU's
  4. Have been able to exchange data types of BOOL, INT,  DINT & REAL between Omron NJ/NX CPU with Allen Bradley Logix CPU's with Ethernet/IP using the CIPUCMMRead & CIPUCMMWrite instructions. I now have a need to exchange "STRING" variable types. Have tried varions string lengths in the NJ without sucsess. AB default string length is 82 & Omron 256 but I think the difference is the length headder that AB has with within their String Tag type. I know I could convert my strings to an array of bytes & sent them this way, but was looking for a solution to sent them as native strings. Hope someone out there has done this & can share their leg work? 
  5. Hi I'm trying to set up Modbus RTU communication between FX3U PLC and a weigh module. I would use the ADPRW command using 0X03 to read the 16 bit Holding Register but in the weigh module the Data Address/Holding Register of the value I want to get is 400047 - 400048. How to translate the value in 16 bit?   Thanks, Fabio
  6. Hello all, I need to read device memory mostly I need to read R registers from PLC L26. I read device data, but inside of table, I can't find R or ZR registers. Can you help me?  What I did wrong?   BR KS  
  7. NB Data log

    Hi there!  I need to implement a data logging that saves the log in a USB storage for a machine and just started searching for some info about data logging in NB HMIs. Up to now I'm clear about using the Data History function and the sampling method I'll be using but I still have some unclarified doubts about this. 1.- The data log should sample the value of, let's say, a couple of words, each second for an entire day (6:00 am to 6:00 am). NB's manual doesn't say a lot about Storage Type and Buffer Storage in "Save Data History" tab. Does "daily file" mean It deletes the .CSV file daily and it generates a new one? If is it, at what time does this occur? Does "single file" mean it generates a file and won't get deleted? Does this mean the sampling stops when completing the first one? Is "storage period" used to keep the file after the next log begins? 2.- Is it necessary to display the element in order to make the log work? Or can it be placed in a random screen you only enter once a day? 3.- In the "Channel Properties" tab. If I need to get the binary value of a word, do I need to set the max. limit to 65535? 4.- I asume that "Sample points" value doesn't matter when selecting Continue sample mode. Am I right? Thanks in advance, any help is appreciated.  
  8. I have a function that reads ASCII code from a transducer, converts the code into characters and places the characters from the serial buffer into a string. Now, I am trying to convert the value in the string into a 64-bit float number. Any ideas on how to do that on the CCW? 
  9. Data Logging with GT Designer3

    Hello, I am trying to log data using GT Designer 3 and I'm having no luck. I found some sort of online documentation and even going through the myriad of steps still find my self unable to log anything. I am using the melsoft project navigator and GX Works 2 to simulate the logging of just one 16 bit signed word with a constant value. As logging data is clearly not as simple as just specifying D100 or D200 as the devices you want to log, I am hoping someone else on here has some experience on this matter and can help me out.  Thanks for any help in advance.
  10. Dear Friends, I have made this video to show you how to take data samples from Delta DVP PLC and save this log file in the Weintek HMI internal memory. The Weintek HMI internal memory is easily accessible using ftp. All the necessary steps are mentioned in the video. The link of the video is given below,    
  11. Hi all, I am currently having a project of polling data from PLC CJ1M using Advantech ECU-1051 IoT gateway which support rs-232 serial connection (Host Link) to poll data from the PLC for data acquisition and monitoring, I would like to use peripheral port since rs-232c port is used for HMI. However, I am currently stuck at make the connection between those two devices. I did setup same transmission configuration between them (baudrate, Unit number, start/stop bits,...). Is there any configuration that I have missed to make the communication works?  
  12. Good day everyone, before I start asking my question, just want to let you all know that my knowledge with PLC is not that good. I'm still learning on how to do it. So currently I'm working on a project that trying to obtain data from Omron PLC. I was told that I can't touch the Omron PLC program or modify it. That Omron PLC is connected in an isolated network within a router. Other than adding Network Card on the device, can I use another PLC (any brands) to get the data from that Omron PLC through the router? The communication protocol using here is Ethernet. Can i just tapped into the network and take the data with that way? Or the other method I'm thinking is that, the Omron PLC will feed the data to a server, can I just obtain that data from server by using OPCUA? I heard there's some PLC that have the OPCUA function, I just make my PLC into the cilent and request the data of that Omron PLC from server through Ethernet. Is this possible? Please let me know whether my method works or not, thanks in advance guys!
  13. I'm editing an old program for a customer that has a zillion user-defined data types. Scrolling through the list trying to find a specific type definition is taking way too long. Is there and easy way to find a specific data type definition? It would help if I knew how to collapse the view so I don't have to scroll through each member of every type. There doesn't seem to be any right-click menu items that would collapse the view.
  14. Hi! I would like to ask how could I send data from PC to CJ1M PLC, by SCU-41 module and RS232 cable, in order to activate an actuator (LED)? In my environment, I have a sensor that sends data from PLC to PC (I'm checking data, "HelloWrld" with Putty), with this configuration: And I have another section where I want to read the data from the PC in ordr to activate a LED I would like when I send for example a letter 'a' trough Putty, the LED activates. How could I do that? Thank you very much!
  15. Hello, I'm using RSLogix 500 application for LAD programming. I would like to convert the float data type to integer data type and vice versa. I tried with the COP instruction as some had mentioned in other forums, but it was not working. So any suggestions on solving that issue would be helpful.
  16. I'm working on simple structured text program which takes in DWORD values, does some math on them and then outputs in DWORD type. What data type should I be using and how can I make this work?  This is one of the lines from the code(everything DWORD) and I get 'operator not supported by DWORD data type' XPos3 := XPos1 + (2*XIncrement);  
  17. Hi, As part of developing an EtherNet/IP driver for the CLX family, I have the task of recognising tags that would ordinarily be represented as strings. With SLC/ML, that wasn't too difficult since strings were a pre-defined type found in files with a file type of 0x8d. With CLX, I understand that the situation is quite different, since a string now becomes just another structured tag like so many others. So, for instance, in my controller, and with the help of information gleaned from the LogixTagRead program, I can see that a request sent for one particular tag (which I happen to know is a string) returns me the following information: Tag type: A0 02, followed by, Structure handle: CE 0F, followed by, Length (DINT): 1A 00 00 00, followed by, Data (Series of SINT): 41 42 43 and so on through to 58 59 5A Now in one sense I am fairly clear how to interpret most of the above data -- but in another sense, I don't believe (unless I'm missing something) that it can ever tell me that this tag should be INTERPRETED as a string. What do I mean by that ? Well, the tag type of A0 02 simply says that this tag is a structure (because the top bit is set). Even if we were to unset the top bit, the value becomes 20 02 and I'm not sure if that has significance in itself. I'm not sure if the structure handle (aka template id) of CE 0F tells me anything other than the fact that this is a symbol type of CE 8F. I know that this field can be looked up and will tell me that this structure comprises a C4 (DINT) followed by data comprising a series of C2 (SINTs) where the number of SINTs is given by the value of the DINT preceding. And, of course, this makes sense in that the DINT value of 1A 00 00 00 is decimal 26, followed by 41 42 43 ... 58 59 5A which is a 26-character string ABCDEFGHIJKLMNOPQRSTUVWXYZ. This is all correct. So whilst this LOOKS like a string, how can my code be sure that it is actually to be INTERPRETED as a string ? At the end of the day, it is only a DINT followed by a series of SINT; this doesn't of itself mean it is a string. Is there anything in the tag type or structure handle which actually identifies this as a string-type tag ? Thanks.  
  18. Working with Strings

    Hi so i am learning to work with mitsubishi GX Works2 i am using the simulator, and the help anyway i was testing with strings and when i convert a unsigned word or dword to string it converts it as HEX values and also fill the whole thing with 0's can anyone help me or point me in the right direction with a manual, i do know my way around on AB and siemens but its harder to find help for mitsubishi, on the help for WORD_TO_STR, it says it should be converting to decimal but it isnt, is this a weird bug with the simulator?    
  19. Cognex Data Logging

    Anyone know how I can create a log of results from a Cognex vision system?  I have 3 cameras that look at various thinks... clip presence, clip height, clip angle.  There are 2 clips per part and 6 parts per tool.  This makes it hard to zero in on what I areas I need to tweak. Thanks! P.S. I've heard that maybe their OPC Server could do this but I don't have much experience with it (actually I don't have a whole lot of vision experience at all).  From what I've briefly read, I just install the server, set up the tag within the server, start it, and I can just drag and drop the tags into an Excell cell?  If this is true, this just gives me another way to read the values.  How can I create a database or log of these tags?
  20. Hi all, I'm enhancing an Ethernet IP driver but only just learning the ropes in terms of Allen-Bradley PLCs. I'm presently focussing on that part of the driver which specifically supports SLC/500 & MicroLogix 1400, for which I have one controller of each type for testing purposes. I can already cater for a range of standard file types: integer, float, binary, input, output, string, counter, timer, control, status, and this is working well. However, by working with RSLogix500, I can see that there are other data file types which can be hosted in these controller types (dependent on model) and, indeed for test purposes, I have actually created instances of them as follows: ASCII (at A21, 20 elements) for both SLC & ML1400 Long (at L22, 10 elements) for ML1400 Message (at MG23, 8 elements) for ML1400 PID (at PD24, 4 elements) for ML1400 Programmable Limit Switch (at PLS25, 3 elements) for ML1400 Routing Info (at RI26, 3 elements) for ML1400 Extended Routing Info (at RIX27, 3 elements) for ML1400 Now, the driver obviously uses standard DF1 PCCC data types (see below) to read/write individual elements/sub-elements of the file types that I can already support -- and I can see that there's a file type listed below for ASCII. •80 to 83 hex: reserved •84 hex: status •85 hex: bit •86 hex: timer •87 hex: counter •88 hex: control •89 hex: integer •8A hex: floating point •8B hex: output logical by slot •8C hex: input logical by slot •8D hex: string •8E hex: ASCII •8F hex: BCD However, my question is this: since there are no hex file types corresponding to non-elementary data types such as L, MG, PID, PLS, RI and RIX, what file type do I specify in my DF1 PCCC packets to read/write the elements/sub-elements of these six data types ? Thanks in advance.
  21. Data entered into the PLC D memory table does not end up in the instructions and I'm not sure what I'm doing wrong. For instance I want to use the CP1W-DAM01 to change a duration value. I have a symbol setup using the corresponding address setup so that it ties in with my timer but the data does not transfer even thought the value shows up in the table. I'm also using it for parameters on a scale instruction, same issue. Any ideas.
  22. Hi guys, Is it possible to convert integers to/from strings in scripts in GT Designer3? I don't want to perform the conversion in the PLC. Thanks,
  23. i have a third party OPC server transmitting data to 1756-L73-A17 to controller derived tags that i have created in the PLC. all of these tags are working great and retriveving the raw data from the OPC. i have one tag Titled CNA_Last_Measurement_Date_Time, this raw data transmits in the form as the raw data of 43865.7090393519, but i need it to be displayed as 02/10/2020 07:05:39. i have researched all over to find a way to do this either in the PLC or on the HMI and have not found a way to convert the Datevalue numer to a date time format.  this tag changes/updates based on the last CNA measurement that was taken. does any one have a way to accomplish this via the PLC or The HMI?
  24. I am working on  calculating a checksum value for a command that is to be sent from an Allen-Bradley CompactLogix PLC to a Mass flow controller. An example of a command is the following: "@@@022SX!20.00;CHECKSUM".  1. The checksum is the sum of every characters' ASCII code value (starting from character 3).  2.Then this sum (which would be in decimal format) has to be converted to HexaDecimal 3. Finally, the last two characters of the result have to be extracted and that would be the value of the checksum.  (For Ex: the value of every individual characters' ASCII code (starting from point 3) of the above command is 715. in HexaDecimal, 715 = 2CB. So , the value of the checksum for this command would be 2CB) I got to the point where i found the sum of ASCII code. Any idea on how to convert that to  a HexaDecimal and then convert that HexaDecimal to a string so that I could concatenate it to the command string??   
  25. TIA Portal V13- Alarm for Bool Data type

    IN TIA Portal V13 HMI Alarm Setup, Discrete Alarm Not allowing Bool Tags in "Tag Trigger". Please help how to set Bool Alarms?