Search the Community

Showing results for tags 'speed control'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 138 results

  1. Hello,I am sizing a feeder circuit for a panel according to UL 508A and came into a question:My input current is of 76.5 A (considering all the loads), thus, it is fine for me to use a cable of 4 AWG (max. 85A @ 75 c).For the circuit breaker I did 76.5 A x 1.25 = 96 A and then I selected a breaker of 100A.My question is: Is it ok for me to keep this configuration according to UL 508A? 100A breaker + 4 AWG load side cableOr do I need to level up the cables?Thank you very much in advance!
  2. Mitsubishi FX2N, Servo Output problem

    Hello guys, I am facing a problem that our Servo is generating output for only reverse direction, when we give forward command from HMI the output Y0 is active but when we give reverse command same outut Y0 is high, other output which is Y4 is not high, what could be te possible reasion.
  3. Mitsubishi FX2N, Servo Output problem

    Hello guys, I am facing a problem that our Servo is generating output for only reverse direction, when we give forward command from HMI the output Y0 is active but when we give reverse command same outut Y0 is high, other output which is Y4 is not high, what could be te possible reasion.
  4. There have been many good discussions on the applicability of cloud-based solutions for manufacturing and process control systems. On one side, some people have concerns regarding security and control of the information, on the other side, there are identified benefits enabled by cloud systems. From VMS minicomputers to DOS and Windows, from ArcNet to Ethernet, it is inevitable the industrial automation systems shall adopt the technologies that are getting predominant in IT general use; the current environment that I am calling the “Cloud-iPad era” is no different; therefore the practical discussion is not if those new technologies will be applied in the industrial environment, but how. This paper is not intended to join the conceptual discussion about the cloud, but just to present a few simple practical examples, where cloud technologies are already enhancing industrial automation solutions and enabling new business opportunities. CloudPracticalApplications.pdf
  5. Hello      I have a cj2m processor and md211 module and I want to read position from rotary encoders who are put on the stepper motors. I use high speed counters to count the number of(I made settings like in documentation) but every time I read velocity.   In first two picture I have 3 blocks for PRV function , I set port specifier [#0, #1 and #3] because on this ports I command 3 axis. Please help me!              
  6. Flexible Sequence Control

    Hi everyone, I need an idea to make my program flexible. For example i have 3 functions; FC A, FC B and FC C. Before this the sequence of my program is A then B and lastly C. Now i want it to be flexible which I can choose the sequence first before starting the process. Please help me.  
  7. Cloud computing is a core component of the industrial Internet, and enabling devices to implement cloud management is an inevitable trend in the development of modern industry.   Haiwell Cloud BOX is a powerful and low-cost "Haiwell Cloud HMI without screen" created by Haiwell company after a lot of market research and engineering tests, which combines Haiwell engineers' excellent experience in Internet innovation technology and responds to the market demand of industry 4.0.     What is the cloud box? What powerful features does it have? ●  Built-in Haiwell cloud engine, integrated Haiwell cloud service, support cloud/mobile access control ●  Integrated HMI function, which can directly monitor the display screen through the mobile phone/PC instead of the HMI screen. The control is flexible and convenient. ●  Support A/B Key security mechanism, multi-unit network, database, multi-screen interaction, cloud camera remote monitoring,etc. ●  Support Haiwell Could SCADA cloud configuration software ●  Two Ethernet interfaces support star, tree, and bus Ethernet networking ●  Support MQTT protocol, support access to database server, easily realize data collection and reporting, connect to ERP/MES and other systems.         Haiwell Cloud BOX is a small, versatile and cost-effective " Cloud HMI without screen". Next, we will introduce how Haiwell Cloud BOX realize the Industry 4.0 Smart Factory solution. The above picture shows the device distributed in Beijing, Shanghai, Xiamen, New York and other places around the world. The remote monitoring of mobile APP and cloud website can be easily realized through Haiwell cloud platform, and remote PLC, HMI, CBOX and IPC projects can be upload and download remotely. The device supports the cloud alarm function, which can receive the alarm push information at the first time of the mobile APP or website if the field device has an alarm message,support cloud map, device location distribution can be viewed directly.   Smart Factory focuses on data integration in different places and realize unified monitoring and management. All cloud devices of Haiwell support MQTT protocol, and transmits it to the MQTT server via the Internet. The remote center database stores the sent data for ERP and MES system calls.   Smart factories value centralized monitoring and display. Haiwell cloud camera can easily realize remote monitoring of video; large screen controller TVBox can realize single screen and multi-screen in one display, and then display the screen and video monitoring of various places on the big screen through the Haiwell cloud platform to realize large screen electronic board function.   Smart factory focus on the secondary development of data variables in different places . Haiwell cloud configuration software can flexibly call variable data of devices in different places through the cloud platform to conduct secondary development configuration, making network monitoring more convenient for engineers.   The above is the introduction of Haiwell Smart Factory solutions, please look forward to more solutions of Haiwell industry 4.0 and intelligent manufacturing !   For more details, please refer to our company webstie:  http://en.haiwell.com/news/722-en.html My Wechat/ Whatsapp:  0086 15880530763  
  8. Hello - Not sure if this is the right place, I apologize if not. Just let me know if I need to move it and can delete and do so. But I am currently working on a project where I am collecting seeds (flower seeds, etc.) and when a certain weight limit is met I'll be turning off a vibratory bowl and opening a chute, etc. Looking for some ideas on the scale and how to do that process in particular. The smallest collection weight will be around 100mg, largest around 8g.  Mainly looking for ideas on the scale.  Thanks for any help/tips, much appreciate.
  9. Hello Everyone, We made a video about the simple explanation of the settings of the abb acq580 driver in the stage of water level control in multi-motor dirty and clean water cycle systems using the automatic commissioning feature of the ABB ACQ580 driver. Your comments and feedbacks are very important for us.  Video: Youtube            https://www.youtube.com/watch?v=JANGnykYYyw (For those who can't see the link) The video in our language(Turkish) but we put english subtitles. If you got any question, feel free to ask.  Thank you.
  10. hallo everyone ...i use mitsubishi Q00UJCPU and QD77MS2.. i try to make a speed control program and the speed wants to be changed during servo operating, i use dedicated instructions ZP. PSTRT1 (axis 1) and have tryed but it was only successful to change speed with "change speed control" function once ... is it like it? cannot change "change speed control" many times when servo operations?
  11. Good Evening, wanted to introduce myself. I've been in the Electrical, Instrumentation and Controls field for 25 years. I'm looking for opportunities to build control panels, any info will help.
  12. Hello - I've recently started my adventure into PLC programming and I've found this site to be very helpful. I took on a project that requires control of a cylinder - the short and skinny is that the cylinder will have to provide position feedback and stroke to various set lengths determined by position of a selector switch. So - If position 1 is selected, the cylinder will stroke 20"inches. If Position 2 is selected, cylinder will stroke to 25"inches - so on and so on.   My questions is how to best go about this process. I may be having a brain-block and not viewing this clearly, but something is not clicking for me and wanted some advice. Planned on using Allen-Bradley's Micro850 PLC (had one on the shelf, and CCW software is free so why not). Thanks
  13. PLC Mitsubishi High Speed Counting

    Dear friends, I want to calculate the flow with the help of a flow sensor that has 650 pulses per litre. My question is that can i do that with the help of plc FX1N ? can plc count such fast pulses and how .. need some help
  14. About InverterRefresh

    Hı guys,  I will design new project  but I dont know that how can ı use  FB  at the   attachmend files ı wanna send   speed  referances  for 23 motors with rs 485  I will not use   start and stop  function  for ınverters with modbus   ıt  will be doing   probably  only speeds of the motors     1 )  Plc CP1EN40S DT1D     2)   hmı : nb7 twb0        3  ınverter s  :  V1000   VZABOP4BAA how can ı use registers numbers of the ınverters so ı need simple program    thanks for  everythings [767]InverterRefresh.zip
  15. High-Speed Counter Input

    Hi, I working on reading impulse from the input. I am using M8000 as a contact, on the coil [C235 K9999] and it is working fine on the lad, but the problem is I need to applicate sth like that in structure ladder but I dont know how. I found function on the image below but it is for FX3U. I know that 2-phase 2-count input use OUT_C(for example EN True| CCoil CC251| CValue K0) and then DMOV(for example EN True| s CN251| d D100), so is there any method to read impulses from the input? .Thanks in advance. PS I have Mitsubishi FX3G series.  
  16.  Hi all. I have a question about how to set up the motor in rotary mode. My application will be a basic rotary table driven by a servo motor without gearbox between. So, in my servo drive axis settings, I select the motor as a rotary mode. then I defined the maximum position setting value for 360 degrees, and minimum to 0. So far so good. But the problem comes when I want to make an absolute move using the mc_moveAbsolute to move 360 degrees. Whit this settings the error "target position settings out of range " will come up. So, what is the solution to rotate 360 degrees without generating this error? if I set up the maximum value to 361 degrees and then if I rotate 360 the error will not occur and the motor will rotate 360 degrees as I aspected, but it's this correct ? or there is another way to do it? Thanks  
  17. Omron Servo Encoder

    Hello All  I am new to PLC programming , i have a question regarding omron PLC and High speed counters. I am using Cp1H-XA model plc . I connected HSC port 0 with a encoder and i was able to get the speed of the encoder using PRV2 instruction. Now i am trying to connect the second  encoder from the servo motor that i am using to HSC port 1. I am getting the PV signal using PRV instruction . Is there a way to calculate the speed of the servo encoder connected the HSC port 1 using PRV command , since i can't use the PRV2 command for the servo encoder .   Thanks in advance .
  18. Hi Guys!   There is a task. I have a motor, and I can monitoring the actual speed. The question is how can I to determine the average speed, if I know just the actual speed. If the speed is zero, it must be ignored. So I have to measure when the motor moves. Anybody have any idea? How can I solve this problem. RSLogix 5000.  Thank you.  
  19. Hello Everyone I have a problem to connect FX5U with Inverter Mitsubishi D700. ( no  respond from inverter) . I did read and following the manual. Could any one can help me?
  20. I am using NB Designer for last one year without problems. But from last week i am getting new error Background PLC control recorder 0 error! while compiling and not able to update the HMI. Please help.
  21. Hello, I am quite a newbie in PLC programming. I am trying to add a PID control function into a ladder program of FX3U PLC that was made by the person before me who used GX developer. I have read the manual, but still not sure if I understand it correctly or not. Please help me with questions below: 1. For parameters [S3]+1, how do I set the bit value? My understanding is that I need to align the bits I want, and then convert to Decimal number to set it, is this correct? i.e. If I need bit to be 0100001, do I set the parameter to 33? 2. How do I know if I am doing backward or forward operation? I think what I am doing is feedback control loop, does this mean it is a backward operation? 3. If I set auto tuning bit (parameter [S3]+1 bit#4) to 1, will this make the the program to run auto tune everytime I start the PID? 4. For parameter [S3]+22, [S3]+23 and [S3]+24, the manual said it will be occupied. Does this mean it will be preset by the program which I shouldn't mess with them? But how do I set the output upper and lower limit in [S3]+22 and [S3]+23? Also, I couldn't find any example of PID parameter setting in the manual. Not sure if I missed any important section in the manual. So please point out to me if there is any example. I also attached the manual on the PID page just for a quick reference. Thank you in advance for the help. FX3U Programming PID.pdf
  22. Good morning all, does anyone have any experience communicating to an OMNI Flow Computer through a MNET card, Im getting data back but it is not what i expected.  Should I be using Enron/Daniels? Byte Swapping? Thanks
  23. Hi , I need to read encoder value on PLC / module QD62E and those value to be seen on the HMI , can anyoune tell me how to do it in to PLC in order that encoder start counting ?
  24. Hi,  I'm new to TwinCAT 2 and i'm upgrading a long time design (hence the TwinCAT 2 reference), to read a more sensitive torque signal.  I'm using a Beckhoff CX1030 as my PLC Controller.  I needed to add 'homing' to my motor sequence and confirmed with Maxon, im using the function blocks correctly and in the correct sequence to establish my 'absolute zero'/'home' position.  The motor has an output to write to:  ControlWord, which tells the motor that the position it is sitting in is '0.'  My program compiles, it runs, it writes each function block, but it's not seeming to get back to the test run opMode, even though i tell it to and the function block performs the 'Write' function.  it's stuck at zero and not reading an analog input signal from my torque sensor.  so im getting an artificial torque reading through every test.   i think this is related to my tare motion.  I start the program, home the motor, get into profile velocity mode, tare my sensor, enter profile position mode, go back to position 0, then back to profile velocity mode, run a test, sample data, go back to 'home' or '0.'  I wonder 1st, is my variable not linked properly through the system manager?  2nd, i set a boolean variable to set the 4th bit to 1 in my control word write (setting the 4th bit high will set my current position to absolute zero), but did i not connect the program to the main sequence properly?  looking to read a valid signal again and see that my motor moves back to 'home' each time.  Do i not need to home the motor after the tare, since the tare nulls out the torque value after the tare? after this i need to program my sample period, instead of it being fixed, as it is currently written and then use my home position as my trigger to start sampling.... Beckhoff applications department is overloaded, currently and can't help and this is all beyond the knowledge of the general support line.  I've gotten fairly far, on my own, but of course, the project is under a time crunch.   Does anyone know twincat well enough to help guide me?
  25. I am trying to connect a Delta ASDA-A2 Servo internal motor encoder to a Delta DVP28SV high speed counter input.  I was successful in connecting the servo to the plc on position mode with an external encoder connected to PLC high speed counter.  Currently having trouble in finding the correct wiring between the servo drive and the plc to count the pulses from the internal motor encoder.  Attached are some figures from the servo drive manual. OA --> X0 is obvious, tried s/s to GND, COM-, VCC and VDD... no result. Any suggestion would be highly appreciated.