Search the Community

Showing results for tags 'software for fx3s'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 89 results

  1. Hello, everyone. I want to ask for help..  i want to upgrade HMI hakko V7 to V9.. have file hmi in V7 use software V-SFTV5 but when I open file V7 use software V-SFTV6 its cant convert and i attached the screenshoot below..  can someone tell me what's wrong?
  2. Function Block

    Where would I find TC_2PID_Function_BLOCK? as described in the Temperature Regulation Solution, Quick Start Guide v1.02 Is there somewhere on the omron web site to find all up to date FB Libraries?
  3. FX3S not responding to HMI.

    Hi guys, I am an Electrical engineer on a cruise ship. I have a mixer (galley equipment) that is controlled by a FX1S-10MR PLC. It uses HMI F930GOT-BWD-E. Recently we found the PLC to be malfunctioning and replaced it with a new one from our stock. The new one is FX3S-10MR. Now, when i try to increase or decrease the speed via the HMI, the PLC doesn't respond; infact, the inverter just maintains a single frequency. The PLC is "supposed" to be pre-programmed by the manufacturer of the Mixer. I have very less knowledge of PLCs and sorry if i come across as stupid. I have been reading a bit lately. Do you think it would work if i can copy the program (from the FX1S PLC of another working mixer) by using GX works2 / GX developer software and write it on this new FX3S model ? What will happen if i change the type of PLC of this FX3S model to FX1S (just speculating since it's working find with FX1S). Today i tried to view the program inside this FX3S plc on GX developer and it does have a program. I am clueless though why it's not working with the HMI. Kindly, provide me with some guidance. TIA.
  4. My apologies for being a newbie on this, but could someone save me on this... I have a Viper 650 and an eMB-60R controller which I want to control by ePLC connection using an NJ501-1300 PLC unit, SYSMAC Studio with EIP Adept Library for Robot... All are starting up well, and I connect all components to a switch hub...  But following the ePLC guidelines, the IP Address showing on the controller is 172.16.132.111 I change the IPV4 IP Address on the PC settings to 172.16.132.10 and the subnet to 255.255.0.0 but the Adept IP Address Setting Tool on SYSMAC doesn't detect the Robot IP Address, also i tried ipconfig on command prompt which shows a different IP Address IPV4 169.254.197.75 and subnet of 255.255.0.0, I changed the previous setting on the PC setting to 169.254.197.10 with the same subnet. But still PC doesn't recognize. I tried both configurations if ACE Software can detect it but the same ACE can not detect it also... Appreciate any thoughts on what's wrong in my configurations. Thank you.
  5. Fuji Wsz plc

    Please send Fuji Wsz plc software download link  
  6. Fuji Wsz plc

    Please send Plc software link
  7. Currently, our SCADA setup uses Kepware, Wonderware, and Canary Labs data logger and historian. The data flow is as follows:  PLCs --> Kepware (on PC near process) Kepware --> Canary Data Logger (on PC near process) Canary Data Logger --> Canary Historian (on Server) Canary Historian --> Canary Axiom Viewer Client (on engineer's PC) We use Wonderware as an HMI on the Process PC to control the process. As many will know, this is very wasteful as Wonderware includes many other features and we are paying for all of them yet using only the HMI feature. Our goal is to cut Wonderware out of the equation (i am aware that Wonderware  could replace both Canary and Kepware with its data logger and OPC server features but this is the direction that was chosen so we are going with it).  My question is: Does anyone know of any simple and cheap (-er than Wonderware) PC-based HMI software that could replace Wonderware on the Process PC?
  8. Help with Fx0s 30MR

    Hi there, just need a little help, I’m very interested to learn all about plcs, I know the basics and I know how to wire them, programming them is the hard bit! Ive got an FxOS MR30 from work, to play around with, I know I also need Gx developer also,  my question is,  could I use gx developer “micro fx “ for this?    It seems to be a lot cheaper than the normal go developer.http://ie.farnell.com/mitsubishi/gx-developer-fx/software-micro-fx-plc/dp/3825577 any help with this would be great thanks 
  9. PLC Training

    Hi Everyone We are setting up a initial training in PLC programming for technicians, I got some experience with SIEMENS S7 but this seems to be an expensive choice, we would like to opt for a budget PLC but at the same time would like a user friendly software for teaching......I would like to have views of users of other PLC brands such as OMRON, MITSUBISHI or even Schneider??? thanks Jay
  10. I could do with a bit of help  I am trying to control 10 frd 720 inverters over Morbus with a fx3s fitted with fx3u485ADP-MB adaptor. All wired up ok with Mitsubishi cable to their spec . So I think I have a problem with my code in the PLC does anyone have a working program that I can modify for my machine  Regards Smythe
  11. FX3sa-20MR

    Hello everyone, Have a nice day to all. We just received a small machine from china, and definitely we done a lot of modification to add  safety and other sequence, to adapt this machine to the existing line. I'm familiar with siemens and omron, and this is my first time for mitsubishi PLC. FX3sA-20MR, can somebody pls. help me what software do i need to download and programming cable to communicate with the PLC. Thank you in advance...
  12. Fx3s plc

    Hi, all version gx work2 can support FX3s? Im using version 1 gx works 2 and currently got new fx3s-10mr/es w/out program..i tried to make new program but fx3s ot included in this software
  13. Fx3s

    Hi, all version gx work2 can support FX3s?
  14. Software for Dynapro terminal

    Hello!  I have a Dynapro ET3170W touchscreen terminal from which I would like to upload the screen configurations.  I have tried Google searches and not found anything except user manuals.  3M has not been any help either. Can anyone tell me if there is a software program to do an upload or what I would need software wise to do it? I saw something mentioned in the application developer's manual about a TCS software package, but have not been able to find anything about it. This is really the only hurdle left in the project I am working on, as a Maple Systems or Direct Automation terminal can do the same thing as the Dynapro, I just need to know what commands are sent from the various screens.  Thank you in advance for any help.
  15. Does anyone here use this? Control Draw If so how useful do find it? Worth spending the time on learning or better off with another product? If so what? My application is going to be for in-house management and design of control systems for a food manufacturing plant.   Thanks.
  16. Hello I am kind new at Allen B. PLC and i have to make some changes in the PLC program: - add 2 safety switches. - add 4 photo sensor. just want to know what software do i need to make changes online. PLC \I have is  SLC 5/03 1747-L531 also have a touch scream terminal that i need to modify   panel view C600   thanks for your help guys.
  17. Now introduce a new product, Kinco HMI MT4414TE-CAN from FastToBuy.com This HMI use 32-bit RISC CPU and streamlined LINUX kernel, you can display a variety of true-color graphics format, and its superior processing speed and software to meet the needs of most users. and with a memory 128M FLASH + 64M SDRAM. The Kinco series HMI configuration editing software (official version): _Kinco HMI software_V2.2_Build131108 is Automatically installed in this product. View more info click here
  18. Hello, I'm looking for a simple data logging software, something that doesn't require any programming skills. Thank you!
  19. C28P processor

    I purchased a couple of C28P units on Ebay, thinking they were I/O units which I could connect to my C28K. Unfortunately, when I tried to use syswin software to enter a ladder program into the units, I got rejected by the software.  Can someone tell me what software I need to communicate with C28P.  If not, does anyone want to trade these units for C28K.. 
  20. how to check display type?

    Hello, I have a silly yet anoying problem, How can i check the used NS / screen type in a current x designer project? So i have a project, and i need to get a display to test it, but i need to check what is the display type.
  21. Emersion plc

    Please help me for emersion plc Ec-20 programing software download link  
  22. Emersion plc

    Please help me for emersion plc Ec-20 programing software download link  
  23. Hi dear , may anyone can help me.. My Computer has broken so all my software include cx programmer and Designer has been disappear. Where i can get free software CX One for free , thank a lot .. Best Regard
  24. ingineer

    hello. out there. I need som help. I never user Beckhoff Twincat before. but now I have a smal project on Twincat. after two days to undersatnd the Twincat . I still don't understand how to make configure hardware on twincat. som body can help me please or telle me where I can find the doc. thanks
  25. I am in the learning phase of HMI and PLC programing and am trying to use some of the hardware that has been donated to me. I have an AB panelview 300 micro terminal and a Micrologix 1000 Plc (they are not tethered yet). I have constructed a small test board with everything mounted to it and have successfully written and downloaded a simple project to the plc with timers, etc.   Now I need to find a way to program the terminal to make changes to the program.   I am looking for some free panelbuilder 32 or anything that will allow me to program the terminal and use it.   Can anyone help me? All help will be greatly appreciated!