Search the Community

Showing results for tags 'slc 500 BASIC'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 31 results

  1. HI, I am trying to write a program to read the timer up to 2 seconds, then use that time to calculate the frequency per hour the machine is running. Could anybody point me in the correct direction to Read  %TMx.V & store that value.  I have done this with Omron, but do not use SoMachine Basic very much, so am a bit lost, I used 2 timers, one 20Ms to collect the number of the 2 second timer, set read reset. add the 20ms back on then do the calculation then multiply by 60, to got sheets per hour of a printing machine. It was suggested count how many over 36 seconds then multiply x100, but that is slow, mine was close enough & instant. Thank you.  
  2. View File GE SRTP Ethernet Driver for .NET 6, .NET 5 & .NET Core. - ASComm IoT ASComm IoT for .NET 6.0, .NET 5.0 & .NET Core developers. Class library for use in Visual Studio.NET to create HMI/SCADA apps that communicate with GE/Emerson SRTP PLCs and compatible devices via Ethernet.   Does not require OPC. Does not require 3rd party drivers Visual Studio.NET 2017, 2019 and 2022 compatible All .NET 6.0, .NET 5.0 & .NET Core targets are supported, including Web, Windows, console, and service apps. Runs on Windows, Linux, Android and iOS Extremely high performance - 5~10 mSec typical transaction time Supports PACSystems family native tag names Abstract base classes allow you to write generic code that works with all drivers Synchronous and asynchronous read/write methods Data change notifications Provides common user interface across all driver classes No limit on number of devices or data points Multi-threaded for high data throughput Includes extensive help system Example applications with VB and C# source code included. Easily connect office systems to factory floor. Runtime-free for qualified applications Submitter Automated Solutions Submitted 12/05/22 Category Demo Software
  3. Version 1.4.0

    10 downloads

    ASComm IoT for .NET 7.0, .NET 6.0, .NET 5.0 & .NET Core 3.1+ developers. Class library for use in Visual Studio.NET to create HMI/SCADA apps that communicate with GE/Emerson SRTP PLCs and compatible devices via Ethernet.   Does not require OPC. Does not require 3rd party drivers Visual Studio.NET 2017, 2019 and 2022 compatible All .NET 7.0, .NET 6.0, .NET 5.0 & .NET Core 3.1+ targets are supported, including Web, Windows, console, and service apps. Runs on Windows, Linux, Android and iOS Extremely high performance - 5~10 mSec typical transaction time Supports PACSystems family native tag names Abstract base classes allow you to write generic code that works with all drivers Synchronous and asynchronous read/write methods Data change notifications Provides common user interface across all driver classes No limit on number of devices or data points Multi-threaded for high data throughput Includes extensive help system Example applications with VB and C# source code included. Easily connect office systems to factory floor. Runtime-free for qualified applications
  4. Modbus/TCP Client Driver for .NET 6, .NET 5 & .NET Core. - ASComm IoT View File ASComm IoT for .NET 6.0, .NET 5.0 & .NET Core developers. Class library for use in Visual Studio.NET to create HMI/SCADA apps that communicate with Modbus/TCP Server devices via Ethernet. Does not require OPC or 3rd party drivers Visual Studio.NET 2017, 2019 and 2022 compatible All .NET 6.0, .NET 5.0 & .NET Core targets are supported, including Web, Windows, console, and service apps. Runs on Windows, Linux & Android Extremely high performance - 5~10 mSec typical transaction time Supports Modbus functions 1, 2, 3, 4, 5, 6, 7, 11, 12, 15, 16, 17, 20, 21, and 24 Address mode support includes: Zero-based, One-based, Modicon 5-digit (1, 10001, 30001, 40001), Modicon 6-digit (1, 100001, 300001, 400001) Abstract base classes allow you to write generic code that works with all drivers Synchronous and asynchronous read/write methods Data change notifications Provides common user interface across all driver classes No limit on number of devices or data points Multi-threaded for high data throughput Includes extensive help system Example applications with VB and C# source code included. Easily connect office systems to factory floor. Runtime-free for qualified applications Submitter Automated Solutions Submitted 05/18/22 Category Demo Software
  5. Version 1.4.0

    34 downloads

    ASComm IoT for .NET 7.0, 6.0, 5.0 & .NET Core developers. Class library for use in Visual Studio.NET to create HMI/SCADA apps that communicate with Modbus/TCP Server devices via Ethernet.  Does not require OPC or 3rd party drivers Visual Studio.NET 2017, 2019 and 2022 compatible All .NET 7.0, .NET 6.0, .NET 5.0 & .NET Core 3.1+ targets are supported, including Web, Windows, console, and service apps. Runs on Windows, Linux & Android Extremely high performance - 5~10 mSec typical transaction time Supports Modbus functions 1, 2, 3, 4, 5, 6, 7, 11, 12, 15, 16, 17, 20, 21, and 24 Address mode support includes: Zero-based, One-based, Modicon 5-digit (1, 10001, 30001, 40001), Modicon 6-digit (1, 100001, 300001, 400001) Abstract base classes allow you to write generic code that works with all drivers Synchronous and asynchronous read/write methods Data change notifications Provides common user interface across all driver classes No limit on number of devices or data points Multi-threaded for high data throughput Includes extensive help system Example applications with VB and C# source code included. Easily connect office systems to factory floor. Runtime-free for qualified applications
  6. Wednesday Woes

    Hello, I'm sure I'm not on the right forum for my problem but I was hoping one of you knowledgeable folks will be able to point me in the right direction. I'm having some trouble with a control setup for a simple mechanical deployment / interlock. The application is a 3 panel solar array with a fixed centre panel. The other 2 panels are attached to linear actuators which will drive them outwards with the aid of a nifty hinge and are staged with relays and limit switches. I am having some issues with being able to disengage the leaf 1 / 2 changeover relay without ever making it inoperable in the first place.  Up until there it's all pretty straight forward. I have attached a couple of pictures of the issue.  If anyone knows of a more suitable forum I can take this if I'm in the wrong place.  Please advise. I can upload the DWG file when CAD stops hanging itself eventually Thanks!     Drawing2.dwg
  7.   How do I setup a Read_Var in SoMachine Basic ?    
  8. I am having a very weird issue that Rockwell was not able to help with.  I have a new SE application that I converted from RSView32 and I re-wrote some VBA code associated with the project.  The code works fine on the server while the screen is running in studio.  Once I deploy a Client it no longer works.  It just sits there like its waiting for my trigger to go off, but I am seeing it sit there with a 1 so i know it should be executing the code because as soon as i open the screen in studio and press play the code executes and my data is there.  Does anyone have any ideas for me?   Thanks
  9. Hello! I am new at PLC programming. I am using TM221CE16R PLC with TM3AI8 analog input module and SoMachine Basic v1.6. I am trying to scale analog input value. I am using 4-20 mA pressure sensor. I managed my wiring so that I get raw values in SoMachine Basic. But I don't know how to scale these values to usable values. My sensor works in range 0 - 16 bar. What is best way to get values? Is it PID function block or multioperand function block using equations to get range 0 - 16? I will appreciate your help.   Thanks in advance!
  10. Hello. I am trying to make a serial RS 232C connection between Schneider Magelis HMIGXU3512 and Omron PLC CP1E. However, there seems to be a communication problems between both of the equipment. I am using cable XBT Z9740 for the serial communication cable. The format used is 8.2.N for both equipment. The baud rate is 115200. No Flow Rate is choose. Anyone can help with this kind of problems?
  11. Hi guys, I have an M221 and trying to read process data from a HACH controller via Modbus 485. In the Read_Var function block I need to configure ObjType, FirstObj, Quantity and IndexData. Slave ID is 3 and I am using SL2. So, say if I wanted to read to following registers, Register #40001, Data Type Integer, Length 1, Description- Sensor Measure Register #40005, Data Type Float, Length 2, Description - Sensor Temp Register #40007, Data Type String, Length 6, Description - Sensor Name what do I put into the Read_Var function ? I am completely new to this and it's just not clear to me. Thanks John   
  12. This course is designed to equip the novice with no prior PLC programming experience with the basic tools necessary to create a complete PLC program using ladder logic common to most current platforms. Use Software : - Somachine EcoStruxure Machine Expert Basic - Free - Vijeo Designer Basic Full Articel About Lear PLC Schneider  Video Tutorial Learn PLC Training Free
  13. Hi gays. I have a problem with my indradrive when I try to jog a Rexroth MSK motor. Indradrive: HCS02 (Basic Universal, single axis), control unit: CSB01.1C-SE-ENS-EN1-L1-S-NN-FW     &      power unit: HCS02.1E-W0012-A-03-NNNN Servo motor: MSK100B-0200-NN-S1-BP0-NNNN For joging (testing the motor in closed loop servo just with pc), I think need to run easy startup mode under the commissioning tab of indraworks software. (or am I wrong?) I connected the drive  via serial interface (out of the drive X2 connector) to my pc, and connected the drive to motor encoder port (out of the drive X8 connector).  I power on the drive (via X13) and go to easy startup mode, I face an "F3130 Error when checking input signals" alarm which I can not clear till now. referring to online help  I find some remedies declares that the problem arise from wiring. I tried to examine X41 connector with supplying 24v to it in various situations. but the mentioned alarm is resisting. anyone can help?   
  14. Hi every one, I'm new here. Is there any CC-Link IE field basic master or simulator that can be use on Windows PC, for testing  CC-Link IE field basic slave communication ?   Thanks in advance    
  15. Hi Guys I was wondering if any one of you could tell me how to set up some basic button functions? I need a basic instruction on how the followering button setup, could be done on the HMI, preferable with exaples or tutorials etc. !!! I´m working with the current setup: NX1P2, using Sysmac Studio, Module version 1.25.1.0, along with a NA5-Terminal, version 1.18 !!!  START_VALVE_1_BUTTON = Toggle, Momentary, Set or ?? - (Need the START_VALVE_1_BUTTON to activate ON_BUTTON & OFF_BUTTON flashing, indicating selection option, ON or OFF, meaning activating start valve 1 mode, or deactivate the mode). START_VALVE_2_BUTTON = Toggle, Momentary, Set or ?? - (Need the START_VALVE_2_BUTTON to activate ON_BUTTON & OFF_BUTTON flashing, indicating selection option, ON or OFF, meaning activating start valve 2 mode, or deactivate the mode). ON_BUTTON = Toggle, Momentary, Set or ?? - (Need the OK_BUTTON & the OFF_BUTTON to flash simoustaniously, after START_VALVE_1_BUTTON, or START VALVE_2_BUTTON has been pushed). OFF_BUTTON = Toggle, Momentary, Set or ?? - (Need the ON_BUTTON & the OFF_BUTTON to flash simoustaniously, after START_VALVE_1_BUTTON, or START VALVE_2_BUTTON has been pushed).  !!! Hoping to hear BACK from some of you VERY soon, because I need the know_how ASAP. !!! !!! Write soon !!!
  16. Hello. There is a controller FX5U-32MP in the presence, the inscription "CC-Link IE Field Basic" and the Inverter (FR-A840-00170-E2-60) near the connector, the inscription "CC-Link IE Field Basic" on the front panel. I set up both devices according to the instructions. It turns out to read the state of the inverter (state, frequency). And I can not manage from the controller. Already all the settings that could have changed. Can you scribble what is wrong? p.s. Sorry for the bad english.
  17. hey, I'm making a program to controlle mutliple machines. But the problem is that i'm working on 2 plcs to controll it all, but there are some %MW that i need in both PLCs. Is there a way to connect the PLCs so they share these %MWs to both PLCs know what value is in it?
  18. View File GE SRTP Ethernet Driver for .NET .NET Component for use in Visual Studio.NET to create HMI/SCADA apps that communicate with GE SRTP devices via Ethernet. Supports PACSystems, Series 90, and VersaMax.   Supports PACSystems symbolic variables and CPU rack + slot specification. Does not require 3rd party drivers Does not require OPC x86, x64, and Any CPU compatible Visual Studio.NET 2005, 2008, 2010, 2012, and 2013 Compatible Most .NET targets are supported, including Web, Win Forms, WPF, console, and service apps. Build Windows Forms, console, and ASP.NET applications that run on Linux with Mono framework. Extremely high performance - 5~10 mSec typical transaction time Optimizes multiple register configurations into minimal transactions Tag database can be configured via code or visual designer Abstract base classes allow you to write generic code that works with all drivers Synchronous and asynchronous read/write methods Data change notifications Provides common user interface across all driver classes No limit on number of devices or data points Multi-threaded for high data throughput Includes extensive help system Windows, Console, and Web Example applications with VB and C# source code included. Easily connect office systems to factory floor. Free 30 day fully functioning trial version available for download Runtime-free for qualified applications   Submitter Automated Solutions Submitted 05/09/09 Category Demo Software
  19. Basic HMI Graph

    Hello All   I'd like to display data in 2 or 3 arrays as a graph on a KTP400, does anyone know of a way to do this, I know I could use a trend display , the only issue I have is that the array will be updated in around 10 to 20 msecs per element, and as far as I am aware the time between the trend values need to be 1 sec or more. Any comments would be appreciated. 
  20. Is there a way to choose with %MW you use depending on the value of %SW49? For example, i have 7 %MW: -%MW4 that needs to be active when %SW49 :=1 -%MW8 that needs to be active when %SW49 :=2 -%MW12 that needs to be active when %SW49 :=3 -%MW16 that needs to be active when %SW49 :=4 -%MW20 that needs to be active when %SW49 :=5 -%MW24 that needs to be active when %SW49 :=6 -%MW28 that needs to be active when %SW49 :=7 so is there a way to say %MW0 := %MW(4*%SW49) on a operation block?
  21. Hi, I'm working in so machine basic v1.5 and I'm wondering if it is possible to change the start time and stop time in a schedule block with a %MW. So is there a possibility to for example say %CH0.??? := %MW5 in an operation block? And is there a page where u can see al the possible codes. I already discovered that %TM0.P changes its preset but i don't find a list of al those possibility's.
  22. Hello All,   I am having some issues with Excel while communicating with the Omron PLC. The Excel file is getting the data from the PLC and the macro doing what I want to do, but I am getting the following error messages when opening the excel file.   I am attaching the pictures of the messages and the code where debug send me.   Thank you very much in advance
  23. FX5 CC-Link IEF Basic

    hello. I have developed project with 3 FX3U PLCs with ENET modules for communicating between them, and one of fx3u connected by profibus with 2 fx2n-32DP-IF I/O station (developed just hardware). This project still wait when customer accept it. I'm exactly sure that it will work perfectly. But now i think about exchange old and expensive fx3u to fx5u. I search for best solution for this task on fx5. I have a doubt with I/O station. Each remote station consist of 32 inputs,16 outputs, 8 AI. So i considered as a solution CC-Link IE Basic because no need buy additional modules. Did someone use fx5 CC-Link IEF Basic? As i understand ie field basic configurations like simple rs485 cc-link with occupied station, not like full ie field. FX5U can be the master of CC-link IEF basic with embedded ethernet with 6 slaves station and can be local station with FX5-CCLIEF module. But i not sure that i can use fx5 with NZ2 CC-Link IE Field Remote I/O. I have a doubt with configuration this station, because in CC-link IEF i can add this station and see how many rx/ry rww/rwr points i need, but for CC-link IEF basic configuration i can add just CC-link IEF basic module and choose number of occupied station. Slave 1) NZ2GFCE3-32D + NZ2EX2S1-16T (32/16) and  NZ2GF2BN-60AD4 + NZ2EX2B-60AD4  (8 AI). Slave 2) NZ2GFCE3-32D + NZ2EX2S1-16T (32/16) and  NZ2GF2BN-60AD4 + NZ2EX2B-60AD4  (8 AI). So can it work if not what device can be used with CC-link IEF basic? What benefits can give cc link ie field basic network than ethernet socket connection via UDP between 3 fx5 plcs? Or easier way using ST lite series and try to connect via modbus tcp.(as i understand fx5 provide p502 and modbus tcp)  
  24. My intention is create a visual basic program with access (or excel), if possible with a Cold link (so I wake up when I need data only). See if you can orientate me about the best way and solve my doubts. I am pretty new to all this. I have several Allan-bradley plc’s in the Ethernet network. Several PC’s with windows 8 and excel/acces in the latests versions I have a server in the net where I have installed RSLINX gateway version. I have created a topic and I can see the PLC variables in there OK. In rslinx  commnications -> I have set the click “enable rslinx classic gateway” I have run the OPC test client and it works OK according to some test Ihave found in google 8so OPC/DDE server is active etc) I want to retrieve Data in My PC from the rslinx that is in that server called BCNA08. I have colleagues that know how to run the EDIT ->copyDDE/OPC link and create a HOT LINK in excel in the same computer for other versions of rslinx (lite I believe) that they had for tests purposes. So I try the same but of course it does not work for a PC that is nor running RSlinx. My Rslinx is in BCNA08. How can I set a hot link (excel continuos update) and cold link (visual basic open/close communication). Any help or suggestions will be welcomed. Any good link to learn more too.  
  25. I'm using TM221CE40T PLC with TM3DI16 DI extension. I'm programming it using SoMachine Basic. In the program I implemented a counter (%C0). I've read in the documentation that %Ci.V stores the current count value. I want that to display this value on a Magelis HMIS5T. How could I store the current count value (%Ci.V)? Thanks in advance!