Search the Community

Showing results for tags 'simple motion module setting tool'.

  • Search By Tags

    Type tags separated by commas.

  • Search By Author

Content Type

Find results in...

Find results that...


Date Created

Last Updated

Filter by number of...

Found 120 results

  1. Dear Friends,       I want to set my servo controller overload setting as per my machine load requirement since all my servo installed in my machine over travelling and hitting trying to run continuously which is resulting servo failures ,repeated timing belt cut issues.Kindly help me resolve this issue.since i am not familiar with servo controllers.Model used A5 II minas servo MADKT 1507 and contol mode in position control setting.    
  2. Is it possible to add another AB Rockwell PLC to the network tree as a Generic Ethernet Module and use it as IO? Any idea where I would find information regarding assembly instance and size of I/O/C for AB Rockwell products? If possible, what are the pros and cons when compared to produce/consume and MSG instructions? Don't need to use it real world, just curious. Many thanks in advance.

  3. 1S Servo Merge Move

    dipen_95 posted a topic in NJ Series / Sysmac Studio

    Hi, I am trying to do a merge move on 1S Servo. The condition are as follows: Task: Move 2 in(absolute value) and then Move back to 1 in (absolute value). I have to do this move 10 times in a row.  The application is material leveling after dumping in the mold. The only question i have is if I use just MC_MoveAbsolute command, the only buffer mode for transition available is velocity. Is there a way i can do it with position. I dont want to stop when I can go from 1 to 2 and 2 to 1 again and again. Its time consuming. But rather a nice oscillation motion without stopping to mimic leveling. Can anybody please help me out with this problem.   Thanks

  4. Delta PLC Analog Noise Reduction

    Rishikesh posted a topic in Other PLCs

    Hello All, I am Using Delta SE Series PLC and 06AD Module for Pressure Transmitter. But Analog input get fluctuate continuously. Is anybody have program for analog scaling.
  5. Hi guys! Can anybody help me? I have an existing controlnet network. How can I connected a new module? Like an 1794 IB16. What should I need to do after I connected the new module? One more question: What's the difference if I do not connected the new module right after the last module, but I connected between already existing module. Then what should I need to configure. If anybody want to help, please write like step by step. I'm a beginner, but I want to imporve myself. Thank you for your help. I almost forget, I need to work with Allen-Bradley PLC, and I have RSLogix 5000 software.
  6. Hi,  I'm new to TwinCAT 2 and i'm upgrading a long time design (hence the TwinCAT 2 reference), to read a more sensitive torque signal.  I'm using a Beckhoff CX1030 as my PLC Controller.  I needed to add 'homing' to my motor sequence and confirmed with Maxon, im using the function blocks correctly and in the correct sequence to establish my 'absolute zero'/'home' position.  The motor has an output to write to:  ControlWord, which tells the motor that the position it is sitting in is '0.'  My program compiles, it runs, it writes each function block, but it's not seeming to get back to the test run opMode, even though i tell it to and the function block performs the 'Write' function.  it's stuck at zero and not reading an analog input signal from my torque sensor.  so im getting an artificial torque reading through every test.   i think this is related to my tare motion.  I start the program, home the motor, get into profile velocity mode, tare my sensor, enter profile position mode, go back to position 0, then back to profile velocity mode, run a test, sample data, go back to 'home' or '0.'  I wonder 1st, is my variable not linked properly through the system manager?  2nd, i set a boolean variable to set the 4th bit to 1 in my control word write (setting the 4th bit high will set my current position to absolute zero), but did i not connect the program to the main sequence properly?  looking to read a valid signal again and see that my motor moves back to 'home' each time.  Do i not need to home the motor after the tare, since the tare nulls out the torque value after the tare? after this i need to program my sample period, instead of it being fixed, as it is currently written and then use my home position as my trigger to start sampling.... Beckhoff applications department is overloaded, currently and can't help and this is all beyond the knowledge of the general support line.  I've gotten fairly far, on my own, but of course, the project is under a time crunch.   Does anyone know twincat well enough to help guide me?
  7. Hi Guys! I have a problem with Motion axis move (MAM) command. There is an Allen bradley servo motor what is working well. But I need to add a new program section, wich is in  a specified moment, the axis should move a certain distance. I think I need to use the mam command, just I dont know how can I configure the motion control part. I need to make a new tag ? or what ? I need to use a user define ? PLS help me.   
  8. Hi Everyone! I try to read Analog Data in PLC Master through Salve Module (ECT-21) but i dont see any data, with an Digital Module i can read and write, but with analogic module i can't do anything. The analog module works perfect, i have 4-20ma Simulator and work fine. Modules: PLC: NJ501-1300 Slave: ECT-21 Analog: ADO81-V1 Can u help me? Regads..
  9. Looking for some servo application help. Software: I have GX works 2, GT Designer, and GX Developer.  Hardware: PLC L06CPU-P, GOT2000 HMI, MR-J4-350B servo amps, HG-JR35JK motors, LD77MS2 Pulser I have (2) AC servos that will simply move an aluminum frame backwards and forwards using a FESTO belt mover and I have a servo gear reducer 20:1. I have a "simple motion module"and all of this hardware and software, plenty of time, and would really like to finish this project off. But this is my first servo and my first hmi project. I have some experience with Omron, Mitsubishi, and Allen-Bradley plc's, and consider myself novice at best. Any sample programs or help getting me started would be greatly appreciated!  
  10. Hi, I have encountered an unexpected "PRI" LED indication of 1756-RM Series B module. When the affected redundancy module is set to primary, the status of the "PRI" LED indicator is blinking red. On the other hand, it is set to a solid red when the RM is set as secondary. I have read the manual and there are only two expected behavior for the "PRI" LED indicator, green if it is set as the primary and off if it is secondary. Does someone encountered this scenario already?   P.S. The RM does not have any minor/major faults when accessed. The status indicator indicates "PRIM" when the affected module is set as primary and "SYNC" when set as secondary. Manual switchover between controllers are done and was successful. Thanks in advance! Regards, RIValencia
  11. Hi Here's a question I'm about to ask Omron.. as soon as I can figure out who to ask.. It's complicated asking support.. their web email form doesn't make complex questions easy. Here's the question: Can the NJ CPU program a LinMot linear motor to make the "Random Sea"? The NJ has a mixed protocol.. Ethernet/IP and EtherCAT (CoE),  and claims to be a "Motion Controller".    I doubt Motion Control is available on it's Ethernet/IP line.. but the EtherCAT might be another story.   Certainly The Omron NJ is a Motion Controller for Omron NJ series drives.. However, how well does it work with LinMot? Here's the curve.  Imagine a LinMot Linear motor continuously moving, never really stopping, following a real-time, mathematically generated curve, moving positive then negative, at random frequencies and random amplitudes. Almost never repeating a motion sequence. looks something like this: Yet, after a while the motion history fully represents the spectral distribution of energy on the surface of the ocean. Spectrum analyzers can display it, and mathematics can define it..  I just have to make that sea in a model scale…    (Time scales by the square root of the scale factor) And keep the water in the tank: https://www.youtube.com/watch?v=SQd6YzBWVvI The big question is: Can the Omron NJ get a LinMot Linear Motor to do this? … LinMot thinks YES.. but, isn’t sure. Yes there are ways to “connect" LinMot to The NJ.. EtherCAT (CoE), Ethernert/IP but… there is nothing in the LinMot drive that can create or store a predesigned Random Sea .. Only a Motion Controller, generating real time motion commands, by running  mathematical equations, "on the fly” can do that.   If the NJ is a true “Motion Controller”, and the LinMot C1250-DS-XC is implemented as an “axis” by Symac Studio, which it is…       Then, there may be hope. Closed loop, PID feedback remains with the LinMot drive, with special settings in LinMot Talk … Homing might have to be done with the NJ .. or by Digital I/O’s What do the Omron experts out there think?  Can this be done? Thanks much, Regards, Michael
  12. I have a coworker who swears up and down that he once came across a bit of software that would allow one to mount the cf card of an Allen-Bradley plc on a windows computer while it was still in place in the plc, or at least access the contents of the card. Has anyone ever come across this unicorn?

  13. MR J3 A SERVO

    pawan posted a topic in Mitsubishi

    I want to run MR J3 A type 10 nos servo without using network, I'm to run servo using hardwired.please name motion controller to run 10 servo on hardwired..  

  14. Omron Support tool

    SirMathe posted a topic in Omron

    Good day, I am trying to upload a programme to a Omron NT600S HMI, can anyone advise or help me with the right support tool software that I need. Thank you
  15. hI.. I've asked for this in the past and, so far, haven't been very lucky.  Most of the projects I run into have 4 or 5 axis, lots of analog and sensor input.. or don't have the HMI part of the "Machine" I have a nice NJ 101-1000 with the NA 7 inch HMI.. along with a R88BD-KNA5L-ECT servo and a 50W  G5 motor.. type  R88M-K05030H-S2.  All On a nice rack with power supplies and some EtherCAT I/O  (It all functions .. even "MC Test Run" gets the motor to jog ..    But.. no way to "home" it.... The motor is in "rotary mode"   but... it's NOT got an Absolute encoder.. it's a incremental... sniff!     I just want it to stop on zero ..Or anywhere, and call it zero ... and make moves plus an' minus in degrees, that's all....  I assume I have to send it some signal (push button) while it's spinning that tells it it's in "Proximity" to home and it then it does something which makes it end up on zero.    I've homed a lot of linear motors (LinMot) an' they are very easy to work with.    But, Omron has 10 different homing modes .. and they aren't very well explained.  Well, they aren't explained at all in that 502 page user manual... you have to already know how to do it, in order to understand the explanation... Example:  Take the "Home Proximity Input Signal"  .. I can imagine what it might do, to help control a move to home.  I can even imagine what's making the signal .. and that somewhere there is a place where the homing parameters are set... like the "axis setting table"  .. but, it's not a Global Variable, or a Data Type .. I could imagine it gets into the system from the CN1 I/O connector? or some I/O somewhere? But.. I grow weary of imagining how this system actually works..  Building a simple working project, from a tutorial, or even downloading a simple working project (.smc2 file) and making the minor adjustments to fit my equipment ... would make all the difference in the world.   I've searched Omron's Libraries of .smc2 files.  Haven't found any yet that aren't on the level of "Top Gun" (a seriously complicated project for a 1-week training class) ... Oh there are several.. related to IAG object files .. but those Library files are not "working projects" intended to serve as a Tutorial.. they are limited projects, ready to be configured with IAG Object files, and "your" programming ... So that you can write the programs you need "faster"... which is nice... but, no help here. Somewhere out there.. is a nice simple .smc2 project file where you get to control a simple motor from the HMI  ..Preferably using an NJ CPU and a NA HMI .. home the motor.. jog the motor and input a few "go-to" positions... sigh!..   Like you would do in a One or Two Day class...   This kind of thing should be already be available in the Sysmac Library ... Thanks much for listening..  sorry about the rant.  
  16. I am trying to learn the logic of a process at my new job. There are tag names that I can't make sense of because they end with _xva, _xvb, _xvu, _xvd, _xvo, _xvc, _zsm, _zsu, _zsc, _zso, _zsd and so on and so forth. I know they are associated with motion, but I need to make better sense of them. There are no descriptors. What do they mean and is there a resource available that I can reference?

  17. FX3U-ENET-ADP User's Manual

    pigflying posted a file in Manuals, Tutorials

    Version 1.0.0

    67 downloads

    Using this module to replace of FX3U-ENET to reduce the cost(if not using the e-mail function)
  18. FX3U-ENET-ADP User's Manual View File Using this module to replace of FX3U-ENET to reduce the cost(if not using the e-mail function) Submitter pigflying Submitted 01/19/17 Category Manuals, Tutorials
  19. hi.  i want to make some program that work with indirect adress. example, i make program with many much type. I make with Got-1000 mitsubishi.   can you bring me some example? i am sorry, my english is Bad
  20.    Have 10 POE Analog Input Modules available on clearance  10/20-channel Voltage Input, Current Input, & Analog Input Module with High Voltage Protection PoE Module, communicable over Modbus TCP and Modbus UDP    Model Number PET-7017-10     Regular price $459.00/EA    Clearance price $344.25/EA   only good on clearance quantity only.   http://www.icpdas-usa.com/pet_7017_10.html      
  21. i need a example code for position control of MR-J3-20A with QD75D4 as intelligence module. and i want to see the parameter if possible  
  22. Just wondering if I need to set up two Motion Groups to specify the direction of travel along 1 AXIS? (Forward and Reverse) If not, how do I specify direction when using motion instructions (specifically MAM) with incremental motion. 
  23. Hello everyone! I need your help.  I use the PLC: Q06UDEHCPU and the module: QJ71MB91. I programmed in the program GX Works 2 I instaled a library of "QJMB91ModbusSerial_V120 (FB - QJMB91ModbusSerialMaster)" and using it wrote temperature sensor interrogation program. The sensor is interrogated by the channel 2 and has the following switch settings:  Switch 1 - 0000; Switch 2 - 0000; Switch 3 - 0000; Switch 4 - 0A04; Switch 5 - 0000; which are specified by the PLC parameter in GX Works 2. I found an example of writing a program to install the switch settings in the user manual QJ71MB91 using ZP.UINIT instructions. I wrote a program to this exemple. Not prescribed bit address, which should be established when the program is executed (M0) (ZP.UINIT  "U4"  D0  M0). I wrote: ZP.UINIT  "U4"  D0  .  After executing ZP.UINIT instruction PLC stops working, blinking error, settings module is not install. How can I write a program to configure the Switch Setting?

  24. Tool for I/O distribution

    proicem posted a topic in Siemens

    Hi, I am looking for a tool to make I/O distribution in a PLC of around 1000 I/Os. I have a lot of redundant signals (2oo3, 2oo2) and I have to make a consistent distribution in the modules and racks considering some criteria: different channels of redundant signals in different racks, etc. Normally I have done this manually but I wonder if there is a tool to do this much faster and without mistakes. Builders from manufacturers, like TIA portal from Siemens or IAB from Rockwell, are of course very product oriented, they are a great help to select the right hardware, as far as I know they are not able to distribute redundant I/Os. Anybody knows if a tool like this is available?
  25. Hello, I'm new to this forum and PLC world in general (especially to Mistubishi PLCs). I have a task in which I need to synchronize servomotor with another motor that runs conveyer (servomotor needs to stamp a label on a foil on a conveyer), in GX Works3. Servo motor is run by Simple Motion module. I need general tips on how to make pulses from encoder into something useful that can be used to send data to Simple Motion module. I need high speed counter to count pulses (never actually did this, I got this from manuals), how would I, for example, get speed out of it? Number n pulses, divide it with time it took to get to n pulses? How would I make Simple Motion to make servomotor on his Axis #1 to rotate at same speed?