Search the Community

Showing results for tags 'siemens hardware requirement'.

  • Search By Tags

    Type tags separated by commas.

  • Search By Author

Content Type

Find results in...

Find results that...


Date Created

Last Updated

Filter by number of...

Found 193 results

  1. We have machine that is running on Siemens S7 PLC and we have mostly Rockwell Automation/Allen Bradley hardware in the facility. I am working on getting a 1783 NATR to talk to the Siemens PLC. I am able to reach the private interface of the PLC from the private port on the NATR. However when I test the public port I am not able to communicate with the PLC. I have done some digging and allowed the below ports.I have tried setting port 102 to TCP and UPD only and no luck. I have done some digging and I am hearing it is possible to get the two devices talking to each other but I am hitting a roadblock.Anyone have any thoughts?

  2. MB_CLIENT Error

    robror_ posted a topic in Siemens

      Hi there! I'm trying to communicate a S7-1500 CPU via Modbus TCP with an CJ2 PLC using a CP1W-MODTC61 card. I configurated the MB_Client and the CP1W-MODTC61 was also configured as the attached files show. The thing is that I could not read any data from the PLC (the registers are in the correct address and memory area) and I tried different combinations until I started to get data (with the correct values) for a moment, even with a configuration I already tried. After that the block kept writing a 8200 error in the status word and no data was received. According to the manual that reads:     A different Modbus request is currently being processed via the port.     Another instance of MB_CLIENT with the same connection parameters is processing an existing Modbus request. I can confirm that there is no other device doing a Modbus request in either the 1500 or the CJ2, and I only have one MB_CLIENT block in the entire program. So that's where my question comes, is the CPU detecting another "ghost" request, even if there shouldn't be any? Or am I missing something in the CONNECT structure of the block? Thanks in advance for your support!     Click to choose files

  3. Optimized Block Access in TIa Portral

    zubair136 posted a topic in Siemens

    Dear All, i have S7-1200 with seimens hmi.  Problem is that Siemens Hmi is Far Old and now touch is problem . So In replace Weintek Hmi is selected. -----the problem i am facing the data block is optimized in program so i can not access tags in  the weintek Hmi. if i remove the optimization option in attribute then further i could not select some values are retain and some are not. ---- Kinldy suggest me how can i access in weintek the with optimization property check or if you have any other solution    Regards, Zubair Ahmed
  4. Envision a future where PLC management and development is simple, secure, and efficient, so that factories can increase uptime, reduce mean time to recover, and maximize the productivity of their assets. Software Defined Automation transforms the way engineers interact with and maintain their automation systems. Automated Backup, Simple and Secure Version Control, and more...if anyone is interested in trying it out for free, you can sign up here: Free Trial - or schedule time to discuss if this may be something for you: 30 mins with Jay from SDA - Cheers! Jason Silva - Software Defined Automation - jason.silva@softwaredefinedautomation.io - +1 617-869-4818    
  5. hello everyone, Got a PLC/HMI project from machine vendor. The problem is that HMI does not compile. Both fonts are present of course but message suggest error stripping the font.... Sometimes there is additional warning about SimSun but that is just a warning...

  6. Tia Portal Program Upload Error

    zubair136 posted a topic in Siemens

    Dear All i got this error when i upload program from plc to PC  then this error is shown. if i continue then TIA Portal Crashes. Kindly suggest me a solution .    PLC : Siemens 1200 Cable : MPI

  7. Siemens TIA Portal 16 Graph Language

    SillyBoy posted a topic in Siemens

    Hello there, I have installed TIA Portal V16. There is a logic programming language called "Graph" in the siemens TIA Portal. This language is not installed by default in the TIA Portal. How to install that language Graph Language in TIA Portal ? Refer Images:-   https://we.tl/t-BF2PtDcd7W  
  8. hi, I'm trying to find out what kind of HMI panels can be used for a LOGO!8 ethernet plc. are panels from simens that can be used... they are a bit expensive  
  9. When installing and running SIMATIC Management Console, I am able to see all the computers on the current subnet and connected to the Management Console PC. When trying to add the Management Console pc to Network an error pops up saying: "A SIMATIC Management Console error occurred. Remedy: restart SIMATIC Management Console or restore data, or re-install SIMATIC Management Console." I have tried reinstalling Management Console and Management Agent several times and restarting the pc, but it still gives the same error. The version is V9.1 SP1 Update 3 and running on the latest version of PCS7. I have read the manual many times and checked everything such as user rights and services running, but nothing has fixed it. I have also noticed that SIMATIC Management Agent Configurator does not see Management Console and just has "-----" for where it should name the console. Any help or guidance would be appreciated, thank you!

  10. TIA Portal for beginners

    JohnGVid posted a topic in Siemens

    If you learn more quickly after watching videos about PLC like reading the literature without example, then these videos can help you if you are a complete beginner. Enjoy it  (If this is against the rules of this site then sorry for spam  )   PLC:   1. How to create project in TIA Portal   https://www.youtube.com/playlist?list=PLqYtPgi-xbbgUBs7nrNmq5ManYyQ-hvKK       2. Program blocks   https://www.youtube.com/playlist?list=PLqYtPgi-xbbhlni7Uw9-lfs8UIykpuubF       3. Bit logic operations   https://www.youtube.com/playlist?list=PLqYtPgi-xbbitdaKvFJv9WZEOj7VrMf_0       4. Timer operations   https://www.youtube.com/playlist?list=PLqYtPgi-xbbiaWQL8lXja1_Kd1z-jeDXr       5. Counter operations   https://www.youtube.com/playlist?list=PLqYtPgi-xbbgfyg2dwDiR7xzsaXtdI9xo       6. Comparator operations   https://www.youtube.com/playlist?list=PLqYtPgi-xbbgs-WgOvePyRUKgnDBK-qfx       7. Math operations   https://www.youtube.com/playlist?list=PLqYtPgi-xbbgInRxxraaX6RG5LUS8gcpM       8. Move operations   https://www.youtube.com/playlist?list=PLqYtPgi-xbbjQQEXr_bhzjKvNCjBeS1Zw       9. Conversion operations   https://www.youtube.com/playlist?list=PLqYtPgi-xbbjsjfMUtVn3QQ6MJM7cBpTW       10. Program control operations   https://www.youtube.com/playlist?list=PLqYtPgi-xbbgFtnxDkNZ7Amps67nr-KHX       11. Word logic operations   https://www.youtube.com/playlist?list=PLqYtPgi-xbbh6bGa9bgy6cJhVi-RhF0gH       12. Shift and rotate instructions   https://www.youtube.com/playlist?list=PLqYtPgi-xbbhlUnK9ECCKUccqt91Qsw6e   HMI:   1.       Beginning with HMI devices   https://youtu.be/EF4Qprf0Mn8   2.       Basic work with screens   https://www.youtube.com/playlist?list=PLqYtPgi-xbbgPAApJCAGcPZOHViTAT9C1   3.       Basic screen objects           4.    Elements objects   https://www.youtube.com/playlist?list=PLqYtPgi-xbbgOSznFb03Rr_St-2WFcygo         5.       HMI Alarms   https://www.youtube.com/playlist?list=PLqYtPgi-xbbi_V7XENgupV7HFjOJI7Yes   6.       User administration   https://www.youtube.com/playlist?list=PLqYtPgi-xbbgDP9dfAOkW3eodC5aH0kmR         7.       Scheduled tasks   https://www.youtube.com/playlist?list=PLqYtPgi-xbbjsaMlovHL2BDrju8kKgkZi     OTHER: Siemens PLC - Hardware configuration (SIMATIC S7-300) https://youtu.be/WVkAGKsxftw     Siemens HMI/PLC - communication (Basic Example) https://youtu.be/AcN50TShHgY   Siemens PLC - Firmware upgrade/downgrade via TIA Portal https://youtu.be/qEsS7RR7QIw   Siemens HMI/PLC - Recipes (Basic Example 1/2) https://youtu.be/wLmH-QT3T9U   Siemens HMI/PLC - Recipes (Basic Example 2/2) https://youtu.be/_2K6l7dYuqY   Siemens PLC - Upload program from PLC to TIA portal (PC) https://youtu.be/igw-4CxjnLw   Siemens PLC - Add and install GSD file in TIA Portal https://youtu.be/LJKUzv3Zykw   Siemens PLC - Activate and work with Web Server in TIA Portal (Part 1/2) https://youtu.be/WCpiej4S8-U   Siemens PLC - Activate and work with Web Server in TIA Portal (Part 2/2) https://youtu.be/xl4pxLK0CDY   Siemens PLC - Scaling/Converting Analog Input/Output (0-20mA to 4-20mA and vice versa) https://youtu.be/BOjFlhAwO0k   Siemens HMI/PLC - Linear scaling of HMI Tag (PLC/HMI tag scaling) https://youtu.be/XBUknb3JDfE   Siemens HMI - Changing of Date/Time format (12/24 hours format) https://youtu.be/bCVKFrLwzWA   Siemens PLC - Configuring and commissioning of SIRIUS ACT (PROFINET IO) https://youtu.be/yIW6kta34_s   and more...      
  11. Dear all, I'd like to get your support on the issue with OPC UA certificate. My OPC UA server has been built with Node.js. The PLC S7-1500 (firmware v2.9) acts as OPC UA client. It's working well without certificate but when I use certificate, there are 2 situations: 1. When connecting using "Online access" (as attachment) in the "OPCUA Communication >> Client interfaces", I can connect with certificate (after I export and copy the PLC's certificate to the trusted folder of the server). --> server is ok. 2. When coding and running with real PLC: can't connect, there is even no PLC's certificate on the rejected folder of the server and there is no any error, the Status of block "OPC UA Connect DB" is still 16#0000_0000. So, what I did with certificate in TIA Portal (V17) are: - Enable the Global security setting for certificate manager - Created (and tested) with both self-signed certificate and CA certificate for PLC - Added server's certificate to trusted list in "Certificate manager" of TIA Portal (also added to the "Certificate of the partner devices" in  Device config) - In "OPCUA Communication >> Client interfaces", chose the Security Mode/Policy and PLC's certificate (already tried with and without this setting) In my point of view, the problem is that the PLC received the certificate but somehow it didn't read correctly or didn't compare with the certificate in the trusted list because if the PLC does this step, it should send its certificate to (the rejected folder of) server. Could anyone help me to solve this issue? Thank you in advance.   [Update] 1.The PLC throw the error code 16#8016_0000 (BadCertificateHostNameInvalid/The HostName used to connect to a Server does not match a HostName in the Certificate - as I searched in google) but it's very quick so I could not see this behavior at the beginning. 2. I have tested with UA Expert, I can connect without any problem/warning. So, the high confidence that problem comes from PLC. ----------  Best regards, Danh Vo

  12. Export/Import PDL WinCC

    Ctor posted a topic in Siemens

    Hi all, Do you know a way to export/import the graphics screens (PDL) from a human understandable language (XML, CSV, JSON, etc)?? Thanks!
  13. Hi there,  I'm downscaling my business in Western Canada and have some legit software licenses I'm going to sell. This was my first thought as to where I might explore selling/transferring licenses, but I'm also open to polite suggestions.  I have: one Studio 5000 Full Edition ESD Software (9324-RLD600ENE) (software & valid license) two Siemens TIA portal software packages & licenses with Step7 v14sp1 and WinCC Comfort Advanced V14sp1 (software & USB dongles) an unused Simatic WinCC SmartServer license (software & USB dongle) one Progea Movicon 11 Scada/HMI developer license (software & USB dongle) one Progea Movicon NExT DEV3-FL (developer license) (software & USB dongle) an unused Progea Movicon NExT Scada license (RTCS3-F-1K+WB3-1K) for site install (software & USB *unused) one package of Schneider Movicon with license (Vijeo Designer, Unity Pro S, and SoMachine) (software & USB keys) Thanks! Mark
  14. Please let us know if anyone needs to have their Siemens Moore Mycro controller repaired. We can repair these for you depending on the model. 352EA21NNF, 352EA21N1F, 352BA etc. We can also repair the power supplies that go with them and can upgrade the unit from B level to C level software. If you would like a free quote please contact us at customerservice@OttoAutomation.com  or visit us at www.OttoAutomation.com. All repairs come with a full 1-Year warranty and also include a complete refurbishment and testing to extend your units life cycle. Any member of this site will also get a twenty percent discount on these units. Thank you, Otto Automation
  15. We have just moved our facility and we have discovered a box of Siemens parts (and a few random other signal converters etc). I've attached a list of parts if anyone is interested, they are all all new in the box. We'd be interested in selling at a very fair value, reach out if you're interested. Also if you know of a good surplus place to sell the lot to please let me know.  Siemens Inventory.pdf

  16. CP1E won't connect or run program

    Robror posted a topic in Omron

    Hi there! Today a CP1E-E10DR-D suddenly stopped working. RUN led was off and I couldn't connect to it via USB getting this error: "Selected port does not exist. Select proper port number from Change PLC dialog and press OK button", and automatic online function didn't work as well(it's not a cable/driver problem since I successfully connected to a CJ2 CPU using same cable and PC). Since I also tried to connect with the CPU outside the control cabinet with no success, I asume there is something wrong at hardware level.  My question is, have you ever faced something like this? My plan is to try to revive it somehow (maybe trying to locate any defective component in the PCBs or something). So I was just wondering if you have any advice in order to achieve it.  Thanks in advance!

  17. Issue with S 7 300

    sudhanshushahi16@gmail.com posted a topic in Siemens

    Hi i have a s7 300 cpu used in a machine operation but we have an error SF led (red) is constantly on however nachine runs fine in this condition but sometimes the machine just stops dead and nothing at all works at such times the BF led also turns on. Then we turn the power of of the Plc and then tun the power back on and then BF Led goes away but SF led still remains on But as i said in that condition machine runs just fine  Please suggest what to check for this issue  thanks and regards

  18. LOGO For Excel

    progpro posted a file in Demo Software

    Version 1.0.0

    23 downloads

    LOGO For Excel allows you to retrieve, view, log and write data to one or more Siemens LAN connected LOGO! 8 basic modules using Microsoft Excel without the need of a touchpanel or any other hardware or driver. Configure in no time Excel spreadsheets that contains live LOGO! data.
  19. View File LOGO For Excel LOGO For Excel allows you to retrieve, view, log and write data to one or more Siemens LAN connected LOGO! 8 basic modules using Microsoft Excel without the need of a touchpanel or any other hardware or driver. Configure in no time Excel spreadsheets that contains live LOGO! data. Submitter progpro Submitted 03/25/22 Category Demo Software
  20. New in box Siemens KSBLBDB circuit breaker sub-kit S5/SWBD OEM BUS SUB-KIT, BL/BQD 12-D-5649-05 For BL and BDQ breakers in a P5 panel. Quantity 60 available, all new in box. Some boxes have cosmetic shipping damage. Other Siemens PLC / HMI equipment available, a few OP070, ET200S modules, touchscreen IPCs, CPU200.   PM with your contact info to make arrangements.
  21. Hi Guys I have some issues with profinet configuration Siemens step 7 v5.5 Fanuc robot profinet card cp1616 I have 8 byte safety 16 byte DI16 byte DOI setup DI and DO. No error.But I have  safety comm error 1.1 I put Cp1616 at slot 0safety at slot 1DI at slot 2 DO at slot 3So far slot 2, 3 are ok, (no mismatch ) But safety are no ok, F number is matching between robot and plc side Is there’s anyone can help me on this, I don’t know what I miss. It’s the first time I am configure profisafe for robot Thanks  
  22. Hi All, need some advice on a system to Alternate Starting of 2 pumps:  1. When StartP is pressed, Pump No.1 would start. 2. By pressing StopP, it will stop the running pump. 3. When StartP is depressed again, the Alternate Pump will kick in. Am looking at using: I0.1 - NO Push Button I0.2 - NC Push Button Q0.1 Pump 1 Q0.2 Pump 1 to set it up.. Any kind advice how may i set this up? Any advice will be deeply appreciated. TYIA!  
  23. Dear Collegues, There are several links with discounts / promotions given below for you to join Siemens PLC / HMI / DRIVE trainings released by myself. I hope that will be useful for you to learn new topics related with your application field.  Also i will be glad if you share these links with your friends who needed, it would be helpful for me for sure to reach more people.  Siemens Simatic TIA Portal Programming 1 V17 https://www.udemy.com/course/siemens-simatic-tia-portal-programming-1-v17/?couponCode=584E8CA038C8EE7C8ADE 100 redemption limited / 30 days Free Siemens Simatic Manager S7 System and Programming 1 https://www.udemy.com/course/siemens-simatic-manager-s7-system-and-programming-1/?couponCode=8888E2A3A67D6917068B 100 redemption limited / 30 days Free Siemens Simatic Manager S7 Applications And Examples 1 https://www.udemy.com/course/siemens-simatic-manager-s7-applications-and-examples-1/?couponCode=A3D5633D7ADE64204100 100 redemption limited / 30 days Free Siemens Simatic Manager S7 System and Programming 2 https://www.udemy.com/course/siemens-simatic-manager-s7-system-and-programming-2/?couponCode=6183387F6558383C6D31 unlimited redemption / 5 days Best price Siemens Simotion System And Programming Course https://www.udemy.com/course/siemens-simotion-system-and-programming-course/?couponCode=A66B21332C52770D8C06 unlimited redemption / 30 days Custom discount Siemens Sinamics S120 Service and Commissioning https://www.udemy.com/course/siemens-sinamics-s120-service-and-commissioning/?couponCode=0BC89844A291C8C539D3 unlimited redemption / 5 days Best price with best regards. 

  24. Siemens PCS7 v9.1

    Awais Sattar posted a topic in Siemens

    We need to upgrade Siemens PCS7 V8.1 to PCS7 V9.1. Can we able to do so without upgrading the windows of the EWS/OWS. If Yes then How we can do it and If no then what is the replacement? Please answer that question with best of your experience. Thanks in advance. 

  25. Version 1.4.4

    22 downloads

    ASComm IoT for .NET 8.0, 7.0, 6.0, 5.0 & .NET Core. Class library for use in Visual Studio.NET to create HMI/SCADA apps that communicate with A-B ControlLogix, CompactLogix, Micro800 Series, PLC5, SLC500, and MicroLogix PLCs via Ethernet. Does not require OPC, Siemens or 3rd party drivers Visual Studio.NET 2017, 2019 and 2022 compatible All .NET 8.0, 7.0, 6.0, 5.0 & .NET Core 3.1+ targets are supported, including Web, Windows, console, and service apps. Runs on Windows, Linux & Android Extremely high performance - 5~10 mSec typical transaction time Supports reading and writing entire UDTs and PDTs Abstract base classes allow you to write generic code that works with all drivers Synchronous and asynchronous read/write methods Data change notifications Provides common user interface across all driver classes No limit on number of devices or data points Multi-threaded for high data throughput Includes extensive help system Example applications with VB and C# source code included. Easily connect office systems to factory floor. Runtime-free for qualified applications