Search the Community

Showing results for tags 'sfc test file; cant call an stl written add-on from sfc main program'.

  • Search By Tags

    Type tags separated by commas.

  • Search By Author

Content Type

Find results in...

Find results that...


Date Created

Last Updated

Filter by number of...

Found 112 results

  1. Sysmac Studio

    RobertoFonte posted a topic in NJ Series / Sysmac Studio

    Hello ,  Is my frist project on Omron and also on Sysmac Studio .  I have one PLC NX1P2 - 9024DT1 I write a sample program on ST with internal variable ( struct ) but i receive an information that i dont have permition to write on Var  Ps.  I can uploaded file with image   

  2. FX-2NC-32MT PLC program Download

    Sohel.ahmed.uk posted a topic in Mitsubishi

    Hi, There are two machine in the factory controlled by Fx 2nc PLC. One machine control part is not working. It could be for battery failure. But the other one is working properly. In this case can I change the battery?  After that,  is it possible, I upload the program from the good machine PLC and download it to the other machine PLC? Regards Sohel Ahmed
  3. Hello, I have some files for a piece of equipment but do not have the RSlogix software to view the code. It is for a SLC 5/02 plc. Would anyone be willing to convert the files to pdf for me, it would be greatly appreciated. Thanks in advance! 2730-AR14.RSS 2730-AR10_BAK494.RSS 2730-AR10.RSS 2730-AR9.RSS 2730-AR7.RSS 2730-AR15.RSS
  4. Hello, We have a FX3G connected to a FX3U-ENET-ADP inside a main cabinet. We are then using that master PLC to collect data from 2 other fx3g plcs in a node:node serial network. I was assigned a small project of pricing out some wireless adapters so we can upload/download to the two slave plcs. My question is, is it possible to upload/download programs to/from the slave plcs through the ENET adapter and serial network in the main plc? It would save us some money if possible. thanks.
  5. Hello all, is anybody out there who may read out a program that is stored on a telemecanique cartridge (more or less of 1993)? Program is still running on a TSX 47 40, but have an identical second cartridge. I would send it to him/her even if international post and do not necessarily require the cartridge back. Would be great to have the program as a text file / pdf / hardcopy. Any help appreciated!! Best regards Stefan
  6. I am looking for how others have set up vertical axis motions using the Kinetix 5700 servo system. I have a 2 axis pick/place unit with a horizontal axis (X @ 2500mm) and vertical axis (Z @ 1200mm) that works as designed during normal operation. X axis has no holding brake and Z axis has a factory installed 24vdc to unlock brake. There is a GuardLogix L81ES control system that handles the safety and control. On pressing E-stop/opening Gates the vertical axis will stop the motion, apply the brake and hold with no problems. (2198-D032-ERS3 Drive, 2198-P031 Bus Power, MPL-B430P-MJ72AA X Axis, MPL-B330P-MJ74AA Z axis) The issue that I ran into was an accidental download of the program without activating the e-stop and the vertical axis dropped unexpectedly when entering program mode on the processor. I am aware that this instance was my fault as the programmer, however I am also concerned that this might occur again in the future if the controller ever enters fault mode or someone else completes a download. I have done some investigation with the "ProgrammedStopMode" parameter on this single motion axis and attempted all 5 options and the vertical axis still has a free fall drop for a second before the brake grabs hold - so evidently this is not working for me. (Page 24 of Vertical Load/Holding Brake manual - https://literature.rockwellautomatio...t003_-en-p.pdf) I am curious if there needs to be something done elsewhere as the X and Z axis are set up as coordinated axis? I also am unaware if I need to preform some action/parameter with the bus power supply for this? The current state of the machine as it sits now is preforming a MSF in manual mode after 5 seconds of inactivity or 30 seconds in auto mode. This axis is usually in demand every ~22 seconds. This will shut down the axis after preforming a brake test on the vertical load and seems to function OK, however it is still in the back of my mind the issues mentioned previously if we ever enter a controller fault while indexing. Thanks for your insight
  7. Folks, we have a set of Mitsubishi Q12PRHCPU (redundant) running effortless since many years. CPU-A as standby and CPU-B as Control. Recently we noticed BATT low alarm on CPU-B. So we arranged for a spare battery Q6BAT and started the procedure as per manual(attached procedure and flow chart). We did memory copy from Control to standby (as prescribed precaution) and did the Reset of Standby PLC CPU-A. Memory copy from B to A completed successfully 100%. But the BACKUP LED did not turn Green from Red & Error LED kept flickering on standby CPU-A. CPU-B remain in Control but backup LED turned RED. From system monitoring we found that there is a Error 6000 (FILE DIFF.) observed in One of the .QPG (program 00-MDBUS.QPG). We tried to reset it but were not successful. We are surprised that why does the program differs when it was copied from CPU-B to CPU-A using the memory copy. Still we did the VERIFY and found no difference between the programs in CPU-A & CPU-B.  Can anyone explain the cause of this issue and the solution. Please note that the CPU-B is still in control and plant is running. Backup LED on both CPU are red which means (redundancy loss) and error LED on standby CPU-A is flickering RED. There is no error in the CPU-A (Control) -we checked this using the GX Developer. Also attached here are the image of the error and error help. Thanks in advance. Battery Replacement procedure.pdf Battery Replacement procedure-Flow Chart.pdf Error.pdf MELSEC QCPU ERROR CODE 6000 FILE DIFF.pdf
  8. Hallo everyone, i have a logix5561 PLC wich control a pumpsystem. The Pump is driven by a linear Motor. I need to perform frequency tests on the system. So first of all i  want to know how i can generate sine wave with this controller? I google it but didn't find any valuable information.   Can i perform such tests without additional hardware?  thanks for your replys! 
  9. Hello, I'm trying to execute the loopback test on the RS-422 built-in port of GX3GE-40M. I connected the TxD pins to RxD pins (+ to +, - to - ). I'm trying to use the function rs2 (later the plc should communicate with a bar code reader). I have tryed all possible connections, to see if the PLC can read the signal as well as transmit it. It manages to transmit the signal, but I cannot get it to read it. Could someone help me troubleshoot if the problem is in the program portion?  I'm working in GX Works2 Thanks for any and all help test_plk.gxw

  10. What Is a PLC Communication Error?

    ananyagupta posted a topic in Other PLCs

    PLC doesn't respond to communication requests or responds negatively to such requests. A PLC communication error can occur between the programmable computer and the devices it controls or when the technician attempts to program the device. If anybody have idea then share i am fresher now i learn it from CETPA INFOTECH. I think this is the best place to ask.
  11. Pls any one help me to simulate my omron HMI program with CPM 2A PLC  Means help me to communicate cx designer with CPM 2A plc Or with NT- series  support tool
  12. hello every body.  I want to upload program from  HMIGXU3500 . I have  Vijeo Designer Basic v1.0   software Is it possible to upload program from this HMI.? I want to have back up file 
  13. Sorry if this is covered elsewhere, but my search hasn't revealed anything yet.  I have a number of PanelView graphics created with FactoryTalk View ME and some use a lot of Parameter Files, which link to popup faceplates. So a large number tags are represented with parameter files, which, when clicked on screen, then pop-up an appropriate faceplate, based on tag type or category etc.  I am still digging into the very elaborate FT View ME manual, but at 500 pages, that's quite a deep study.  But I don't see the linkage between the tag's parameter file and how it specifies which faceplate to pop up, and I've not yet found a good article other than keep digging into that FT manual. There does not appear to be a linkage entry in the parameter file itself, where I would have expected it.  Nor do I see any "hot spot" click type event code in the display itself, which would also make sense.  Is it in the PLC code itself?  I would not have expected that, since they seem to be keeping the FT environment self-contained. But there must be some sort of table or linkage somewhere that I'm over looking. Thanks in advance for anyone's thoughts & guidance on this.  Other parts of FT HMI screen development does seem intuitive, just not this dynamic linking.
  14. Hi all, I'm enhancing an Ethernet IP driver but only just learning the ropes in terms of Allen-Bradley PLCs. I'm presently focussing on that part of the driver which specifically supports SLC/500 & MicroLogix 1400, for which I have one controller of each type for testing purposes. I can already cater for a range of standard file types: integer, float, binary, input, output, string, counter, timer, control, status, and this is working well. However, by working with RSLogix500, I can see that there are other data file types which can be hosted in these controller types (dependent on model) and, indeed for test purposes, I have actually created instances of them as follows: ASCII (at A21, 20 elements) for both SLC & ML1400 Long (at L22, 10 elements) for ML1400 Message (at MG23, 8 elements) for ML1400 PID (at PD24, 4 elements) for ML1400 Programmable Limit Switch (at PLS25, 3 elements) for ML1400 Routing Info (at RI26, 3 elements) for ML1400 Extended Routing Info (at RIX27, 3 elements) for ML1400 Now, the driver obviously uses standard DF1 PCCC data types (see below) to read/write individual elements/sub-elements of the file types that I can already support -- and I can see that there's a file type listed below for ASCII. •80 to 83 hex: reserved •84 hex: status •85 hex: bit •86 hex: timer •87 hex: counter •88 hex: control •89 hex: integer •8A hex: floating point •8B hex: output logical by slot •8C hex: input logical by slot •8D hex: string •8E hex: ASCII •8F hex: BCD However, my question is this: since there are no hex file types corresponding to non-elementary data types such as L, MG, PID, PLS, RI and RIX, what file type do I specify in my DF1 PCCC packets to read/write the elements/sub-elements of these six data types ? Thanks in advance.
  15. In my research on NJ processors and 1S servo programming, I came across an HMI graphic that I would like to use.  There was a file download that I think had something to do with it..."Machine.IAG"..but I don't know what an IAG file is and if it even has anything to do with an NA5 display.  Is it a Graphics file I can load into my HMI program to use?   Thanks,

  16. mitsubishi PLC R series

    kaviraj posted a topic in Mitsubishi

    I have R16 PLC (firmware45) and SD card(2GB). Can any one help me to create CSV file in SD card.I need to Logg the data of D0-100 when the M0 trigger bit goes high. can any please help to creat  ladder for this. it will be really helpful.

  17. Program lost after battery replace

    Antonio Tavares posted a topic in Mitsubishi

    We think so we lost the program after a battery replace, because the program isn´t loaded on GOT. Is it possible restore it by the PLC?
  18. This course is designed to equip the novice with no prior PLC programming experience with the basic tools necessary to create a complete PLC program using ladder logic common to most current platforms. Use Software : - Somachine EcoStruxure Machine Expert Basic - Free - Vijeo Designer Basic Full Articel About Lear PLC Schneider  Video Tutorial Learn PLC Training Free

  19. How I open file bin ihm fuji UG 530h ?

    Fabio Medeiros gomes posted a topic in Download Comments

    I need help, I want modification ihm fuji UG 530h , the upload file bin, I am use software VSF edit V6.0, but not open.

  20. Omron CSV FILE

    Mesut ŞEN posted a topic in CX-Programmer

    Hi Everyone.I want to read the csv file to plc. How can I do it. I will use to NB 5Q-TW001B for hmi.  PLC model : Omron CP1L-E

  21. Granite Line Polisher Machine

    Indiajay posted a topic in Mitsubishi

    Hello friends, I have been working on Granite Line polisher machine. I have completed the program but there is a requirement for polishing the Uneven shape of granite slab. Has anyone worked on logic of this machine? Can anyone give some idea for the logic or the Plc program. I have seen Chinese machine manufacturers giving this feature. 
  22. Can I download program to FX5U By SD card ?

  23. simotion MMC img file

    navidentezari posted a topic in Siemens

    Hello I have a SIMOTION MEMORY CARD 16MB for C230-2. Order No: 6AU1700-0AA01-0AA0 That formatted with windows. I need image file from Simotion MMC 16MB for write to This MMC with s7 img writer. Someone can help me. Thanks.  s7imgrd2.zip s7imgwr2.zip
  24. I'm attempting to make a backup of a program, complete with comments. I go connect to the PLC over Ethernet, and select Use Upload File to merge the comments from an original copy of the program. After that, I go file-saveas to backup the program. However the new saved file, complete with comments is only 134 KB, and the very original copy of the program is 230 KB, from 2003. Is there a reason for this, the program hasn't shrunk in size, only minor tweaking of some span calibration numbers.
  25. Hello,, I have motion controller A series A172SHCPUN,, I have written the program ladder into the CPU, but I can't write the motion program.. i dont have the program to open file the program motion and I want to ask if I have the software SW3RNC-GSVE, my os computer is window XP, Can it be installed? and is the cable transfer used the same as the ladder transfer program cable (SC09)?