Search the Community

Showing results for tags 'servo motor errors'.

  • Search By Tags

    Type tags separated by commas.

  • Search By Author

Content Type

Find results in...

Find results that...


Date Created

Last Updated

Filter by number of...

Found 144 results

  1. Is there a way to change the parameter of a mitsubishi mr-j3a using fx3u plc?  Need this to change the pulse output of a master servo amp to change the pitch of the other slave servo amplifier. 
  2. I am trying to connect a Delta ASDA-A2 Servo internal motor encoder to a Delta DVP28SV high speed counter input.  I was successful in connecting the servo to the plc on position mode with an external encoder connected to PLC high speed counter.  Currently having trouble in finding the correct wiring between the servo drive and the plc to count the pulses from the internal motor encoder.  Attached are some figures from the servo drive manual. OA --> X0 is obvious, tried s/s to GND, COM-, VCC and VDD... no result. Any suggestion would be highly appreciated.  
  3. Hi Guys! I have a problem with Motion axis move (MAM) command. There is an Allen bradley servo motor what is working well. But I need to add a new program section, wich is in  a specified moment, the axis should move a certain distance. I think I need to use the mam command, just I dont know how can I configure the motion control part. I need to make a new tag ? or what ? I need to use a user define ? PLS help me.   
  4. Gx Works 2 ve fx2n için bir fonksiyon kütüphanesine ihtiyacım var. Servo ve step motor kontrolü için.   thank you
  5. Hello, I have a cp1h-y20dt-d (sinking output) plc supposedly to be wired to a servo controller. The pulse control method is Pulse/Direction. I've did some manual research on the PLC and found the following diagram attached Untitled. Since the diagram above doesnt show which terminals does it connect to in the CP1H side circled red, I want to ask if those connections belong to the following diagram attached Untitled1? If so, assuming im planning to use only Pulse Output1 (Pulse/Direction method) from the PLC side, is the connection from the first diagram no.1=CCW0- , no.2=CCW1- , no.3=COM (connected to -ve) *Note: these diagrams are from omron's manual SYSMAC CP Series CP1H-X40D_-_ CP1H-XA40D_-_ CP1H-Y20DT-D CP1H CPU Unit Your replies would greatly help. Thanks and best regards, Summer
  6. I have 200W - 200VAC : Omron R88D-1SN02H ECT Servodrive and Omron R88M-1M20030T BS2 Servomotor I wish to make myself the connection between Drive and Motor , with self made cables. Connectors ( JAE ) - Japan Aviation Electronics JN6FR02SM1 - 2 pins - brake cable in motor side JN6FR07SM1 - 7 pins - encoder cable in motor side JN6FS05SJ2 - 5 pins - power cable in motor side Molex 55100-0670 - 6 pins - encoder cable connector in drive side - ( IEEE 1394 - Firewire 400 ) https://assets.omron.eu/downloads/manual/en/i823_1s-series_setup_manual_en.pdf http://multimedia.3m.com/mws/media/569007O/3mtm-i-o-interconnect-system-2-0-mm-for-ieee-1394-ts2296.pdf http://www.jae.com/z-en/pdf/MB-0161-1E_JN6.pdf https://industrial.omron.mx/es/media/I586-E1-02_1S-Series_EtherCAT_UsersManual_tcm851-112757.pdf ======================================== How can i know which it's pin #1 from each socket from Drive and Servomotor ? Atention !!! I'm not talking about pin numerotation from connectors which i connect to drive or motor . I wish to know the pin #1 from Drive CN2 socket and from Motor sockets ( power , brake and encoder ) http://www.jae.com/z-en/pdf/MB-0161-1E_JN6.pdf In MB-0161-1E_JN6.pdf you can see the numerotation of pins from "Receptacle" . That means , the "Receptacle" it's that part what is in Omron Servomotor ? Or it's the part of JAE connectors , which it's inside of connector housing ? The question is , how can i be sure i don't make a mistake, and i know the right numerotation of Encoder socket of Omron Drive : CN2 and the right numerotation of Omron Servomotor ( brake , power and encoder cable ) I've found schematics about how to connect the Drive with Motor with power , brake and encoder cables , but i didn't find a pin numerotation of sockets ( drive side CN2 encoder socket and power , brake and encoder from motor side ) I didn't find nowhere the right numerotation of pins from CN2 socket of Drive and from Servomotor sockets ( i find it something from above JN6 series connectors from JAE connectors ) I wish to know where can i find the numerotation of pins from Omron R88D-1SN02H ECT Servodrive and Omron R88M-1M20030T BS2 Servomotor Specially , the Encoder cable numerotation from Drive side and Motor side . I've noticed in attached picture the numerotation from Drive , CN2 encoder socket ( IEEE 1394 - Firewire 400 ) . That's correct ? It's right numerotation ?              
  7. I have project where I need to measure motor current but I do not need to control the speed of the motor since it would always be running at full speed. Do I still need to use VFD to get feedback or is there cheaper way to measure the current?

  8. mrj4

    acad posted a topic in Mitsubishi

    hi all, anyone can hep..i use servo mr j4.. now got error 121..anything can help..i read from manual error code but cannot understand..
  9. Hello, I want to connect the Siemens PLC S7-200 with MR J2S 350CP using Serial communication (RS232/422) so, is it possible or no , any one have an idea... Thank you in advance  

  10. RC servo motor sg90

    Ong posted a topic in CX-Programmer

    I new to the Cx-programmer. I'm facing a problem where i need make the servo motor go to certain direction and stop at the direction until other signal is sensed. Is there any instruction which can be used to do the ladder diagram? is it using PWM instruction? Is my servo motor (sg90) suitable for PLC ? do i need motor driver for this servo motor? or i just have to connect to the PLC 5v ? Im using CJ1M CPU21 PLC module. Im doing a sorting system project that use the servo motor to slide the item to certain angle. 
  11. Hello everyone, Is there any way to communicate with Mitsubishi Servo amplifier MR-J2S-350CP through RS232 ,I prefer to use 224XP because i already have it... thank you 
  12. I know it may sound stupid but I am new with Studio 5000 and trying to build a project where I have to home my servo drive other than the position to zero and it is not fix but rather decided by a safety switch. What I am looking for is a dynamic Home position Entry which I am able to find it in the axis parameter but not in the CIP_Structure. Is any kind of motion FB for home position set entry? Any help would be useful. Thanks PS: Studio 5000 v30, Kinetex 5500 v7.01, L33ERM processor

  13. Servo Motor Tuning

    KCRP posted a topic in Mitsubishi

    Hi i am new to Mitsubishi servo drives, i want to know how to Tune the Mitsubishi (MR-JE-A-200w) servo drive Can any one guide me please  
  14. Looking for some servo application help. Software: I have GX works 2, GT Designer, and GX Developer.  Hardware: PLC L06CPU-P, GOT2000 HMI, MR-J4-350B servo amps, HG-JR35JK motors, LD77MS2 Pulser I have (2) AC servos that will simply move an aluminum frame backwards and forwards using a FESTO belt mover and I have a servo gear reducer 20:1. I have a "simple motion module"and all of this hardware and software, plenty of time, and would really like to finish this project off. But this is my first servo and my first hmi project. I have some experience with Omron, Mitsubishi, and Allen-Bradley plc's, and consider myself novice at best. Any sample programs or help getting me started would be greatly appreciated!  
  15. I've been building a contraption with linear rails and stepper motors. It has an X, Y, and Z axis. I'm using Velocio PLCs to control the motors which seems to be work well so far. I understand these are not very common and my question are related to general motion control, not Velocio programming specifically. Since I'm new to PLCs, programming, and stepper motion I thought I'd ask for some input instead of trying to reinvent the wheel. I'm to the point in the build where I'll be adding emergency stop/limit switches and am wondering how to go about writing the program; if there's an "industry standard" way to go about it. I figure the PLC will check to see if any switch is active. If one is, drive the motor away from it till it's inactive and store the location. If one is not, drive the motor until a switch activates then back off a until it's inactive and store the location. Drive the motor to the other limit of the axis (the number of steps should be known) to activate the switch, back off and store location. Rinse and repeat for the other axes. Is my approach about right?
  16. I'm looking for some general information about different types of vibration/temperature sensors. What type, brand, model number, etc. will best fit my application.  Scenario: I want to monitor the vibration and temperature of multiple motors and gearboxes for a large overhead conveyor system. If an oil leak occurs and temperature increases, I want to see a temp. alert via a HMI. If a something mechanical fails, I want to see a vibration alert via a HMI.  I've looked into sensors that stick to the outside housing of the motors or gearboxes via a magnet. My concern is justifying the temperature readings. How accurate would a sensor that reads an "ambient" temperature be (compared to a thermocouple on the motor coil itself or some sort of probe)? Also, would the location of the magnet  on the motor or gearbox drastically affect the temp. or vib. readings? Has anyone had success with a similar setup? If so, what devices did you utilize? Are these systems truly beneficial?  I'm currently considering Banner's wireless products...
  17. I am searching for the Replacement of the Ultra 5000 Servo Drive as i cant get online to it with the Ultraware software over wireless plant network. In order to get online i have to connect serial cable every time. And the Drives are used in time critical assembly line  kind of environment. So is there any other replacement which works as intelligent as of Ultra 5000 and also have additional feature of built in Ethernet port which can help me to get online with it wireless over plant network.

  18. Omnuc U software

    Geir posted a topic in Other Omron Software

    Hi, I have begun to look into some positioning equipment we have had for a while. There is a CQM1 CPU51 connected to R88D-U series servo drives, and a CS1 with C200HW-NC113 and a R88D-U. I have found WinMon on myomron, but not tried to install it yet, will it run at all on a Win7 machine or do I have to dig out some older PC? Same with the NC unit, there is mentioned a SYSMAC-NCT program in the manual, but I have not been able to find this anywhere, Is this still a commercial item? Are there any newer software that will communicate with these old units? If we decide to upgrade any of this, will we have to replace all, or is it possible to reuse the servomotors or other parts? This is all for educational purposes, no production or safety issues involved. I would of course like my students to work with the most updated systems, but unfortunately we are on a limited budget :( Geir

  19. Version 1.0.0

    560 downloads

    This is a very simple ladder program that shows the basic steps to enable, zero and move a 1S servo using the NJ controller.
  20. View File Basic Servo Control Code for NJ and 1S This is a very simple ladder program that shows the basic steps to enable, zero and move a 1S servo using the NJ controller. Submitter Michael Walsh Submitted 02/10/17 Category PLC Sample Code
  21. hi all master mind   I m irfan from Pakistan   I want to drive servo motor with plc Mitsubishi fx3g.friends how create the A.pulse and B.pulse in the programming ladder for servo Drive. respected masters solve it problem with thanks
  22. Hello All, I'm in the process of tuning a motor and I understand almost everything that is happening.  The only thing that doesn't really make sense is how frequency relates to the speed of the motor.  For instance, let's say my 3db point is at 100 Hz.  I understand that from 0 to 100 Hz my motor is stable.  If I have a 3000 RPM motor, how does 0 to 100 Hz relate to the maximum speed I can run the motor and still have precise positioning. Thank you
  23. Which one Baldor Motor is best for Industrial purpose like food processing?? Please suggest .

  24. widadi

    widadi posted a topic in Mitsubishi

    does anyone can help how to connect plc fx2n-16mt with servo drive mr-j2s-40 and motor servo hc-kfs-43 ? please give me wiring schematic thanks a lot
  25. We have a Panelview Plus 600. One of our panels is labeled "Motor Control," in charge of turning on/off different pumps. The problem is while the system is running, clicking the on/off button will not turn any pump off. When the system is shut down, the pumps can be turned on and off but not when the system is running. I'm trying to shut off one pump without shutting the whole line down. Any help is appreciated. Thanks.