Search the Community
Showing results for tags 'serial number'.
Found 96 results
-
How to conduct a Change or a reset of Gmail Password?
Miley272 posted a topic in Computer Help and Networking
In order to conduct a change or a reset of the password, the user should follow the given steps- • Open your Google account in order to sign in. • Then under the security section select signing into Google. • Then select a password as you will have to sign in again. • Then in the field enter your new password and then click on “change password” and if you need any sort of further help connect at Gmail Support Number UK -
ok running into a issue here, so we were able to communicate with the processor to download a program. transfer went fine. upon cycling power, we can no longer connect to processor. we used LM90 for the software. i've tried removing the battery and shorting out the "mem clear" points on the board, however we can no longer communicate with the CPU. we have a POWER and OK light solid on the power supply. kinda stumped here if anyone has any insight.
-
Two FX3U-485ADP-MB One Modbus Master and Other as General Purpose Serial Port
ritz2610 posted a topic in Mitsubishi
Is it possible to use FX3U-485ADP-MB as a serial port to send and receive user defined string/data to and from a computer? I have a FX3U-32M PLC and two FX3U-485ADP-MB adapters. I have been using PLC with one adapter as Modbus Master. Now i want to use both adapters, where one will be Modbus Master as usual and the other I want to use to send and receive data to and from computer terminal (Example - Realterm). I have a third party 232/485 converter which works really well. Lets me just describe my requirement straight forward. I want to display process parameters on a windows computer based user interface (UI) and also set some variables in PLC from the same UI. The UI has access to serial ports of computer. -
Why am I receiving a Gmail verification code without requesting for it? There can be multiple reasons for you receiving a verification code without requesting for it there is a possibility that someone who knows your Gmail ID is trying to get an access to your Gmail account or if you are trying to log in your account with a new or an unauthorized access, Google will always send you a verification code if you will open your account on a device on which you have never opened it before you will also receive verification code whenever you will enable 2 step verification for your Gmail account.
-
OMRON CP1E communication with ESP8266/Arduino/PC Terminal using Serial RS232C OR USB
Chinmaygarg posted a topic in CX-One
I have OMRON CP1E PLC and I want to read memory address of PLC via serial communication. I want to use ESP8266 OR ARDIUNO OR PC Hyperterminal Please help me in any direction. How I should proceed? -
Hi, totally new to PLC's .. Just trying to do a university assignment I've connected a DTC1000 to Fatek PLC Port 2 - RS485 I want to know in which register I can find the measured temperature. A friend said you should add 400000 to the converted from hex to dec number which is mentioned in DTC manual. http://www.deltronic.su/userdata/files/dtc_manual_eng.pdf But I'm not sure which value should be used in manual and is 400000 the number to add (and where it has come from!) If I can just find the register, I can do the rest (just a bunch of normally open and close and .. Thanks
-
Hello, i'm newbie for plc. i want to ask about PC/computer send data to PLC CP1E with serial communication (RS232). my wiring cable is: PC PLC 2 2 3 3 5 9 4&6 7&8 4&5 and if i send data from PC to PLC, my indicator in COMM is blinking. i think the cable have no problem. but if i send data from PC to PLC, the memory is not same as what i send and whatever i send data, the memory didn't change. i will attach my ladder diagram. what should i do? New folder.rar
-
Hello everyone! I have problem with understanding the usage/principle of operation of parameter "Mark detection number". In manual i read: "The number of mark detections is stored. "0" clear is executed at power supply ON. Continuous detection mode: 0 to 65535 (Ring counter) Specified number of detection mode: 0 to 32 Ring buffer mode: 0 to (number of buffers - 1) Refresh cycle: At mark detection" My question is which mark detections are stored? Servo detects some kind of marks? I am novice in servo programming, please explain in the easiest way. Thanks for help.
-
Hello every one. I have three FX3U plc needed to be communicate over a wireless network. I'm using serial adapter FX3U-485ADP. I got E-byte data trans reciver E-30 for wireless communication. Now need help to setup the whole thing. Previously the PLC's serial connectors were connected through a flexible bus but when the platforms are running fast there is interruption in the communication. So we want those PLC's to be connected over wifi. Thanks in Advance
-
Here is a link to a thread on a recent post showing how to communicate serially to an Omron PLC using VB.Net. This uses the Omron Host Link serial protocols. (C-Mode Commands) It will read 10 DM registers and display them on the form. http://accautomation.ca/implementing-the-omron-host-link-protocol-vb-net/ Here is the source program that can be downloaded. Other links: VB6 Program: http://accautomation.ca/how-to-implement-the-omron-plc-host-link-protocol/ VBA Program: http://accautomation.ca/how-to-implement-the-omron-host-link-protocol-part-2-vba/ Regards, Garry www.accautomation.ca
-
Hi, I have a self-bought usb-serial cable converter for CP1E. Currently can't connect to my PLC using PC. CX-One says "Failed to the PLC". I am supposedly to use "SYSMAC WAY" as my Network Type in PLC settings? EDIT: The CPU type is N30 I've checked the following settings: 1) COM number is correct ( as checked from windows Device Manager side) 2) Cable driver is installed, there is no "unknown" driver in my windows Device Manager 3) My RS232C LED in PLC is not lighted up. Any other suggestions to check settings ive missed out would help, other than buying a new cable for the moment. Regards, Summerstone
-
Hello, PLC: NX1P Comm module: NX-CIF105 I am running a serial (RS485) network to control several motors. As a trigger for to read the serial port I am using the ( Ch1 Receive Data Exist) bit, which is an internal bit that's ideally should be energized when there's data in the Receive buffer. However, this bit isn't reliable at all. I am reaching out today to figure out if there's another way to trigger the receive command ( preferably without a delay) thank you all Cheers!
-
Hello All, What are the methods to get the monitoring data from A series PLC? I know its not supported any more, interface modules are not available..., So the basically, If I want to write customer software (may be embedded) what is the protocol I need to follow? I am connected to CPU unit by the way, there is no other modules except few digital and analog interfaces on PLC. Thank you in advance for your direction, direction in any way would help!
-
Hello write now i am working with Q6UDEH PLC project in which (nextgen 2000) 6021 card is used for conversion of serial to Ethernet data & vice versa , is it possible by only installing the Mitsubishi serial drivers ?? or can anybody tell me how these Mitsubishi serial drivers works ??
-
Hello write now i am working with Q6UDEH PLC project in which (nextgen 2000) 6021 card is used for conversion of serial to Ethernet data & vice versa , is it possible by only installing the Mitsubishi serial drivers ?? or can anybody tell me how these Mitsubishi serial drivers works ??
-
Morning Guys, For my latest project I need to read a gas sensor via 485 from a Momentum PLC. I've been through the help files, but they seem to only raise more questions than they answer, they only seem to reference PLC -> PLC comms. I've had a play with the 'MBP_MSTR' & 'OUT_IN_MBUS' function blocks, but i can't seem to get anywhere, Has anyone got any examples of reading in data via 485, or can anyone lead me in the right direction?
-
Hey guys I don't have much experience in PLC serial communication and I'm tasked to integrate 6 OP-905 scales with our EATON based control system. The scales are rs485 asynchronous serial communication, my concern is that if the device is not designed to be an RTU then I cannot use modbus. And if that is the case how do I talk to multiple scales using the async protocol. Has anyone done this in a similar platform?
-
We recently obtained a new Vendor ID (VID) Number from ODVA, 1477 for the purposes of developing an EtherNet/IP scanner device. When we try to use that number with the Allen-Bradley PLC & Studio 5000 Logix Designer, our data type REAL's are showing up in Studio 5000 as SINT's. We have seen this mangling of data types before when using the Omron VID, 47 with the same Allen-Bradley PLC/EIP Scanner. The data types are being misinterpreted, or mangled from REAL to SINT, e.g. the *.eds file defines 32 REALs for Input and 32 REALs for Output, but within Studio 5000 we see 128 SINTs each for Input and Output. It is as though the Allen-Bradley/Studio 5000 database does not have our Vendor ID. When I change the *.eds file, Vendor ID Number from #1477 to #1 then we see the *.eds file being properly read and interpreted, e.g. 32 REALs for Input and Output show up as 32 REALs each. Does anyone know what file we need to modify in Studio 5000 ??? We want to add our Vendor ID #1477 to that file. Hardware: EIP Scanner: Allen-Bradley Compact Logix L18ERM EIP Adapter: Delta Tau Power PMAC Motion Controller (EIP OpeNer Stack) Thanks in advance! See screenshots below. within Studio 5000, see screenshots
-
Help Needed....GE Multilin EPM 5500P Power Meter Interfacing to GE Multilin EnerVista.
soms posted a topic in GE
Hello, I need to communicate Power meters ( GE Multilin EPM 5500P) to GE Multilin EnerVista Software. The present communication system uses Ethernet for communication from LAN Switch to Computer. There are a few existing Power Meters which need to be connected to the Network. The Meters having output ports as RS485. I need to use a convertor for that right. So when I contacted GE they told me to use GE Multilinet Serial to Ethernet Convertor. But due to the price and unavailability of the material I am thinking to use a universal convertor. Is that compatible for Multilin Devices?? and In Case of using a universal Convertor does we need any other drivers for that. Please Help Me.. Thanks In Advance mnetman-a3.pdf multinet (1).pdf PM-GE.pdf -
Hello everyone, I have difficulty to setting up the GSM configuration or the serial RTU configuration so that I allow you with another RTU. I use Schneider CPU Modicon M340 in conjunction with RTU communication NOR0200H and a Modem Schneider SR02 MOD02. This is the first time I'm working on this kind of project, want to help me, I'm stuck and I need a solution, thank you for your time. -
Hi to everyone, I have done an intense search on the web and this form, also went on to the download section here to try out a simple RS232 program, so far I can't get it work. Long story short, I am working on a PLC CP1E( w/ built in RS232) to communicate with the PC hyper-terminal . PC will send a string of messages to the PLC, then the PLC will convert the message to a pulse parameter, eg. computer will send ( 90, 40) to PLC, then the PLC will take the string 90 to pulses parameter( PLS2) and 40 will be the duration period. I am willing to learn and try out your sample program, let me know! THank you in advance.
-
hello everyone, I'm trying to connect PC with Micro830 with RS232 cable for transfer serial data. However, the PLC can not receive the character from PC. I used ARD function block to read the characters from PC. there is no error and the output of ARD function block is 0 when I debug ladder programme. the serial communication state LED illuminated once I send a character from PC to PLC. the channel of input is 2 which is the embedded serial port. I use an adapter from USB to RS232. Email: jeremietang531@gmail.com
-
NS-Runtime Time out error while.....
Chrisdude posted a topic in Allen Bradley / Rockwell Automation
Hi all. Firstly, I am not a programmer, I just need advice. We have HMI's using NS-Runtime and we keep getting this message. Now, this is why I am contacting you all. This has happened over 20 times on 20 different HMI's which we have replaced over the last 3 years. We have been told by our software supplier that the com port is "on it's way out". There is NO WAY over 20 hmi's over that period will deveop com port faults. So my question guys, can someone give me a few tips on what to try before I change HMI's over ervery dang mponth please? I am really at the end of my tether here. We connect our HMI's to the Omron PLC's via a standard serial. If we change to another HMI the machine communicates after obviously a long period of downtime. Should we reset the plc? I will take ANY advise please guys. -
Hi, I'm trying to test the serial communications with my Micro820. I acquired a 2080-SERIALISOL so I could have "someone" to talk to. I want to use RS485, so I figured that I'd have to connect: Modbus pin 1 (D+) to serialisol pin A1 (+485) Modbus pin 2 (D-) to serialisol pin B4 (-485) Modbus pin 3 (GND) to serialisol pin A2 (GND) Now when it comes to CCW, the thing gets a little harder. I know I need to use the MSG_MODBUS block (in fact I need 2, one for the modbus and another one for the serialisol), and I guess I specify the interface I'm using on the TargetCfg field (data type MODBUSTARPARA). But how do I figure out that the Addr (UDINT) and Node (USINT) values are for my Modbus and Serialisol? Or am I doing it wrong? Does anybody know of any place where I can get some more guidance or even a funcional ladder program? Thank you in advance
