Search the Community

Showing results for tags 'scu41 rs485 mod bus com'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 61 results

  1. Dear All   Sorry for my English I have Siemens CM1241 (picture attach) and need to communicate with Intellisys XE 90 via Modbus RTU, period. The problem is, form XE 90 the connector is Phoenix Contact 2-Position Screw Plug Connectors MC 1,5/ 2-ST-3,81 1803578,or in other word, only 2 contacts form P9 COM1 = L1 , L2 (picture attach). How we connect it to DB9 Female in CM1241? What signal go to what Pin? How about the Ground? Do I need Resistor?   Thanks for all your supports   Best Regards
  2. Hi dear I want control micromaster440 siemens with cp1l omron via rs485 Is there any one help me?
  3. GE PLC PCM

    The topic is based on "How to configure a PCM module in GE PLC". One new query in PCM. To configure this PCM Module some procedure is to be followed in CMD prompt. Initially once ''READY'' line displayed. Query to this topic is if ''READY'' line repeats below persistently in CMD prompt, then solution is ______???? 
  4. Hello guys, I have the following distribution in a profibus network: S7-315-2 DP(--> Salida del conector)1- Free DP connector2- RS485 repeater3- Periferia ET200S4- Periferia ET200S5- Periferia ET200S6- Periferia ET200S7- Periferia ET200S8- Variador MM440 (Cabinet C)9- Periferia ET200LENDS7-315-2 DP(<-- Entrada del conector)1- Variador MM440 (Cabinet A)2- Variador MM440 (Cabinet A)3- Variador MM440 (Cabinet A)4- Variador MM440 (Cabinet A)5- Variador MM440 (Cabinet A)6- Variador MM440 (Cabinet A)7- Variador MM440 (Cabinet A)8- Variador MM440 (Cabinet A)9- Variador MM440 (Cabinet A)10- Variador MM440 (Cabinet A)11- Variador MM440 (Cabinet A)12- Variador MM440 (Cabinet A)13- Variador MM440 (Cabinet A)14- Variador MM440 (Cabinet A)15- Variador MM440 (Cabinet A)16- Variador MM440 (Cabinet A)17- Variador MM440 (Cabinet A)18- Variador MM440 (Cabinet A)19- Variador MM440 (Armario A)20- Variador MM440 (Cabinet A)21- Variador MM440 (Cabinet A)22- Variador MM440 (Cabinet A)23- Variador MM440 (Cabinet A)24- Variador MM440 (Cabinet A)25- Variador MM440 (Cabinet A)26- Variador MM440 (Cabinet A)27- Variador MM440 (Cabinet A)28- Variador MM440 (Cabinet A)29- Variador MM440 (Cabinet A)30- Variador MM440 (Cabinet A)31- Variador MM440 (Cabinet A)32- Variador MM440 (Cabinet A)33- Variador MM440 (Cabinet A)34- Variador MM440 (Cabinet A)35- Periferia ET200S36- Variador MM440 (Cabinet B)37- Variador MM440 (Cabinet B)38- Servoamplificador E94AYCPM (Cabinet B)END What would be the best way to configure the network? As you can see I have more than 32 nodes in 1 segment and the RS485 repeater is not being used properly. Hope you can help me, Regards!
  5. Hi. I'm hoping someone can give me an answer on this problem I'm having with a FX3GE PLC. I am trying to get a FX3GE plc to communicate to a drive over RS485 using a FX3G-485-BD card. In GXworks2. But am having no luck.  I have tried changing the PLC communication settings in PLC parameters between CH1 and CH2, But am unable to get any communication working on the front port. I have also tested with a FX3G-232-BD RS232 card and have the same problems. There is no activity on the SD RD led's and no data being sent. If I put the FX3G-485-BD card in a FX3G or FX3S PLC I have running the same code it works fine. So the problem I'm having is with the FX3GE PLC Please can someone tell me what the difference is with the front Communication port on the FX3G and the FX3GE. And how I can get the FX3G-485-BD card working on the FX3GE PLC. Thanks
  6. 3g3mx2 rs485 cp1l-el20dr-d

    Hi Everyone: I want to comunicate 4 inverters 3G3MX2 through RS485 (modbus) to a CP1L-EL20DR-D.   I remeber that Omron has several FB to use between some PLCs and Inverters.  I wonder if Omron has developed a specific FB to communicate these models, and if it so, where can I find them. Any of you have knowledge or can provide me these FB?   Thank you for your support.
  7. PMCR with E5CN communication

    Hello all, I would like to read and write values such as Set Value and Process Value from the E5CN via the PLC with SCU41-V1. I have never worked with it before and have limited knowledge to get started. Could anyone please guide me through this? I know PMCR can be used to establish communication, but I am now sure how to get started with it. Also I've set the communication protocol in E5CN as Modbus. Please be kind enough to let me know. Thank you veryy much.   
  8. thesis project

    Hello, For my thesis i'm using a beckhoff cx9020,a sunnyboy and a sunnyisland with rs485 communication protocol sma net. One of the things I need to do is to log everything from the sunny devices realtime. and here is where my problem starts. I am using rs485 to communicate with the devices via plc but I don't find any documention for what i need to request or send to get usefull data. does anyone here have an idea? Yours truly Jonas Vanhulle
  9. FX5U Serial

    Need to communicate FX5U with Mitsubishi MS61-B HMI via Serial communication I have tried with Melsec connection and MC protocol in PLC RS485 setting Anybody please help
  10. 4 cpus cp1e and 1 hmi beijer over rs485

    Hi i want to connect all 4 cpus(cp1e 40s) to the hmi(beijer ixt10a) over rs485. I don't want the cpus to communicate each other, but i need all of them to exchange data with the hmi. How can i do that. Do i have to make master/slaves and from the polled plc to exchange all the data or if i don't set up anything in the plc's i can communicate each one with the hmi if i set the nodes to each plc and the hmi(for four controllers). I mean i will just wire them and set the hmi that there are 4 controllers, i will set node 0,1,2,3 and after set the hmi to these nodes. Is it going to be any problem between the plcs that aren't programmed to communicate each other and will be wired with rs485? Thanks