Search the Community

Showing results for tags 'schneider software needed'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 148 results

  1. PT property NB series

    hello everyone, I want to ask this setting. If I check this check box, what will happen to the program that I input into the HMI? can someone give me examples for not allow upload and not allow decompile?
  2. Siemens Logo PLC

    Hello Experts Can someone please tell me if Communicating software for Siemens Logo PLC is downloadable? Regards
  3. Ok I'll try a different angle of attack. I have acquired an S7-1212c unit. It is just too new for my TIA portal, which is V 15.1 The new PLC I have has firmwear 4.5 the TIA portal I have only supports 4.3, I get some errors regarding synconization etc. and it's like there are some tins that don't work. how do I update the TIA portal to the correct firmware I've tried updating the HSP files but it doesn't change anything https://support.industry.siemens.com/cs/document/54163658/how-do-you-update-the-hardware-catalog-in-tia-portal-?dti=0&lc=en-DE
  4. Hey there, we want to upgrade some of our old TSX87 PLCs to new Schneider M580. My boss gave me an order to make a plan. My basic idea is to only use a M580 processor and some communication cards. For the I/O we want to use some Beckhoff bus couplers. So we got the possibility to convert our old Grafcet to new ones via software by Schneider. But if **** hits the fan we only have to change the processor and can use another system like Siemens or Beckhoff without changing the I/O devices. My problem now is, that i don't know what bus i should use. I can't find many informations about the supported busses that the M580 is using or i can't find informations if a specific bus is working with it. I would prefer the Ethercat bus by Beckhoff. Can somebody say if it is working with the M580 processors or do i need to use some special communication card for it? Maybe someone used it already in this combination.   Sorry for the bad english. Greetings from Germany
  5. Hello! I am using PLC TM221CE16R and SoMachine Basic v1.6. My PLC has firmware 1.6.0.1. I use analog expansion bus, input module TM3AI8. Everything was working fine for 2 hours until suddenly I got next message in SoMachine Basic: I/O expansion configured but is absent or inoperative. I/O expansion bus is not started. Since then ERR LED is always blinking. I already tried deleting program, updating firmware, removing expansion module in configuration page, removing/adding physical module, selected module as Optional, removing battery - nothing helped. If I try removing application, ERR LED is still blinking. Seems like I can't delete previous program, something like config file is burned into PLC.  On the other hand: if I write some simple program, PLC works fine. It turns on/off relays correctly. Just expansion bus is not working. It is not working even if it's not configured or attached physically to PLC.Can anybody please help me? It is really frustrating.
  6. I have this hardware configuration of an extension rack for a M580 PLC projet using EcoStruxure Control Expert I export the.XHW file by following the procedure below: https://www.se.com/uk/en/faqs/FAQ000256454/ And I am trying to rename the DD1602 card using the file, however, when I rename the card as a show in the next image (selected in green), and re-change the file to the .XHW extension, when I re-import it into Control Expert, I get an error saying: unknown fatal exception, even though the only change I've made is to the name of the card. I know I can rename IODDTs instances manually in Control Expert, but in fact I'm trying to automate the process of renaming IODDTs because I have a lot of IODDTs to rename, which is why I thought of using the XHW file. Does anyone have an idea of what I could do? Thanks in advance
  7. Omron plc to Citect Scada communication

    Hi Guys, I need some suggestion & solution regarding my recent project. The CQM1H plc which was used earlier is burnt and I am replacing it with CJ2M series Omron plc. Program transfer is possible from CQM1H to CJ2M. But the main issue is the system is controlled by Citect SCADA version 5.50 pack C. The communication of plc and Scada is through 2wire twisted pair cable. I just wanted to know when I replace the plc and convert the program do I have to change any settings or parameters in Scada? If I keep the same previous plc parameter in new plc and check the tags correctly in new plc as per old plc then the new system will communicate with Scada? I am new to citect scada so please provide your support and help.
  8. Dear Experts We have a machine with Allen Bradley Micrologix 1400 PLC, Panel View C400 Request to share communicating software and cable details please  Regards
  9. I am working on project where we integrate Omron Microscan Barcode reader to Schneider M218 PLC to read Barcode text. In Microscan we enabled TCP/IP and Port number. From scanner Data coming properly. But coming to PLC I am using Read_var function to Read Data from scanner. I am not getting Scanned text in PLC. Is there any alternative function to read TCP/IP with Port Number Data to read using PLC?
  10. Hello there, I am new to the forum and had a question regarding a setting in Sysmac Studio.   In the Basic Settings for my NJ301 there is a setting on this particular line that is set differently than the other lines I have worked on. This setting is called "System service execution time ratio". On all the other lines I have worked on it was set to 10%, on this line it's 25%. This line also seems to have the most issues with controller performance out of all the lines I have worked on despite having less complexity. I was wondering if anyone knew what this setting actually does and if it should be changed.   Thank you.  
  11. Hello I am looking for how to convert a plc program TSX 47  It looks like the program was with PL7-3  I would like to read this with my pl7 JUNIOR software is it possible ? I have the TSX 4070 CONSOLE
  12. Hello im using  EcoStruxure Machine Expert  1.2 and i missing IEC Objects  tab  on the Controller properties. thanks for answers!    
  13. Hi all, I'm not shure if I saw it once, a Spanish site with a rugged I/O shield for an arduino plus a software package to build an Arduino-PLC packet. It was pretty much $$$ raised... (on my oppinion, for my application, not to dispretiate their value). Has anyone thought of it or knows of such an ensemble: A general Arduino board, a general kind of "plc-shield" (some inputs, some outputs,...) and finally, a (preferably open-source) software package to make an off-the-shelf Arduino-PLC ish? Maybe it all exists with some name changes, or this question is of a huge ammount of ignorance. Thanks. Corvo (means Raven) 
  14. Hi there,  I'm downscaling my business in Western Canada and have some legit software licenses I'm going to sell. This was my first thought as to where I might explore selling/transferring licenses, but I'm also open to polite suggestions.  I have: one Studio 5000 Full Edition ESD Software (9324-RLD600ENE) (software & valid license) two Siemens TIA portal software packages & licenses with Step7 v14sp1 and WinCC Comfort Advanced V14sp1 (software & USB dongles) an unused Simatic WinCC SmartServer license (software & USB dongle) one Progea Movicon 11 Scada/HMI developer license (software & USB dongle) one Progea Movicon NExT DEV3-FL (developer license) (software & USB dongle) an unused Progea Movicon NExT Scada license (RTCS3-F-1K+WB3-1K) for site install (software & USB *unused) one package of Schneider Movicon with license (Vijeo Designer, Unity Pro S, and SoMachine) (software & USB keys) Thanks! Mark
  15. GX Works 3

    Hi everybody! Recently I've got problem with installation of GXW3 on my PC There is a message "Any of the MELSOFT products or other software may not be installed normally. Please restart computer before installing this product" during installation. Of course I restarted PC)), delete all Melsoft products from my PC,  please i need your Help here ver 2.7 IQWORKS  I have Windows 10 64bit .  
  16. GX Works3 Projectlib Locked

    Hello, I have a problem that I need to solve in a PLC program has it's projectlib locked.  I work for a company that contracted a PLC programmer before my time to program their new version of their control cabinets. The company did not write any specific contract with the contractor and just relied on his work. The guy later delevered a buggy software that is kind of functional (the bugs came up at the commissioning after the guy was paid and now he refuses to help or to provide more consultations). I have as a task to freshen this up and make it work without bugs, the problem is that the Projectlib is locked and I cannot access the source code.  The only thing that I can changes that I can make to the code is to put some logical circuits between the I/O of the already existing function blocks, which solved some problems, but not all and it keeps one of the most important ones as well. Anyways, that's my story, so now my question is, is there and possible way of unlocking the projectlib? Any feedback would be highly appreciated. Thanks in advace!
  17. GX Developer

    Hi, can anyone help me please. Newbie to plc and bought a mitsubishi and was told off the ebay seller that gx programmer is free to download? I looked on mitsubishi and coukd not find it? Does anyone have a link they could help me with pls. Regards  Andrew 
  18. Omron NB Software

    I am facing the error while compiling the program , there is only 1 error , but not able to figure what is the actual error. Please suggest and support.
  19. Hi, I'm currently working as an intern, and my job is to transfer the program from a schneider twido twdlmda20rt to a mitsubishi fx5u-32mr/es. The thing is, i've been in trouble trying to understand and "translate" from one plc language to another certain things, like the %MW, %SW and blocks, so if any of You could give me some advisory I'd bee fully thankful (I can't upload all the pics, so theres's the link to the folder) https://inacapmailcl-my.sharepoint.com/personal/nicolas_gonzalez206_inacapmail_cl/_layouts/15/onedrive.aspx?id=%2Fpersonal%2Fnicolas%5Fgonzalez206%5Finacapmail%5Fcl%2FDocuments%2Fscript
  20. GX works 2 software

    Hi guys    I am having trouble installing GX works 2 software. The software is fully legit and came with 2 license keys the first one I put on work laptop and second on my personal laptop. The install all goes fine but when i try open up GX  Works 2 I get this message from the attached image. I have plenty of room on my pc and even have other PLC from different manufacturers on it without issue but the GX Works is just giving me grief and I have tried to increase data on MY laptop and other windows fixes but still get this message when I try open it.  Has anyone else encountered this problem before or any ideas?   Cheers guys     
  21. GX works 2 software

    Hi guys    I am having trouble installing GX works 2 software. The software is fully legit and came with 2 license keys the first one I put on work laptop and second on my personal laptop. The install all goes fine but when i try open up GX  Works 2 I get this message from the attached image. I have plenty of room on my pc and even have other PLC from different manufacturers on it without issue but the GX Works is just giving me grief and I have tried to increase data on MY laptop and other windows fixes but still get this message when I try open it.  Has anyone else encountered this problem before or any ideas?   Cheers guys     
  22. Quick Designer Software

    I am looking for a working copy of software that will work to modify screens on an old Quick Panel.  I believe the software is called Quick Designer. The old Panel I am trying to access is serial communication only. I have bought an interface cable from PLC Trainer.  I have a Windows 7  32 bit machine ready to go. Thanks, Scot
  23. EPLAN Help

    I am attempting to use EPLAN P8 (v.2.9) to import details from a 'holy grail' excel sheet of a cable list with terminal tags and numbers (source and target for each cable). To do this I began importing details in a trial and error fashion through the pre-planning menu to the pre-planning navigator. I have several questions. Question (1) Has anyone else tried to do this?  In the process of importing from the excel sheet I have not been able to successfully assign source and target for each cable object. It shows up on the synchronization dialog after I work through the field assignment but it disappears after import. ( I do not fully understand the proper structures, definitions, properties and levels to get what I want). I do understand if I import source and target terminals, and cable objects separately, then I can place on the detailed view and source and target are assigned then. Question (2) Does anyone know how to assign source and target to a cable object in pre-planning 'by import'?  (Reason being that the excel file is huge and manual assigning isn't feasible). On one of my attempted field assignment schemes I was able to have cable, source terminal, and target terminal, all on different levels (not actually assigned as source and target for the cable object btw.). However the result for source and target on the report (planning overview, form: f40_006) had all of the designations of the tree structure from the upper levels. For example, cable: HAC4401, source: HAC4401 X1:5, target: HAC4401 X1:5 TB1:5. (Where X1:5 is source terminal and TB1:5 is target terminal). Question (3) Does anyone know how to create a 'branch' or 'fork' in the tree structure in the preplanning navigator so that both source and target terminals (planning objects) are on the same level and so do not inherit each others details?  There's a bunch of info in reading the above I know, but if anyone can shed some light on this it would be much appreciated!!!! Thanks in advance,  MajorMac
  24. Hello to all , I need to upload the program from an old Schneider Modicon 140 CPU 113 02 , there is no backup for the program in this PLC so its not possible to know what software was used for writing the program. Is it possible to upload the program from this PLC using Eco Structure Control Expert ?
  25. I want to establish Ethernet IP communication between the following PLC CPUs. Schneider Electric - BMEP582040 Honeywell - ControlEdge UOC CPU900-CP1. Where the Schneider must be master and Honeywell must ne adapter. Let me know if anyone have done this or can help me to do so.