Search the Community

Showing results for tags 'schneider'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 64 results

  1. Hi, I've been having a problem with my Schneider setup, and I can't seem to figure out the problem. I'm using Machine Expert Logic Builder and Vijeo 6.2, and I can't seem to download to my PLC. I can download to my HMI just fine, but my HMI comes back with the message as mentioned in the title. Also when I perform a full download, machine expert comes up with the message "Could not connect to the device for item "xx", selected target system "PLC name" is different from the connected device "HMI name". The weirdest thing is that machine expert shows my PLC just fine, but doesn't show my HMI. I have no idea what to do, as I feel like I've tried everything. The IP range is fine, subnet is fine. The driver in IO manager in Vijeo has the PLC nodename in it, so that shouldn't be the problem either. Does anyone know what to do in a situation like this? Thank you in advance!
  2. i am trying to connect a gf+ flow sensor  through the signet 8550 meter loop for 4-20mA - i am unable to get  a reading from the sensor as i am connecting to tm3Ai8 input analog module.   please let me know how i can do this need for and urgency at a site.
  3. Hello everyone, we have a problem with a connection of a Schneider HMI and a Schmersal Security PLC, do anyone have some experience in that? it's about addressing, it's unable to map address from Schmersal PLC to Schneider HIM the address of the I/O channels in the network ? What should I do?
  4. hello I have been forced to replace a TWDLMDA20DRT with a Schneider TM221ME16R. the plc is a slave but I am having trouble getting the Modbus data exchange to work like it did with the old plc. I have setup the serial port to use Modbus etc etc and I played about with the read_var FB but this wasn't required in the old plc so im confused as to why I would need to use it on the replacement. I have come across another FB send receive message but again i'm not too sure if this is required.  the master plc uses the msg2 and exch2 command. I believe I am just missing something very simple here.   Lighting Panel - Old_PLC.twd Lighting Panel1 - Master -.twd Lighting Panel - Pillar5 -.smbp
  5. Hello everybody,   First, I used the BMX NOR 0200H module associated with a GSM modem, for the time stamp and the problem is at the level of data recovery (slave PLC), I received the value of the variable (it's OK), but instead of the modification date of the variable, I received the send date (from the master PLC to the slave PLC).   After this application, I tried to use Web Desinger to do the timestamp by recovering a .csv extension file, but the file does not generate in the memory card (I accessed the module's memory card by an FTP client).   At this stage, the BMX NOR 0200H module, does not respond to a new configuration or a modification (either by Web Designer software or by Web Server, even these last two confirms me by a dialog box that the module has accepted the change).     Thank you all for your attention.    
  6. This course is designed to equip the novice with no prior PLC programming experience with the basic tools necessary to create a complete PLC program using ladder logic common to most current platforms. Use Software : - Somachine EcoStruxure Machine Expert Basic - Free - Vijeo Designer Basic Full Articel About Lear PLC Schneider  Video Tutorial Learn PLC Training Free
  7. Hi We have some plc programs written by concept 2.1 b2.1 XL ,concept 2.1XL. I need setups of these versions
  8. Hello, Currently, I have Schneider PLC- LMC058 - LMC058LF42 which support Ethernet communication. I want to collect data from this PLC to Database "MySQL". In order to do this I have below options: ** I can use Kepware OPC to gather data, However, there are 2 issues am facing. ________[*] this PLC appears to be Telemecanique PLC instead of Schneider .. which is what I don't understand. ________[**] Kepware OPC doesn't support Schneider nor Telemecanique PLC ... that's what I found but not sure of it. ** I found Somachine SQL gateway which dumbs data to MySQL, however: ________[*] I can't find enough resources on how to use it. ________[**] It's asking for License, Is there a way to crack or bypass it? ________[***] Has anyone used Somachine SQL gateway to directly connect Schneider PLC to MySQL database. My preference is using OPC server as it's the easier way, Hope I can find support on any of these 2 directions! Thanks. AK
  9. Hi, I'm new to both structured text and Modicon. I'm having trouble compiling this tiny procedure, meant to scale a number to an integer when the operator changes it. Although I can set the page edit variable to @localparameters.iLTemp_SPt1 with no problems, I can't get this function to compile as either a local or global procedure. What am I doing wrong?  
  10. Dear experts, I have a problem with drive for servo motor "Schneider elau c400", the problem is that I was doing parameters backup, but it stopped suddenly and tgen I found that all parameters back to default, what are the initial parameters of the drive which can start the motor?
  11. Hello,   I need to communicate a Datalogic Qw2120 ( with a USB connector  )  to a Modicon M251, it has a RJ45 Serial, i don´t know where to start , can anyone please give me a hand ? I would appreciate it very much.    
  12. Hello,   I need to communicate a Datalogic Qw2120 ( with a USB connector  )  to a Modicon M251, it has a RJ45 Serial, i don´t know where to start , can anyone please give me a hand ? I would appreciate it very much.
  13.   Hi everybody, this is me psoting for the first time here.  Currently I am taking a distributed control systems course, and one of our current tasks is the following: "Develop a control system with the task to control an induction (asnychronous) motor. You may use HMI SCU 8B5 (Schneider electric PLC) and Altivar71( Schneider VFD). The communication protocol to be used is CanOpen. The process should be visualized on the HMI of the PLC. Using the IGSS scada system, you should be able to control and observe the system on a PC." I have written the SoMachine program that I will upload to the PLC(basically Schneider provided the code for the exact same hardware:https://drive.google.com/file/d/1VW9deqK5TeEEQeA6fZZjteijUs7xVPcH/view?usp=sharing). Then I moved on to set up the IGSS scada program, following the pdf manual listed on their site, page 18 and on:http://d2i1dro1ulg1xm.cloudfront.net/training/FullWS_Exercise_Master.pdf . I tried to follow through all the steps, however I do have a few questions. First, in step 8., which driver should I use for my hardware? I selected the Modicon driver, as that was one of the few Schneider drivers available(see attached image). My second question is with regards to connecting the variables that the PLC sends to the PC and actual objects in the graphical environment, such as on page 32. How do I do it? If anyone has more materials on this topic, it would be greatly appreciated. I can't get any help from my tutor(he refuses, and says we do our own research). If you know somebody who could perhaps help me out on this one, please feel free to share with them this question.     
  14. Hello, I am new to the forum. Being doing a lot of googling to see if theirs any cross-compatibility between an M241 PLC and a Simatic panel PC and stumbled across this forum which hopefully could help me out. I'm starting an automation project to automate my home brewery. The M241 from Schneider electric seems to tick the boxes for what I require.  At my work theirs a redundant Simatic Panel PC 670 just waiting to be recycled. My question is, can I use the panel pc purely as an HMI for the M241?  
  15. Hi Everyone! Where are my experts? I am undertaking a project at work. The project contains analog style motor positioning circuits (operational amplifiers, integrators, and other PI elements). Not that this is relevant to the post yet ;) .It's my first PLC project ever! I am using the Schneider M258 with SoMachine 4.1 The PLC is talking to SoMachine via Ethernet (obviously I have a router between the PLC and my pc).I can Login and run the first POU I created. It's a simple And logic circuit for now. I have a co worker (c programmer) agreeing to help me pass data from my PLC to a browser screen. Although he's not familiar with PLC he's quite skilled writing code. He has wrote a Modbus protocol which allows him to interpret Modbus commands on his desktop.   1) Do I Need any special hardware to pass the data out of the PLC into the Router then into his browser. 2) As a trial can I send him MODBUS commands regarding my AND circuit? 3) How do I create such a command? 4) Is it possible for him to send me Modbus commands to change variables inside my program? 5) Are there web browser "plug-ins" for this idea? Thanks for reading and hopefully all of you can help me answer some of these questions.        
  16. Hi all,   currently as part of a project I am trying to communicate between a Schneider M340 plc and an Allen Bradley micrologix processor. I am programming the M340 and the micrologix has been installed by another supplier. they have mapped the Modbus registers on their side and given me a spreadsheet with these.  I am able to read values with no issue but I cannot write values back.   i've included a screenshot or the read_var and write_var instructions I am using. I would really appreciate any help if anyone has any insight on this   Mark
  17. I need to charge a plc program on a TSX67. Can you tell me which cable and program  I need to connect and charge to the TSX67Can you help me please?
  18. Hi all, I am working at a company that has a paint booth that is rather outdated. It has 10 robots in the booth and the safety circuit for each robot is controlled by a Modicon Nano TSX PLC. I have managed to successfully download the programs with the PL7-07 software (managed to do it on a laptop with window XP). We have some back up programs that were taken roughly 4 years ago and I would like to load them both up on the software and compare them. Is this function possible and if so how do I do it?   Thanks  Shane
  19. I need help regarding setting up modbus communication between Allen bradley micrologix 1400 and Schneider altivar312 vfd and rslinx for pc. I am totally stuck with it. 
  20. I can not figure out how to perform Io Scanning without using NOE Module  Is it by using Read_Var and Write_Var ?  and if it is , How . Any links can help ?
  21. Hi,friends. I have a project which is about control of speed.When I do this ,I need to use  Schneider PLC with M238 by using PID Controller.I decided to  control  speed of electric motor of this PLC . Is there any source material or anyone who struggled with this before  for this project?
  22. Hi,  i want to read real time and date in simulation mode. How can i do this in Unity pro? Thanks for helping
  23. ASCII Code 8 Byte In Twido

    Hey Guys!!!! I'm trying to use ASCII 8 bites in TWIDO PLC and on MOD BUS TCPIP it connected to WinCC , where I'm trying to read the ASCII in as a STRING char that to in 8bits. The problem I'm facing is that it is getting swapped like if I'm writing VA in PLC then on SCADA it is showing AV. In WinCC there is no setting for word swapping. Therefore Kindly help me for this in plc end
  24. Hey Guys!!!! I'm trying to use ASCII 8 bites in TWIDO PLC and on MOD BUS TCPIP it connected to WinCC , where I'm trying to read the ASCII in as a STRING char that to in 8bits. The problem I'm facing is that it is getting swapped like if I'm writing VA in PLC then on SCADA it is showing AV. In WinCC there is no setting for word swapping. Therefore Kindly help me for this in plc end
  25. Hi all, I am trying to control and/or read values from Schneider Altivar12 VFDs. Via Modbus on a AB Micro850 PLC (using the Connected Components Workbench Software). There seems to be two ways to do this with the Micro850, either with messaging (using the msg_modbus instruction function block) or with the Modbus mapping feature. I have a list of the communication parameters (see attached fileATV12_Communication_parameters_BBV51917_1.4IE05b.xls ATV32 Communication parameters_a1.2ie03.xls) But I haven't had any experience with Modbus and I am not having any success. There is not very much documentation about how to do this, If anyone can help me who has done this or knows how to do it I would appreciate it.