Search the Community

Showing results for tags 'run-time error 4205'.

  • Search By Tags

    Type tags separated by commas.

  • Search By Author

Content Type

Find results in...

Find results that...


Date Created

Last Updated

Filter by number of...

Found 198 results

  1. Omron NB Software

    shubham mehta posted a topic in Other Omron Software

    I am facing the error while compiling the program , there is only 1 error , but not able to figure what is the actual error. Please suggest and support.
  2. Hi guys. I was getting Coordinates error popped up everytime I tried to go the page. If click OK, everything is normal and can operate as usual. Just wondering how to eliminate and what causing this error. Thanks!  

  3. Real world simulator

    Aneesh posted a topic in CX-Programmer

    When we simulate a plc program we have to manually input the changes in input(like magnetic reed switch) For example when a cylinder goes from up to down reed turn OFF and reed down turns ON Is there any program available where we can define such things that will turn on and off during the process automatically.

  4. Panasonic FPG-C32T2H - E45

    pszczepan posted a topic in Other PLCs

    Hi, I have PLC with Error E45. I am not very familiar with Panasonic and in manual, explanation is not very clear for me. Any help appreciated    
  5. Hi. I use the email block on few of our NJ101-9020 controllers to send out daily reports or any status updates. Recently the PLC's started an unknown issue and fails to send email out anymore. I use the Mail_Send function block from Omron to send emails. The only Error ID i can get is 2005, with status being "Connection to SMTP" failed. Looking at the troubleshooting guide, i cannot find anything to do with error id 2005, in fact its missing. There is 2004 and 2006 but no 2005. I've tried all the obvious thing like, power cycle, redownload the whole project, create a new instance of Mail_Send function block etc. Nothing seems to have fixed this unknown issue. Our IT department did a full check on their side and nothing seems to be out of order. I can still remote into the PLC, so i dont know what exactly is the problem. Has anyone came across this error ID before? Any ideas why this might have been happening? It was working well until few weeks ago and nothing changed and this suddenly started. Any input is really appreciated. Thank you.
  6. Hello! I have been working with a Factory Talk Studio V8.0 and my computer was crashed, "blue screen". After this, I can not open my panel project anymore, I only get information Failed to open factory talk private directory for the application. How to save my project?  

  7. NE1A-SCUP02-EIP

    kckku posted a topic in Omron

    Does anyone have experience with the NE1A-SCUP02-EIP safety PLC? We had a machine shutdown yesterday with a L9n4 error on the NE1A unit. The manual says this is a tag data link error. Does this cause the safety PLC itself to shutdown? I always thought the EIP portion of the safety PLC was only used for status reporting to the PLC. The safety portion is strictly on DeviceNet and is independent of the EIP network.  The CJ2 PLC's error log tells me it had problems communicating with the safety PLC, the VFD, and NX I/O's which were all in the same panel going through an Ethernet switch. 

  8. 0x0408 error

    New plc man posted a topic in CX-One

    Friends need help on my plc omron CJ1W-PA202...can't find it's IP and connect with my servo drives 
  9. Hi I have encountered a problem with CX-integrator. I'm not able to open the program. The following message appears:  System error. Save the date and close the application.  (Error code 0035) I have tried to reinstall the entire CX-one packet.  Any ideas?  Regards MBD

  10. Fanuc Robot Error SPOT-474 and SPOT-476

    jnelson15 posted a topic in Robots

    Hi, I am new to this forum and pretty new to programming fanuc robots. I do have one program that is working in production under my belt. The company I work for recently bought a used M-20iA with a R-30iB controller. The robot was tested and worked before it was shipped to our facility. However, not upon start up the robot faults out and gives the error messages:    SPOT-474  NM&OUT24v shorted after MCC SPOT-476  Fix Pwr short & then cycle    I am wondering if a wire was vibrated loose during the shipment, however I have not been able to find anything in the cabinet. It looks like all of the boards are lighting up and working fine. I have been unable to find any documentation on these particular SPOT errors.    Has anyone experience this error and knows how to fix it? Or does anyone have resources that may shed light on the situation? Thanks!
  11. Hey guys,   I know this is a topic that has been discussed before, but I am having trouble finding exactly what I am looking for.. I want to know the most efficient way to record data from my PLC to an Excel file on my PC. I want this to be done without the use of the PLC's webserver.  Specifically I am trying to record vfd speed every 10seconds with a time and date stamp. How can I do this?   Thanks, James  
  12. Hello to all  We have a problem with starting CPU. In GX Developer we click "Diagnostics" and see Error 2400 File set Error. What causes this error? Error code list[Error code 2400] and point to step / parameter 1100 we already have format the memory the last thing not tried yet is :  - swap the CPU , (still in process provide by purchasing) - change memory battery (as per suggest by machine vendor) kindly needs some suggestion if anyone experienced this problem, or maybe some tips    Applicable machine    QnA series PLC ===================================================================================== Error code(SD0)    2400 Error message    FILE SET ERROR LED status(RUN)    OFF LED status(ERROR)    Flashing PLC operating state    Stop Diagnostics timing    At power ON & reset [FILE SET ERROR] The file specified with a parameter does not exist. ■ Collateral information • Common information: File name/Drive name • Individual information: Parameter number ■ Diagnostic Timing • At power-on/At reset/At writing to programmable controller/STOPRUN Read the individual information of the error using the programming tool to identify the numeric value (parameter No.). Check the drive name and file name of the parameter corresponding to the value, and correct it as necessary. Create the specified file and write it to the CPU module.
  13. Hi All, I just take over a project which involve accurate positioning and movement up to 0.010mm(around 10 microns) of a servo motor. I found out that my motor always move to an incorrect position. Let's say I want it to move to absolute position of 5.210mm, I found out that it may move more till 5.235 or move less 5.190(something like that). So i start to check if I'm outputting correct pulse. Using CX-Drive, I connect to the driver then i found out that the pulse is correct and consistent(for example i use my pulse per revolution and pitch to determine how many pulses) Currently I'm using an incremental encoder and servo motor and my PLC cycle time is around 12 ms and my servo move at a speed of 0.66mm/s. So I was wondering if my PLC scan time will affect my accuracy in moving ?? I'm using a CJ2M PLC with CJ1W-NC413 pulse card , incremental encoder and a servo motor. I want to make sure is not software limitation or anything wrong on software side before I bring it to my mechanical team   Appreciate all inputs here and thanks!
  14. Added new tags to an existing (and operational) PDB file.  Using DEMO mode switch (/t) to quickly add without USB dev dongle.  When switching from Workspace to Runtime all tags and graphics work.  However, when I switch out of DEMO mode and restart iFix, all tags show up as "Not Defined". the IGS OPC Quick Client shows good comms and data with the new PLC sources, so it's not a PLC comms issue.Truth be told, I do not work on iFix very often, so I'm hoping I just missed a simple step.Thanks in advance!
  15. I am trying to online edit a program in a MELSEC QCPU, using GX Works2, but I keep getting this error "A file which does not exist in the PLC was specified" <ES:010a4022> Few weeks ago I had just online edited the same program in the same PLC with the same steps with no problem. There had been no changes to the PLC after that. Just all a sudden when I try to edit yesterday I get this error. Not an expert in Mitsubishi, just started learning the basics. Connection to PLC is by USB cable. Steps I followed to connect to PLC:    -Online > Read from PLC    -Select PLC Series: QCPU (Q mode)    -Select PLC side I/F Serial Setting: Serial USB    -Select all target program to Read, then Execute I am editing the file that I had just read from PLC Steps I followed to online edit:    -Online > Monitor > Monitor (Write mode)    -Execute the function below when mode is changed: Checked all    -Edit the program (basically just deleted one -||- contact and drew back the line)    -Compile > Online Program Change Then Bam! error get! "A file which does not exist in the PLC was specified" <ES:010a4022> I had tried Verify with PLC, but all results match. Is there something I am missing? Help much appreciated!
  16. Good Afternoon, I am wanting to do two things with and ORMON PLC and HMI with CX-Programmer and NB-Designer. 1. I want to display the current time from PLC on HMI with the real time clock. 2. I want to be able to enter a time on the HMI which will be compared to the PLC time and will stop a process when when the entered time is equal to the actual PLC time.  If I can have some help with this that would be a great help. Thanks,
  17. Hi there! I was working on EPLAN Electric P8 when suddenly, the program stopped working (mouse didn't barely move, couldn't click) which resulted in a blue screen after trying to close the program (didn't manage to force stop of the VMWARE process where I execute it).  So, the thing is I can open projects and all, but everytime I close a component window I get this error window: (S275024) Couldn't find setting USER.SYSTEM.GUI.Control.MGGrid.DeviceTagGUI.116.1002.LastIndex.index. And it happens when other different windows (for example when opening Layer Manager I get the same error with LayerManger instead of DeviceTag. Also, if I try to close Eplan by clicking the red X of the window, It won't close. What can I do? There's very little info about this error code in the net and I'm running out of ideas. Thanks in advance!
  18. Is it possible to reset " Motor replacement detected error" ( Error code 95.01) using code without connecting to PLC through sysmac studio? If yes please suggest how to do it... Thanks in advance...

  19. CX-Designer || Get error history

    Stefan_CJ posted a topic in CX-Designer

    Hello ! I am an beginner automation engineer and my new task is to export all alarm/events that occured from NS5 HMIs. Is it possible to do this using the pc? I am currently using a card to get those. (using the "hidden'' HMI's menu, accessed by pressing and holding on the display).  Thank you very much!
  20. Hi Everyone, I have FX3U 60MR PLC and TP1200 Comfort HMI, communication perameters on HMI are 9600,7,even,1 stop bit. The problem we are facing is, communication drops after approximately 12 hrs. Analog tags become ### and HMI also dont respond to digital change in plc. Then we Power Reboot HMI and communcation get established. After few hours, same error occurs. we have change the HMI. But issue remained same. HMI is programmed through TIA 13 and TIA 14. HMI also dont allow to change communication parameter. Any one can help please?
  21. Hello, I've connect CP1E with PM2120 with RS485 and already make ladder program to read voltage, current, etc. But the problem is the binary value (D1354&1355) are not appear, and there's error in D1352 with error code : 88 hex. Which is the description of error code is "Exception response", and i already doing some experiment by just making a simple ladder with RXD/TXD instruction and put D1352 addresses and still error, which is same like before (88 hex.). Can i just still do something with this error? Please help me to solved this error problem. *Sorry for bad English Regards, Steven.

  22. FX2nc PLC Error: 6402 Param Error

    Sohel.ahmed.uk posted a topic in Mitsubishi

    Hi, My PLC is fx2nc-32MT. When I diagnosis the plc, this error I Found, 6402 Param Error. Please check the attachment Thanks for your Support.
  23. So I have a plc program where most of the outputs are based on a counter that goes from 0 to 1000. The counter speed is adjustable and is generally set to run through a full cycle (count from 0 to 1000) anywhere between 0.5 to 2 seconds. The problem is, when I try to energize an output by using an EQU instruction, it will almost always skip the count because the scan time is not fast enough. I've been using a LIM instruction which has been working, but its not quite as accurate as it needs to be. I switched the counter logic to be continuous to try to make it faster which made it almost perfectly accurate... But only in the continuous task; it made the other periodic task significantly less accurate. I was curious if any of you had any tips on how to remedy this or just general help. I am still relatively new to PLCs and ladder logic so any advice would be awesome, Thanks in advance! Edit: The purpose of the counter is to cycle through from 0 to 1000 over and over again. My outputs actuate during a certain interval within this cycle (For example I would say actuate from 300 to 800 and it would stop and end once it hit those values via an EQU or LIM instruction). I wrote the logic as follows: First I calculate how many cycles per minute I want to perform, using that value I calculate how many times I want to increment my counter per millisecond. Then a timer is given a preset of the total cycle time. While that timer is running I continuously multiply the timer's accumulated value by the "cycle count per millisecond" that I calculated earlier; the resulting value is the current count that all my outputs are based on... Hopefully that makes sense, I know it's not the best but I could not figure out a better way of doing it and I know rounding is certainly making the accuracy worse. My hardware is: Allen Bradely PLC (5069 l306erms2), 5069-ob16, 5069-ib16, and a Kinetix 5500s2 Driver for my motor(s)
  24. Is it really not possible to use 2 shortcuts with FTView ME panels. When I try to create the runtime file (.mer), I am getting an error that can not be used 2 shortcuts. Is there any possibilities to make FTView ME connection with 2 different PLC's.
  25. SoMachine Motion Logic Builder V4.31. Can anyone guide me on how to read the execution time of the STL logic in my application? Thanks.