Search the Community

Showing results for tags 'rslogix500 rslogix5000'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 55 results

  1. RSLogix5000 Transfer function Bumpless transfer between two inputs. If criteria or FLAG is true, then transfer from input-1 to input-2 at a prescribed ramp rate, and then release the output to match the selected input without rate restrictions.  Issue: The issue is that upon the status of particular input (FLAG), the control valve demand jumps from 0 to whatever the output of the PID’s Low Select value is (maybe 50% or 80% or other). Request: Ideally, I would like to mimic or replicate the Transfer algorithms provided in other control systems, as described below . The TRANSFER algorithm performs a transfer between the two inputs.  The output is equal to the IN2 input if the digital input FLAG is TRUE, and the IN1 input if the digital input FLAG is FALSE.  The algorithm automatically performs a bumpless transfer between the track input and the selected input when a tracking request is removed.  The algorithm ramps to the selected input (IN1 or IN2) at the specified track ramp rate (TRR1 or TRR2).  Internal tracking may be selected to allow a bumpless transfer between IN1 and the IN2 inputs.  Individual track ramp rates may be initialized to ramp from the IN1 to the IN2 and from the IN2 to the IN1. Attached is RSLogix5000 program "transfer.acd" Thanks.
  2. Is there an easy way to copy an Excel table into a string array in RSLogix? instead of doing it one by one?
  3. Can Anyone tell me what is the shortcut on the keyboard to open the string box to enter the text instead of mouse click? RSlogix 5000 PLC.
  4. Searching the forum did not provide me with any useful results. If there is another post with an answer, my apologies. I had ran into an issue with a 1769-L32E processor running out of memory a couple of times. Is there any software or easy ways to analyze an entire RSLogix 5000 project and show how much memory programs, routines, UDTs, AOIs, etc. are using?  Ideally I would like to be able to find what components of the project is taking up so much memory quickly since our company standard is to use UDTs and there is a lot to look through. Thank you!
  5. Hello, I'm using RSLogix 500 application for LAD programming. I would like to convert the float data type to integer data type and vice versa. I tried with the COP instruction as some had mentioned in other forums, but it was not working. So any suggestions on solving that issue would be helpful.
  6. Can anyone explain to me what this would mean in a COP instruction? Source: #N[N187:4]:[N187:5] Dest: #N[N187:1]:0 Length: 20 I am doing a PLC5 conversion to rslogix5000 and some (most) of it has been a nightmare -.-
  7. Hello everyone guys;      I’m new in this web page and it’s great.  well, the thing is I’m trying to open a .rss file ( a company sent to me a project in rslogix500 to replace in a micrologix 1400 plc. But when I’m trying to open the project I can’t do that. I’m reading about versions and everything but how can I know the version that they used to create the project? Can anyone open my project and save for version 11.00 I have that version in my laptop.
  8. Hi, All!  I am very new to PLCs and I am currently writing ladder logic for an Allen bradley MLX1200.  I have a number of inputs which i have addressed in the format: I:1.0/1 etc. which should equate to I:Slot.Word/Terminal. I have checked the SLC 500 Instruction Set document which has informed me that this format should be structured correctly however I still receive the error message "ERROR: Address must be specified to the word level!"  Can anyone see where I am going wrong?  For reference Slot 1 is a 4-Channel Thermocouple Input Module (1762-IT4).  Any help would be greatly appreciated.  Thanks C
  9. Rslogix Array Search

    Hello,  I have 30 recipes(g_Blend_Recipes) and want to search for an item number in the recipes and compare it with what the operator enters on the HMI. The recipes itself is an array and there are 5 item numbers in each recipe. I read about the FSC instruction but did not figure a way out yet. I am attaching a picture of the recipe. Any help would be appreciated.     
  10. Here are some videos training PLC AB(Rockwell) RSLogix5000 I hope this helping someones! 1) Setup RSLink to connect PLC using a USB cable   https://www.youtube.com/watch?v=mk-wgnwO4E82) How to set up hardware involve Input/Output, Analog, Device Net... PLC AB(Rockwell) RSLogix5000https://www.youtube.com/watch?v=pIUNPCEcNn03) How to use timer/counter/Compare PLC AB(Rockwell) RSLogix5000https://www.youtube.com/watch?v=7BDzAoFBJPMhttps://www.youtube.com/watch?v=EM3KO8JSYsMhttps://www.youtube.com/watch?v=yQtrIhTmwqA4) How to use Analog PLC AB(Rockwell) RSLogix5000https://www.youtube.com/watch?v=8raR0f7zr6M5) How to use RealTime-Clock PLC AB(RockWell) RSLogix5000https://www.youtube.com/watch?v=Lgg8hjs5jkY    
  11. Autotuning Kinetix 350

    Hell PLC World! I have been trying for several weeks in my spare time at work to tune an Allen Bradley Servo Motor.  Below is the list of hardware I am currently using: - CompactLogix Motion Controller (1780-L33ERM) - Kinetix 350 Driver (2097-V34PR5-LM) - MPL Series Rotary Servo Motor (MPL-B310P-MJ74AA) I have been using RSLogix5000 for testing and I plan to use it to develop a simple conveyor type program later.  I have tried a list of things which will be below, but to no avail, I cannot simply jog the motor for any period of time without triggering a position, velocity or bus voltage error.  I have tried changing the motor, driver and feedback cable to no avail.  Here is the process I have used: 1) Add the hardware to RSLogix5000 (PLC, Driver and Motor) 2) Configure the motor 3) Run the hookup test.  This works flawlessly.  The motor will slowly turn independently on the feedback test for as many revolutions as I input.  This is what makes me think I am doing something wrong in the tuning process. 4) Run autotune process with the velocity, acceleration and jerk set well below the limits of the hardware.   5) Attempt manually control motion 6) Recieve error I have tried changing the input from trapezoidal to S-Curve, changed velocity and position limits, manually tuned velocity gains in a myriad of configurations.  I have swapped legs on the 3 phase input (which made matters worse). I suppose it is possible that multiple pieces of hardware are faulty because this equipment was previously used, but I still cannot wrap my head around why the hookup test would work so flawlessly, yet I cannot just get the servo to rotate at an equivalently low speed. If anyone recognizes my mistake, I would be eternally grateful.  I am an intern studying control systems in graduate school and as popular as AB is, I would sure like to get some experience with it.  Thanks in advance!  
  12. CompactLogix E/IP to Kuka KRC 4

    Hello everyone,   I need to communicate a CompactLogix to a Kuka KRC 4 by Ethernet/IP but I do not know to generate the EDS file..... any clue please ?
  13. I am needing some guidance on an application I'm working on. I'm trying to obtain data from a profinet slave device to an Allen Bradley compactlogix PLC. I am using a Prosoft PLX82-EIP-PNC profinet-/ethernet-ip gateway as a median to allow me to access the profinet data. In RSlogix5000, I have created an EIP Class 1 connection for the profinet controller and AB PLC (248 words of input data, 248 words of output data). The same structure is created in the profinet controller (248 words of input data, 248 words of output data). The profinet gateway and PLC are communicating properly. From my profinet slave device, I have a specification that the data is structured within a 23 byte format. Connecting to my profinet gateway, I can see this data. I have attached an image that shows the specification of the profinet data and the data values displayed inside the profinet controller. From the PLC side, I'm needing to be able to see this data and put it in meaningful values. I am using the profinet slave device's internal temperature as an example to work towards. I'm not sure the best way to be able to handle this data and structure it to a meaningful value inside the PLC. (I am using the device's internal temperature as an example to try and get into the PLC).   Thanks,
  14. I am needing some guidance on an application I'm working on. I'm trying to obtain data from a profinet slave device to an Allen Bradley compactlogix PLC. I am using a Prosoft PLX82-EIP-PNC profinet-/ethernet-ip gateway as a median to allow me to access the profinet data. In RSlogix5000, I have created an EIP Class 1 connection for the profinet controller and AB PLC (248 words of input data, 248 words of output data). The same structure is created in the profinet controller (248 words of input data, 248 words of output data). The profinet gateway and PLC are communicating properly. From my profinet slave device, I have a specification that the data is structured within a 23 byte format. Connecting to my profinet gateway, I can see this data. I have attached an image that shows the specification of the profinet data and the data values displayed inside the profinet controller. From the PLC side, I'm needing to be able to see this data and put it in meaningful values. I am using the profinet slave device's internal temperature as an example to work towards. I'm not sure the best way to be able to handle this data and structure it to a meaningful value inside the PLC. (I am using the device's internal temperature as an example to try and get into the PLC).   Thanks,
  15. Hello I have a problem with dl-ep1 ethernet modul. I connected the module to a IL-1000 sensor amplifier. There is some problem with the communication. How should I adjust ? I made some pic about the trouble. The sensor is a IL-600 laser distance sensor. I dont know yet how can I get the actual value.  Anybody knows how to set this modul ? If I think correctly after the right setting, if I check the sensor output:0 then, I can see the actual value of the IL-600 sensor. But unfortunatelly this part also not so clear for me, because I can connect about 15 sensor this ethernet modul.  Thank you so much if anybody help.
  16. Client is wanting to use a 1734-AENTR with I/O and what not. When I go into the hardware tree to add I/O, its grayed out to add a new module to the hardware tree. JUST for this critter though, has anyone else experienced this?
  17. I'm trying to replicate something I've done in an RSLogix5000 file without the usage of those convenient arrays.  I have 24 counters, for 24 hours in a day. I have a MapleSystems screen relaying this data in the warehouse. The logic I've tried to implement is as such If bit (HMI assigned for shift start) = 6 --------- Copy C5:78 to C5:130 with a length of ten. I'm trying to copy the 10 counters that will be displayed on the MS monitor into the part of the counters that are connected via tags. It's done like this so that if someone starts the shift at 8, it'll take from 8 + 10 hours into the same C5:130 ten registers to display it on any shift. When I copied c5:78 --> c5:130 w/ len:10 it copies the first value C5:78 into the tenth register C5:130, when I'm trying to have it copy those ten into the C5:130 starting ten, to display on the screen. What am I doing wrong here? It's as if that length of ten is acting as an indexer and if that's the case, do I have to do 10 copy lines for each hour I want to utilize this logic on? Thanks so much in advance!
  18. I'm having a difficult time updating some HMIs on a production floor using both Rslogix5000 and EzwarePlus. I've exported my CSV from RS, and in the importation stage, it shows I have no tags. However literally everything on the screen is already linked up to tags. When selecting an objects properties and clicking tags there, everything shows up. When in the address library nothing shows up, and my CSV after clicking import, does nothing.  Is there something brutally straight forward here that I'm just missing?
  19. ControlLogix DLL File

    Hello, I've been wracking my brain, but I thought I remembered there was a way to store and execute a DLL file inside of a ControlLogix (not softlogix) controller? You could use exposed functions inside the DLL to fit your needs. Am I going crazy? Or is this not possible? Any insight into this is much appreciated. Thanks, neech
  20. I need a program that will utilize 4 Banner Lights. They each have 3 colors except for the one on the top it has 5.... I need each to be on together, but I want the output color to be randomized. I'm brand new to PLC's and would like to use RSLogix 5000, this will be a giant help for me to play with and alter to further my learning. Thanks. Using 16 Outputs, but only 14 are used. Ive thought about an array possibly, but this is my first time trying to write code on 5000 ive used 500 in the past, and the whole tags thing is weird to me.
  21. Hello everyone! I try get a value of confidence data of sensor LR560 by Hart (Command #206) , but i dunno how send a command to HART way CIP Message.  I tried with " CIP Services to Pass-through a HART Message to the HART Field Device" but don't work.  Equipment: CPU: 1756-L63 RSlogix 5000, v 20. Hart Input: 1756-IF8H Level Sensor, Sitrans LR560 Best regards.
  22. Open .RSP file to RSlogix500

    Anyone knows how to open .rsp file to RSlogix500? It is a backup file but I'm not able to open it in  RS500. is there a software conversion tool needed to perform? Thanks! Marky
  23. RSLogix500 Ladder Problem

    Ok, so I have 22 bits that I need to monitor the status of; all in separate words. Each change of state (on each bit) I need to trigger a timer and have the timer done to completion. I'd like to have the timer reset if a bit changes state during timing. I'd like to keep it to one timer. I'd like to keep things as simple as possible so the less rungs / branches the better. Any help?
  24. Newbie Screwed up AB 5/04

    Greetings everyone, I am using a VERY OLD laptop, Windows 98, the correct AB cable....and only used to download programs into equipment to restore in emergencies into AB 5/04.  I was able to connect to SLC 5/04 using RSLinx (used Auto-Config, all worked correctly) , and wanted to install a program from earlier version using RSLogix500.  It seemed to download correctly, the pop-up asked if I was sure I wanted to install new program, hit YES...then said it would change channel, pop up buttons were "ALLOW" or "DENY" (something like that). I hit "ALLOW". All seemed good until I plugged HMI back in....had a bunch of codes it didn't like, so I went to install back to original version.  When I went through the same procedure (mentioned above)....5/04 and laptop no longer wanted to communicate.  I assume it has something with allowing the channel change.  As you can tell, I know Jack Squat...I'm not a programmer (duh), but was handed a computer with instructions....and now the machine is down.  Any help with getting me in right direction is highly appreciated in advance.  I searched the forum, and wasn't able to find a solution... I suppose it has to do with an in-experienced, well intending human messing with stuff he shouldn't be messing with !!
  25. Masking out values

    Hello all,    I am trying to mask out some values out of a bar code from cognex data scanner. Here is an example of what I am trying to achieve Data from Cognex: 2275019xf1-8877R215BA1234567 i just need 2275019XF1-8877R215B    I know i can program the bar code scanner to not to read but that would cause a lot of downtime. I wanna to know how to mask such a big number. Any help would be appreciated. I would be using RSlogix5000   Thanks Pratik