Search the Community

Showing results for tags 'rslogix micro english'.

  • Search By Tags

    Type tags separated by commas.

  • Search By Author

Content Type

Find results in...

Find results that...


Date Created

Last Updated

Filter by number of...

Found 124 results

  1. Training for a complet SCADA Project made in RSlogix, RSview and RSlinks https://www.youtube.com/edit?o=U&video_id=she3MGnwIF4   Enjoy 
  2. HI guys, does anyone here knows the data logging format for plc AB 1766? I had looked into manual but I cant find it,may be i'm miss look it.
  3. Hi, I am trying to enter a new line in a string. For example " Line 1                           Line 2"   Can this be done in rslogix 500 ?   Thanks
  4. I am currently working on a fwd rev motor control routine, we have all of the circuit wired up and verified the physical circuit is working as intended when manually jumped. But will not turn the outputs on...  I triple checked my logic and it all seems right, all inputs are true all the way to the output on both the fwd and rev rungs. But still the outputs won't go true. if I toggle an output bit it does show up on the dc out card, I haven't tried forcing anything.  No errors or warnings, fuses are fine. our teacher does not help as much as we'd like and we have troubleshot just about everything we can think of with our experience.    Any input would be appreciated, thanks.
  5. I am trying to learn the logic of a process at my new job. There are tag names that I can't make sense of because they end with _xva, _xvb, _xvu, _xvd, _xvo, _xvc, _zsm, _zsu, _zsc, _zso, _zsd and so on and so forth. I know they are associated with motion, but I need to make better sense of them. There are no descriptors. What do they mean and is there a resource available that I can reference?
  6. Dear all, I have 1794 IE8H Hart flex input module to which one Emerson HART flowmeter is connected...I have gone manual of flex module...I have to write program to read 3 parameters from HART transmitter in RSlogix 5000 (compactlogics)....in manual there are so many & geeting confused how to get this...even got sample code from rockwell site...but still nt working...If anyone have any proper document to follow please suggest or mail me on gspatil555@gmail.com.....thanks.
  7. Dear Friends; Good day. First i install the windows  virtual xp mode on Windows 7 64 bit. After installation i installed the FTM, RSLINK,and rslogix 5.0 in virtual xp mode.  Then i activate the software by Factory talk manager and select the hard disk and for a single computer activation. This process successfully acomplished. But when i open the RSLOGIX it shows popup that activation path is not found. Then i again open the factory talk tool and note that there is no activation shows in current activate products, But the activation detail shows in the RE host tab. I re hosted the activation by using go to Rockwell site and message show successfully activation re hosted.   *** Now i am stuck here is i loss my activation?  *** in windows xp virtual mode how i activate my product that application find the correct path of activation file? ** In windows xp mode if i open my Computer there is shows other hard drive partition as well as Local disk C:\  and activation file save in virtual drive instead of real C drive in windows 7. But there is no file path option to save the activation. Its by default save on C:\documents and setting\all user\shared documents\rockwell\activation\*****   Please help me how i activate my product in windows XP mode successfully?  Thanking you. i will remain Regards  
  8. Hello, I have AB PV 300 micro HMI and AB ML 1000 PLC . i want to configure it so how i can do it ? is it possible to configure both without AIC ? Which cable is required please help me.   Thanks in advance
  9. I was practicing some concepts on concurrency in periodic tasks where I handle such using SSV instruction to inhibit tasks, as suggested by Logix5000 Programmer Manual and after I downloaded the program through ethernet cable to the PLC (Compact Logix L32E) it became impossible to communicate to it, showing 1789 Virtual Chassis in the Who Active Window isntead of the PLC I'm using. I tried to reconfigure it using RSLinx and serial cable but I had no success, the only solution was reset it by removing its batery. I was wondering what could have caused the problem. Concurrency.ACD
  10. Hello All! I am having difficulties mapping register values. In the TURCK register there are 24 unique register bytes corresponding to different value registers (8bit x 24). These 24(8bit) bytes were mapped into RSLOGIX 5000 as 12(16bit) INT words ....INT[12] .. This means there are 2 bytes (2 unique register values) inside each INT word. WHAT I NEED TO ACHIEVE: 1. (BLUE outline in drawing) Write/Map a value of "32" into byte 7 of the TURCK register so effectively starting at  INT[5].8 in RSLOGIX           Drawing1-Model.pdf This will enable the value of CNT1 (encoder count) to be registered in bytes 8-11... 2.  (PINK outline in drawing) READ/MAP the values registered in bytes8,9,10 and 11(4x8bits) into a SINGLE 32bit INT value which will tell me the CNT1 value of my encoder. I am having problems when ever I try to COP a value of 32 (no matter what kind of array it's sourced from) into INT[5].8 & I haven't tried to map/read the values of bytes 8-11 CAN SOMEONE PLEASE HELP EXPLAIN HOW TO ACHIEVE THIS?! Thanks for your input EVERYONE! :D Drawing1-Model.pdf
  11. Hey guys, this is probably a stupid question so I apologize if it is, but I have a PanelView Plus 6 700 and a CompactLogix L36ERM on one of my machines at my plant.  We have several different molds that run in this machine, so we have 5-7 different PLC programs that can possibly run in this processor, depending on which mold is in.  I'm planning to go to a single program with recipes, but I haven't had the time to set that up yet.  So we use the PanelView for troubleshooting, and adjusting process paramters.  On the main screen in the PanelView I have the time/date and also the program name.  What I have been doing is just creating a string tag in RSLogix 5000 that is the program/processor name (we use the same name for the processor and program) and then on my PanelView I just create a string display that looks at the string tag name in the processor.  That way anytime a mold is changed over and the PLC program is downloaded, the PanelView displays the correct program/processor name.   Now this is all fine and dandy and works as long as if a new program is created, we remember to change the string tag to the name of the new program, we often run new sample parts and what we do is rename an existing program that has similar logic and save it as a new program name.  The problem comes up because if somebody copies an existing program and makes a new one, the string tag is still going to say the name of the old PLC program.  Now if we only had one or two or even 5 machines, it would be simple enough to just remember to change that string tag.  Our, or I should say MY problem is that we have approximately 40ish machines in our plant, and I can't always remember to change that string tag every time we create a new program.  I should say that I have been, but there are times that I may forget. My question is this, is there any way that in FactoryTalk View ME Studio to have a string display the name of the processor or the name of the PLC program automatically without having to manually enter the name into the string tag that I created in RSLogix 5000?  Like is there a system tag somewhere that has the name of the processor or the name of the program?   That was way more explaining then probably necessary.  It's early and I've had way too much coffee haha.   Thanks guys.
  12. Just wondering if I need to set up two Motion Groups to specify the direction of travel along 1 AXIS? (Forward and Reverse) If not, how do I specify direction when using motion instructions (specifically MAM) with incremental motion. 
  13. Good day, We are using Guardlogix 1756-72s controllers for our ESD system. We created safety add-on instruction in RSLogix5000 v20 and wanted to test it using RSLogix Emulate 5000, however we are getting an error that safety add-on instructions are not supported in standard controllers. Is there a way to test safety code using Emualate or Softlogix?
  14. Hello All! This is my first post so please give my descriptions some lee-way please:P I am having trouble finding a solid example of ladder logic which integrates a: PowerFlex (755 in this case) Rotary Incrematal Encode ( or any encoder for that matter) A Prox to reset the resolution at specific points along the axis Also, can I use the standard Motion Instructions (MAJ,MAS,MAM etc) to control the movement sequences of the PowerFlex or are they only meant for use with Servos? I am working on automating a Lumber Treatment Process. The movements will have to move tens of thousands of pounds.. Therefore I would like to use the PowerFlex as a Torque Limiter to control a 15HP squirrel cage motor on a massive gear reduction. I have the distances and pulses per distance traveled from the mechanical engineering guys.. I'm just having problems integrating! After using the Setup Wizard for PowerFlex how can I go about actually inserting movement instructions for the drive into my ladder logic? Some more info on different movement profiles.. I've also included my attempt at trying to piece this together thus far.. Any input would be welcome! (StellaPLC) https://sites.google.com/site/lyncedrgb/eva/rslogix The actual drive and PLC are not available to be me at this time.. could this be an issue while trying to write this motion control program? (obviously not testing & troubleshooting portion) Tugger Speeds Freq. ACCEL TIME DECEL Time E-Stop Decel Torque % of max Notes   VERY SLOW 15HZ 0.5s 0.5s 0s 100     SLOW 30HZ 1s 1s 0s 100 Restricted to slow speed within 3m of ends of transfer deck   HAUL 60HZ 5s 5s 2.5S 100 Max torque limit 250% of FLA   EMPTY TRAVEL 120HZ 2s 0.5S 2.5S 30 Torque Limited to 25%  

  15. analog output PLC

    sahilgupta1527 posted a topic in Allen Bradley / Rockwell Automation

    how i do connect TRIAC with analog output for vary the GATE signal of triac
  16. I'll try and keep this neutral and not degenerate into a rant, but my recent experiences with the AB Micro 850 have been less than heart-warming and encouraging.  We recently purchased a production line for my place of employment from a trio of OEM Equipment builders.  All were supposed to use AB ControlLogix or CompactLogix PLCs.  However, two of the vendors called purchasing and said "let us save you some money, by using the Micro-850 PLC Rockwell's latest and greatest offering".  And our purchasing bought it.  So this week we brought in a Rockwell Premier System Integrator to add 9300-ENA units to these machine so we could collect SCADA Data from them. Now in full disclosure these were CCW version 6 not the latest and greatest 9.1,  So we came to machine 1 a micro 850 and uploaded, saved a copy for safety, then changed the Gateway  from blank to the NAT device IP and downloaded.  Machines on our SCADA Net could now see the Micro 850, but the machine it was in wouldn't start or communicate with the Component Panelview.  Turns out that thing was in remote and came up in program.  Chose run and all appears well.  Go on and do machine 2 another Micro - 850 and it went equally flawlessly.  Our downtime window was up so we started making product.  Only one problem the previous maximum speed was unattainable.  As a matter of fact several configured variables were at their Initial Factory State rather than the state they were when we shut down.  SO HERE COMES BURN NUMBER ONE.  Upload and Save only gets the logic not the variables or the values.  You must export the Controller and each programs variables to a separate excel file to have them around to restore.  That means 1 upload and 15 exports per machine backup and no word of this "FEATURE" in the tech database.  Now today we got a window to do the third machine also a Micro-850. This time we went to program and changed the Gateway without downloading.  Went back to run and all was well in CCW, except the NAT couldn't find the Micro-850.  Blowing the project totally away and doing an upload we learned that the Gateway was not there.  So we did the 1 upload, 15 exports, 1 download and 15 imports and this time all worked fine.  SO HERE COMES BURN NUMBER TWO.  So now we try and place message instructions from Machine 1 to Machine 2 in place and nothing will communicate.  Now before you think we're total fools we had to Micro-850's talking to a Compact Logix on the shop bench just fine when they were all in the same subnet.  But when we placed NATs between them nothing works.  Hopefully our SI will sort this out over the weekend and I'll post that answer later.  SO HERE COMES BURN NUMBER THREE.  We've decided it is in our best interest to flash our Micro-850's to version 9.1, but given the Micro's track record we decided to flash a spare first and swap it in.  Only one problem, the Micro-850 is either such a hot commodity or poor unit that you can't get one for at least 2-3 weeks.  ANd FINALLY BURN NUMBER FOUR.  Trying to troubleshoot this week I wanted to force an INPUT on; only there is no right click and force option.  It is called variable monitoring and you must lock and un-lock.  It has been FORCE for two decades, why change what we call it.  Really did we need to make this more complicated.   OK I am done.  I will not knowingly spec or buy another 850 in my Plant.  Enough said.  Control and Compact Logix only.
  17. Hello,  I am getting this fault when I am trying to load one of my program and set to run mode.  I have the same plc and I have not had this problem again. 1761-L16BWA Any suggestions ? I think this plc is older than the other I have. 
  18. Howdy, Wasn't sure the best place to post this Programmatic Timer/Delay question. I need to create a Timer whose 'time' will change programmatically. I am having trouble coding this in RSLogix/Studio 5000. I need to delay a little more every time 1 Product passes through up to a certain count then reset and start over. Basically during a conveyor transition, via a pop=up conveyor, I don't want the product in the same place every time. I want each successive product to be in a little bit different spot, call it the Conveyor Land Point. The product will land a little further each product, then start back at the first land point I have no code to share as all attempts were FAILs Inputs: > Product Count (Count up or down counter) > Product Count Cycle (Number, constant, set able, currently = 4) > Delay Time Sequence Interval (Number, constant, set able, currently = 0.25 seconds) Outputs: A sequencing delay, based on Product Count > Delay Sequence:  1st delay 1 second. 2nd delay 2 seconds, ... up to Product Count Cycle (4) then reset back to 1. Program: (As I was thinking) Set Product Count Cycle, Product Count Cycle = 4 (May change could be 3,4,5, or 6) (Might be hard code, might be an HMI input) Set Delay Time Sequence = 0.25 seconds (May change could be 0.5, 0.75, 1.0 etc.) (Might be hard code, might be an HMI input) Line start, Product Count at one (1) Calculate Delay     Delay   = Delay Time Sequence Interval * Product Count Cycle * Product Count  Product Count increments via PE Repeat e.g. Hopefully I have not 'run' at the mouth, wanted to give as much info upfront                I included a picture Any thoughts, help would be great. thanks,
  19. I am in the learning phase of HMI and PLC programing and am trying to use some of the hardware that has been donated to me. I have an AB panelview 300 micro terminal and a Micrologix 1000 Plc (they are not tethered yet). I have constructed a small test board with everything mounted to it and have successfully written and downloaded a simple project to the plc with timers, etc.   Now I need to find a way to program the terminal to make changes to the program.   I am looking for some free panelbuilder 32 or anything that will allow me to program the terminal and use it.   Can anyone help me? All help will be greatly appreciated!
  20. I am trying to learn how to use add-on instructions, and to get a better understanding I am trying to do a simplified example. I am trying to make two separate add on instructions that alter an integer tag in different ways. I would like one AOI that multiplies the input integer by 3 and another AOI that adds 3. The integer tag is a InOut parameter.  I named these AOIs "Mult3" and "Add3". When trying to use the AOI's it requires me to have an additional input with datatype the same as the AOI ("Mult3" or "Add3"). I have a couple of questions about this: 1. Why is this data type required? It seems to me that I would only need the InOut integer that I want to modify. 2. I want to use these AOI's in a number of places throughout my code on a number of tags. Would I be able to just use one "Mult3" tag for all the AOI's, or would I need a seperate tag for each use of the AOI?  For Instance if I am using the Mult3 AOI in 3 separate places in my code, two times using "Int1" as the InOut parameter and another time using "Int2" as the InOut parameter, could I just make one tag of "Mult3" datatype and use that for all the instances of the AOI, or would that screw it up in some way. Thanks for any help.
  21. Hi, I am tasked with doing some research for our company. (automation / controls ) and wondered if anyone here might know of a resource to find out what platforms they are using at the various GM plants. I'm looking for the Process PLC / Safety PLC / HMI software. Much thanks,  
  22. Hello, I have a question if anyone could help. Need to communicate Enthernet/IP a PLC Micro 850 to an HMI Panel View 800 4.3'' . Some examples would help a lot. 1- http://ab.rockwellautomation.com/Programmable-Controllers/Micro850#overview 2- http://ab.rockwellautomation.com/graphic-terminals/2711r-panelview-800-graphic-terminals#selection thank you

  23. Language translation

    Chadcarl posted a topic in Siemens

    I recently started with a new company and all of the programs comments and tags are in Italian.  Can someone pleas help me by telling me the best way to go about translating them to English?  Is it possible to create a library to upload so that i can find and replace?  We are using Siemens step 7 and allen-bradley RSlogix 5000.  Please help I cannot read Italian.  Thank you.  
  24. Looking for ideas on connectivity issues with RSLinx/RSlogix when using an EWON Cosy 131 running on Windows 10. So here's whats up: Was running windows 7, could connect to the EWON VPN and use the ethernet driver in RSLinx to get to the PLC(compact logix). Also used Automation Direct C-more software with no problem as well. Now on Windows 10, the Automation Direct software still works fine, i can ping the PLC and get to its webserver but rslinx/logix will not pick up the plc. I have tried setting up a new ethernet driver to no avail. I also connected a cable directly to the plc from the pc, bypassing the ewon, and rslinx/logix will then see the plc, so rslinx does seem to "work" in windows 10. Any ideas on how to get connectivity back over the EWON VPN? I have these in customer plants and really dont want to revert back to win 7.   Thanks    
  25. Hi all, Looking to convert older .rss ladder file into newer RSLogix 5000 compatible format. My problem is - I don't have 500 series software (or a computer to run it on) to start the conversion. Any help/suggestions appreciated