Search the Community

Showing results for tags 'rslogix 5000'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 145 results

  1. I have 23 Micrologix 1400s and I want to take the same register, N100:99, out of each one and put in a single array in a CompactLogix L18ER. From what I have tried, it only seems like I can only map a range of integers, N100:77-N100:100, to the array and not an individual register to a particular element. (For example, mapping N100:99 from machine 16 to Selected_Model[15]) Can you map to individual elements in an array? If so, are there any instructions on how to do so? Thank you in advance for reading my post!
  2. Hi! I'm using RSLinx Classic, RSLogix Micro English and RSLogix Emulate 500 to emulate a Micrologix 1100 Series B. I'm able to run, program and simulate different input and output with the emulated PLC. Everything works fine. My problem is that I'm writing a program using the nodePCCC library (https://github.com/plcpeople/nodepccc) and I'm not able to connect to the emulated PLC using the address 127.0.0.1 and the port 44818. I tried  running 'netstat -a' on Power Shell and I found out that the port 44818 is not being used.  Could someone help me identify what I'm doing wrong?
  3. Dear Experts In our plant, we have only one Allen Bradley PLC (Compact Logix L24ER) in one of our testing machines. We need to check online reason for error :LH Motor Negative overtravel Please let us know if it is possible to get communicating software RS Logix 5000 for trial Regards  
  4. I am looking help with an issue I have trying to connect to a 5370 Controller 1769-L33ER. The controller firmware is 20.014 and my studio does not have 20.014 firmware. I have downloaded the firmware and do not know how to get it extracted to my PC. Any help with this will be grateful.  Regards
  5. Dear Colleagues,   I require some help with regards to setting up virtual machines, We have some ControlLogix 1756 PLCs scattered around site running on different version (v20, v21 & v32). My company requires all software installations on company computers to go through IT. Installing all these versions on single PC is really a pain (going through IT)  for new hires and for new PCs. I am trying to suggest using virtual machines for each version that can be shared/distributed among the engineers and also to give engineers some autonomy in the VM environment.    How do I go about this especially with respect to licensing without violating the terms of use both the operating system and the automation software? 
  6. Hello, My coworker and I are commissioning a new panel. We have a 1732-AENTR series C remote IO thats Rev 6.1. The project file from a previous identical panel has the module at rev5.3 in the project tree. I downloaded the AOP and ran the installer, it worked no issues. My co worker then did the same thing but now the module is unrecognized in the project tree and the module is missing after installing the AOP. Im concerned he corrupted something. I tried uninstalling and reinstalling the AOP but no luck. It works on my computer but not his? TechConnect said something about corrupting the aop core. My coworker did the first install and he was getting confused about zip files and the virtual machine we run rsl5k on. Maybe he broke it? any suggestions?
  7. Hello I am trying to get for HAAS CNC variables eeg. 10800,10801 etc into the PLC. Does anyone know of any ADD ON instructions ?    Thank You 
  8. So I have a plc program where most of the outputs are based on a counter that goes from 0 to 1000. The counter speed is adjustable and is generally set to run through a full cycle (count from 0 to 1000) anywhere between 0.5 to 2 seconds. The problem is, when I try to energize an output by using an EQU instruction, it will almost always skip the count because the scan time is not fast enough. I've been using a LIM instruction which has been working, but its not quite as accurate as it needs to be. I switched the counter logic to be continuous to try to make it faster which made it almost perfectly accurate... But only in the continuous task; it made the other periodic task significantly less accurate. I was curious if any of you had any tips on how to remedy this or just general help. I am still relatively new to PLCs and ladder logic so any advice would be awesome, Thanks in advance! Edit: The purpose of the counter is to cycle through from 0 to 1000 over and over again. My outputs actuate during a certain interval within this cycle (For example I would say actuate from 300 to 800 and it would stop and end once it hit those values via an EQU or LIM instruction). I wrote the logic as follows: First I calculate how many cycles per minute I want to perform, using that value I calculate how many times I want to increment my counter per millisecond. Then a timer is given a preset of the total cycle time. While that timer is running I continuously multiply the timer's accumulated value by the "cycle count per millisecond" that I calculated earlier; the resulting value is the current count that all my outputs are based on... Hopefully that makes sense, I know it's not the best but I could not figure out a better way of doing it and I know rounding is certainly making the accuracy worse. My hardware is: Allen Bradely PLC (5069 l306erms2), 5069-ob16, 5069-ib16, and a Kinetix 5500s2 Driver for my motor(s)
  9. Hello guys!  Im using RS Logix 5000.  Can someone explain me what is the difference between when a servo is shutdown or disabled ?  I read the help but it says the same. I can assume it like when its shutdown, there is inside some circuit which is not allow the 3 phase for the drive.  Disabled is that when it have the 3 phase but nothing can happen ? Is there any difference with the break ? Like when its shutdown it can rotate until its slow down by itself or the break will be active ?  I tried to uplod a pic but it was not succesful. When you open a servo axis properties and you choose the Fault actions tab. You can find there these settings.    Thanks a lot. 
  10. Hello All, I am new to Studio 5000. I am trying to have my limit sensors energize my stop output, and also have a manual bit that I can toggle that will energize the stop output as well. Currently, toggling my manual bit works for energizing the stop output, but my limit sensors turning on does not energize my stop output. Not getting what I want with or without the ONS. What is going on??? Thanks, Daniel
  11. Hello Guys! I have couple of questions about tuning an ab servo motor. -Actually what does the drive or plc doing when I launch a servo auto tuning?  - What are the little boxes like position error integrator ? There are checkmarks in fornt of the lines. Can I choose the methode or something? I mean its not "auto" ? Why it is auto then ? - Can someone send me some basic literature where they explain me what these stuff acutally meaning ?  - What is the hook up test what for is good ?  -When you are doing a servo auto tune what are the parameters that you are monitoring and why ?  -I should do the auto without or with load ? Whats the difference ? I know there are so many question I would be so grateful if someone could help me with these answears, or even just with one. Thanks again. 
  12. I have inherited a program to work on using MAM motion commands on a CompactLogix 5370 processor. The MAM variables for some parameters state that REAL data type is required. However in looking at the the code those REAL variables are actually declared as DINT. Is this OK. Does Logix somehow accept DINT for these parameters even though REAL is specified. So if parameter is 5600 DINT it somehow interprets this as 5600.00 REAL. Confused!
  13. Hello! I am using the Plant PAX AOI L_CPU_24_Up and am having zero luck finding out both independently and from tech support what the 16 bits of the Ref_Out.Identity.Status are. The description says Tag to receive CPU data, device status (bitmapped, see documentation).  I have a techconnect contract, but cant find the correct documentation where this information lives.  Could someone please send me a link or just give me the number of the publication.  I attached a screen shot of tag info I am looking for. Thank you!!!!    
  14. I put together a system a couple of years ago with a L306ERM with I-O, PanelView, etc and I was sold Studio 5000 Lite to program it. It worked out ok on that project but now I have a project that I need to use a Powerflex 525 VFD and the software won't let me add the Powerflex. I've tried several different PFs and none can be added. It crashes at the Create button and puts out the wonderfully descriptive message of "Unknown Error" Email AB support. As of 4-1-21, AB doesn't take emails for Powerflex drives. Anyone know if the Lite version of Studio 5000 will work with a Powerflex 525?Thanks you for looking.
  15. Hello! I have a plc program where I need to start and finish an MAM instruction based on a set amount of time. I am trying to calculate the speed of the motor based on the time but when I do, its always off by some milliseconds which I cannot have. I thought this was due to not considering acceleration time but changing acceleration does not change how long it takes the instruction to complete. Is there a more reliable way to perform this? Currently I have my speed units set to seconds which I thought would work (and did improve it slightly) but there is still a slight offset in time. If there is no reliable way to do this, is there a reliable way to predict what the offset in time may be? or what is even causing the offset? thank you in advance. Edit: Or should using seconds work fine, and its more likely something else in my program?
  16. Ok, so I was tasked with setting up a virtual for our development team to be able to use to quickly deploy projects hmi, emulated plc, and studio 5000 project together on one virtual.  The main reason for this is when we get a project, many times we have to wait for an available plc.  We have plc’s in our rack but they can’t be used because they are being used for other projects.  I’ve used the compatibility matrix that Rockwell has but my boss wants to stick with Windows 10 Professional like we do in most our projects but according to the matrix, it looks like having FactoryTalk View SE Enterprise version 10, Studio 5000 Logix version 33 and Studio 5000 Logix Emulate version 33, FactoryTalk Gateway 6.11 and RSLinx 4.11 (mainly for communication to the emulated plc) but in the matrix says Windows 7 and Windows Server 2012  is the best choice.  I’ve ran into issues with Emulate opening, it takes up to 20 minutes to open.  Our licenses are on a server and accessed using FactoryTalk Activation Manager and all the activations are there.  Any suggestions would be appreciated.
  17. This is my first post so let me know if there is anything wrong with my post. I am learning Studio 5000 right now for an internship and created a simple project involving a pushbutton and some LEDs. Now I am trying to create an HMI for it in View Designer. My problem now is that I cannot establish a connection to the project because I do not have a physical HMI connected to my plc (Logix 5380). I can't find any way to emulate an HMI module so that I can get it to run. When I emulate my HMI project it tells me "Unable to reach controller TEST" where test is the name of my plc program. I added a module that matched the model in my HMI program (panelview 5510 2715p-t7wd) which I arbitrarily picked at random. But when I go into references and try to add HMI to Controller Path it does not show up (I'm assuming it's because it is faulting in the plc program since it doesn't actually exist). Is there not a way to emulate an HMI or add a virtual HMI to my studio 5000 program that I could connect to from View Designer?
  18. Hello Folks... The pictures show it all... I just need to produce a one-shot inside the IF...THEN, and the Oneshot's input bit goes from 0 to 1 as you see from the trend, but the output bit is not going to 1, or giving a pulse ? can anyone help me understand why i am not getting a pulse in this code ? And is there another easy way to get pulse inside IF...THEN without changing the condition which activates the if loop ? Thanks in advance for your time
  19. I have a Base tag of BOOL logic that will not activate the MOV output.  The Base tag is paralleled with an Alias tag for a NO pushbutton.  When the pushbutton is actuated it produces the desired output.  Has anyone encountered this issue from a togglebit base tag before?  Why would a base tag produce a different outcome from that of an alias tag that function properly?
  20. Hello All, First time working with PLC. Get the hang of it from stuff I researched. Having an issue with an axis setup for a servo motor.  When I try to do an auto tune it gives me an error that axis is not configured.  Source: Config Fault    Condition: MotorDeviceCode- INvalid attribute      ACtion: Immediate Stop Fault Entry: Type 8, code 9 subcode: 1314 stopaction: 4 Statechange: 3   I was wondering what am I doing wrong? Any leads or source information I can use to solve this. 
  21. Can anyone explain to me what this would mean in a COP instruction? Source: #N[N187:4]:[N187:5] Dest: #N[N187:1]:0 Length: 20 I am doing a PLC5 conversion to rslogix5000 and some (most) of it has been a nightmare -.-
  22. Hi, I'm fairly new to motion applications and I have an interesting (to me) problem to solve. I'm using Kinetix 5700 with MPL motors to drive a pick&place carousel and a conveyor belt. I have a virtual master that driver the carousel in 1:10 ratio. The virtual master also drives the conveyor belt, the ratio is given by the carousel diameter and the conveyor driving cylinder diameter +  2x the belt thickness. And I'm using MAJ to drive the master and the MAG instruction to drive the carousel and the conveyor. This all works well. BUT: the carousel does not pick the product in the same place every time. That creates irregular gaps, or pitch, between the product on the conveyor which causes some issues down the line. Is there a way how to superimpose a value to the conveyor axis to ensure the pitch is regular at all times. Something like the ADDAX instruction it Trio motion controller for example? I'd want to have a sensor that detects the edge of the product and compares he encoder value to an expected value and slows downs or speeds up the conveyor accordingly. Thanks a milion.
  23. I have a counter tracking the number of cases packed through a robot program and an option to count less than a case (pack now). In order to update the correct number, I'm using math (ADD) to increment the counter by one.  I used that in conjunction with a MOV instruction to increment up the counter by one.  However, when I energize the button, my accumulated value goes up by +220 or so. Any way to fix this?
  24. A little background information here, I am trying to create a moving average so I accomplished it with the code (imaged attached) The problem i am having is the AVE instruction error bit goes true. it leaved me with a result of 1.#QAN  I did some googling and it said this is typically done when dividing by zero?? so i added a NEQ to 0 prior to loading the array. then it happened again. so i put the error bit in front of the FFL so it will stop loading the array when i get the error bit so i can see what values are in the array when it errors out. Has anyone else had this issue and what could you do to resolve it? I haven't had any luck find something that points me in the right direction. Thanks in advance for your help.