Search the Community
Showing results for tags 'rs485 repeater'.
Found 58 results
-
Hi, I have a problem with modbus communication. I set everything as shown in the pictures and I get a error 04. What is wrong ? program.bmp ustawienia.bmp
-
Dear All. i'm a new user for Janitza. and i have issue related to RS485 actually, not to Janitza itself. i have one device (UMG 96RM), where there is only RS485 (2 pin only), no RS232, no USB, No Ethernet port. i'm trying simply to connect the device to the PC, via (USB to RS485) convertor, but i'm not able to do it. for me, this is the first time i'm see (RS485 2 Pins), usually there is Ground signal also. anyway, could you please somebody help how to connect? shall i add a pull up & pull down resistors at the device? and what is the power supply i must use? noting that, i tried many things, but still nothing happened. Appreciate if somebody can help Best regards.
-
Hi I'm trying to figure out how to use the OP320-A to control the relays on the FX1N-20MR. I have mastered the OP edit tool, but I havn't learnt how to use GX Developer. The FX3U and op320 by 485 setting youtube is a good start. Does anyone have a GX Developer project file available. Is there an OP320 and FX1N or similar that comes together, pre-programmed, ready to use. I know how to write C++ programs to send RS485 commands, but this GX developer looks complicated. many thanks Tim
-
Can Mitsubishi FX3GA-60MT PLC be used as Modbus RS485 Slave? Any sample code or documentation would be very helpful. I am planning to communicate to Weintek HMI (Modbus RS485 master) to FX3GA-60MT PLC (Modbus RS485 Slave). Any other ideas would be nice. Thanks
-
Hallo, i want to connect Omron PLC CP1E use CP1W-CIF11 to AD4329A with RS485 communication. my wiring is CP1w-CIF11 AD4329A SDA- SDA & RDA SDB- SDB & RDB and until now, i cant get data from AD4329A. Do you have any clue for this project? Thank you Riandanu PLC to 4329A coba.cxp ad4329aex.pdf
-
Hi Friends, In My new project I have used two Delta PLC'S (DVP-60ES2 and DVP 14SS2) I want to communicate both through RS 485 Communication protocol.We have tried communication trough manual help.But Master Slave device not communicating.We have checked for any error code in D1130 but it always showning "K0" value.here with I have attached screen shots and complete program for yours kind reference.Kindly help and guide us to communicate. Master.pdf RS485 master trail 1.dvp Rs485 trail 1 slave.dvp Slave.pdf
-
Modbus addressing in Weintek HMI to poll data from Temperature sensor through RS485. In my system i have connected Temperature sensor to I/O Scanner has output in terms of RS-485 which directly connected to COM3 Port pin. No. 6 (as Negative) & 9 (as Positive) of HMI (Model No: MT8071iE) and HMI connected to PC via ETHERNET. I want to read temp on HMI screen via MODBUS protocol. So, can you please provide me instruction about addressing of MODBUS register in Easy-Builder Software so can read data of corresponding register. Because when i do compile i got an error like " Device no Response". I hope i will get reply from your side as Fast as possible to overcome this problem. Thank you.
-
Any one have any experience to due with Parity Error when RS485 input can't get? Below is the circuit trace i get. It shown me that Parity Error when input signal from my device. But some of the time I can get the input message completely. Sometime can't. Is there any way to solve it?
-
i am new in plc programming . i know the basics difference between the rs232, rs422, rs485. but i am little bit confused in it. so i have the following question regarding these terms. 1. can these protocols communicate with each other i mean rs232 can communicate with rs422 or rs485 and same. 2. my plc has port rs422 but i can connect it with my laptop serial port which is rs232 ? 3. what are the main important points that kept in mind during communication or cross communications. any help will be greatly appreciated.
-
For the Dematic PTL (Push To Light) systems, does anyone have any information on the protocol used. I'm assuming it's RS-485 based since the buttons use MAX1487 drivers. What I'm looking for is if anyone has a starting place to look at the handshaking or messaging.
-
Hello Everyone I have a problem to connect FX5U with Inverter Mitsubishi D700. ( no respond from inverter) . I did read and following the manual. Could any one can help me?
-
Hello, PLC: NX1P Comm module: NX-CIF105 I am running a serial (RS485) network to control several motors. As a trigger for to read the serial port I am using the ( Ch1 Receive Data Exist) bit, which is an internal bit that's ideally should be energized when there's data in the Receive buffer. However, this bit isn't reliable at all. I am reaching out today to figure out if there's another way to trigger the receive command ( preferably without a delay) thank you all Cheers!
-
Mitsubishi FX5U Serial RS485 - non procedural communication
CrustyBurger posted a topic in Mitsubishi
Hello, I have managed to send output to a terminal using a serial channel. I have not been able to send data from the terminal to the Mitsubishi PLC. I am not using terminating resistors but I have a slow baud rate of 4800. I am just using regular wires (1.5mm square) . I think the hardware is okay as I can see the output from the PLC on the screen. Attached is the code. I just send from the terminal the character 22 every second, I hope this is not too incomplete to get some help. The plan I guess later is to interface with LabVIEW probably using Modbus but I need to try to get this working first. UL9.gx3 -
Morning Guys, For my latest project I need to read a gas sensor via 485 from a Momentum PLC. I've been through the help files, but they seem to only raise more questions than they answer, they only seem to reference PLC -> PLC comms. I've had a play with the 'MBP_MSTR' & 'OUT_IN_MBUS' function blocks, but i can't seem to get anywhere, Has anyone got any examples of reading in data via 485, or can anyone lead me in the right direction?
-
Hey guys I don't have much experience in PLC serial communication and I'm tasked to integrate 6 OP-905 scales with our EATON based control system. The scales are rs485 asynchronous serial communication, my concern is that if the device is not designed to be an RTU then I cannot use modbus. And if that is the case how do I talk to multiple scales using the async protocol. Has anyone done this in a similar platform?
-
I need some help with G.input and g.output commands. I have a Q04UDEHCPU and my slots are as follow: slot 0 - QJ61BT11N cclink slot 1 - QJ61BT11N cclink slot 2 - QJ71C24N-R4 2-channel RS4222/RS485 I need to have 2 separate RS485 stings going to different devices. I cannot find the way of setting up the g.output command. G.Output "Un" (s1) (s2) (d) "Un" says it is the start I/O signal of the module, but I am not sure what that means. What there be a different "Un" number for each channel?
-
Hello everyone, I'm a beginner in RS485 communications and i want to control 2 inverter LS iG5A via RS485 from a PLC Mitsubishi FX2N I really don't understand how i should aproach and start this part of program in Ladder Diagram, to write and read parameters from Inverters. Please help me with an example Thanks.
-
Can CX Supervisor be used as modbus RTU master using RS232/RS485 or USB/RS485 converter to connect it to PLC or panelmeter or other modbus slave units and how? Any example? Thanks in advance Goran
-
Is it possible to communicate from a PC program to PLC program for reading inputs and setting outputs? How can it be made ? is it possible to do from TER connector or AUX connector , without special comm module?
-
Hello all i'm looking for some software to record a 100 plus channels maybe with an ascii string from a PLC? i want to be able to assign each channel with a unit and a range, flagging feature would be nice. - selecting the channels i want to view - auto start recording - save file and start new automatically -view and create reports preferably no additional hardware because of the amount of channels. this is to record an operators every move so in events of damage or plant failure we can quickly identify the problem (point the finger) many thanks dan
-
Help Needed....GE Multilin EPM 5500P Power Meter Interfacing to GE Multilin EnerVista.
soms posted a topic in GE
Hello, I need to communicate Power meters ( GE Multilin EPM 5500P) to GE Multilin EnerVista Software. The present communication system uses Ethernet for communication from LAN Switch to Computer. There are a few existing Power Meters which need to be connected to the Network. The Meters having output ports as RS485. I need to use a convertor for that right. So when I contacted GE they told me to use GE Multilinet Serial to Ethernet Convertor. But due to the price and unavailability of the material I am thinking to use a universal convertor. Is that compatible for Multilin Devices?? and In Case of using a universal Convertor does we need any other drivers for that. Please Help Me.. Thanks In Advance mnetman-a3.pdf multinet (1).pdf PM-GE.pdf -
Hello , I'm using DVP12SE11R Delta PLC . I would like to read data from an external device using RS485 communication. In the WPLSOFT i have informed that i gotta use MODRD command in order to read the data . but i am not sure how to use it properly. the data is formed as one bit ('1' or '0') i wanna read 10 registers using MODRD although those registers are not ordered one after another and i know MODRD can read 6 registers one after another. Then i would like to use that bit as a Normally Open contact in the WPLSOFT and turn on a coil. i would like to get some help with it. thanks.
-
Hi, I'm trying to test the serial communications with my Micro820. I acquired a 2080-SERIALISOL so I could have "someone" to talk to. I want to use RS485, so I figured that I'd have to connect: Modbus pin 1 (D+) to serialisol pin A1 (+485) Modbus pin 2 (D-) to serialisol pin B4 (-485) Modbus pin 3 (GND) to serialisol pin A2 (GND) Now when it comes to CCW, the thing gets a little harder. I know I need to use the MSG_MODBUS block (in fact I need 2, one for the modbus and another one for the serialisol), and I guess I specify the interface I'm using on the TargetCfg field (data type MODBUSTARPARA). But how do I figure out that the Addr (UDINT) and Node (USINT) values are for my Modbus and Serialisol? Or am I doing it wrong? Does anybody know of any place where I can get some more guidance or even a funcional ladder program? Thank you in advance
-
Dear All Sorry for my English I have Siemens CM1241 (picture attach) and need to communicate with Intellisys XE 90 via Modbus RTU, period. The problem is, form XE 90 the connector is Phoenix Contact 2-Position Screw Plug Connectors MC 1,5/ 2-ST-3,81 1803578,or in other word, only 2 contacts form P9 COM1 = L1 , L2 (picture attach). How we connect it to DB9 Female in CM1241? What signal go to what Pin? How about the Ground? Do I need Resistor? Thanks for all your supports Best Regards
-
Hi dear I want control micromaster440 siemens with cp1l omron via rs485 Is there any one help me?
