Search the Community

Showing results for tags 'rotary phone'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 9 results

  1. FPWIN Pro 7 Help

    I am a novice trying to learn the instruction set to FPWIN Pro 7 for Panasonic PLC FP0H controller.   I am trying to use a rotary dial phone (Western Electric 500) to dial a certain 10 digits to unlock a normally locked electro magnetic lock for my son.   Does anyone know what the instruction program needed to perform this task. I have looked at the instructions: Pulse Relay Pulse Arc Center, and Pulse Target Value Match Set.  I do not know which one to use. Any ideas would be greatly appreciated. Thanks, William
  2. If it is about changing Gmail ID on phone it is advisable to open the device settings application further at the top the user should click the personal information account then under the “Profile” or “contact info” the user should make the necessary changes. If you are still looking or searching for more information than in that case it is advisable that the user gets connected with the certified Gmail technicians. Lines are open for help and support all the time there is no such issue that cannot be resolved by the Gmail technical team.
  3. In order to conduct a change or a reset of the password, the user should follow the given steps- • Open your Google account in order to sign in. • Then under the security section select signing into Google. • Then select a password as you will have to sign in again. • Then in the field enter your new password and then click on “change password” and if you need any sort of further help connect at Gmail Support Number UK 
  4. Why am I receiving a Gmail verification code without requesting for it? There can be multiple reasons for you receiving a verification code without requesting for it there is a possibility that someone who knows your Gmail ID is trying to get an access to your Gmail account or if you are trying to log in your account with a new or an unauthorized access, Google will always send you a verification code if you will open your account on a device on which you have never opened it before you will also receive verification code whenever you will enable 2 step verification for your Gmail account.
  5.  Hi all. I have a question about how to set up the motor in rotary mode. My application will be a basic rotary table driven by a servo motor without gearbox between. So, in my servo drive axis settings, I select the motor as a rotary mode. then I defined the maximum position setting value for 360 degrees, and minimum to 0. So far so good. But the problem comes when I want to make an absolute move using the mc_moveAbsolute to move 360 degrees. Whit this settings the error "target position settings out of range " will come up. So, what is the solution to rotate 360 degrees without generating this error? if I set up the maximum value to 361 degrees and then if I rotate 360 the error will not occur and the motor will rotate 360 degrees as I aspected, but it's this correct ? or there is another way to do it? Thanks  
  6. Hello, I need to Synchronize two 4kW motors connected to their own individual AltiVar VSDs. To put it simply the two motors are pulling cables on a pulley and when loaded the motor's slip and the speed varies. I have an Omron CP1L-EM PLC and 2x Omron Rotary Encoders ( E6C2-CWZ5B encoders - 360 PPR) - connected to each motor,   What is the best way to read the pulses from the two rotary encoders then convert to RPM? 1) Using  PRV or PRV2(883) instruction,  - this would be the best option as it would convert the value to RPM - however, can I use this instruction on both Counter 0 & Counter 1? 2) Or read the raw value from  Counter 0:  A270 (connected to motor one's encoder) Counter 1: A272 (connected to motor two's encoder) Convert the pulses to RPM - then compare and adjust? 3) Or using CTBL. - is this a useful instruction for this application?   Once I get the RPM speed from each motor - I can then do a compare instruction - see if there is a mismatch and if so send a scaled analogue output to the VSDs to correct the speed if required. (10-50Hz) What would be your recommendations? any help would be most helpful. Thank you.
  7. Using Rotary Encoder

    Hello dear, may i need some help .. I want to use a rotary encoder for my CJ2M CPU32 , but i don't know what anything must i prepare for it. such as type slot for plc and what kind program for read pulse from rotary encoder ... Thanks before  
  8. WinCC for tablet?

    Hello, I´d like to know if there is a possibility to have visualization (using WinCC) in my smart device (tablet or phone). Thanks.
  9. Rotary input device

    I am looking for some sort of rotary input device which could be used for fine adjustment. Ideally it would have to two output pins, if turned clockwise it would send pulses on one of the pins and when turned counterclockwise it would sent pulses on the other pin. These could be connected to two inputs on PLC and a value in a given variable could be incremented and decremented depending on the direction of rotation. Almost like using potentiometer with analog signal. I guess if I can not find anything I could use incremental encoder and look at the phase of the output to decide which way it is being turned but hopefully simpler and maybe more cost effective solution is out there? Thanks.