Search the Community

Showing results for tags 'rockwell software'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 135 results

  1. GX works 2 software

    Hi guys    I am having trouble installing GX works 2 software. The software is fully legit and came with 2 license keys the first one I put on work laptop and second on my personal laptop. The install all goes fine but when i try open up GX  Works 2 I get this message from the attached image. I have plenty of room on my pc and even have other PLC from different manufacturers on it without issue but the GX Works is just giving me grief and I have tried to increase data on MY laptop and other windows fixes but still get this message when I try open it.  Has anyone else encountered this problem before or any ideas?   Cheers guys     
  2. Good day,  I retreived the event log from 2x RM's today, I found on the one RM that there has been more than 700 million events. Apart from switchover events, there following event shows up a lot: (C2) Bridge Connection Deleted       Starts/Stops   Byte 1 (0xFF) : Byte 2 (0xFF) : Byte 3 (0xF2) : Byte 4 (0x13) : Byte 5 (0x0) : Byte 6 (0x0) :  Our system: 1756-RM2 1756-L75 1756-CN2R 1756-EN2TR 1756-EN2TR 1756-EN2TR 1756-EN2TR The CN2R's are connected to 12x 1771-ACN15 and 2x 1756-CN2R in remote racks, which is also set up to be the keepers. The EN2TR's are connected to their respective ETAPs/EN2TR's in ring topology.   We have experienced some issues when switching over. Hope someone can tell me what that message means regarding the Bridge Connection.    
  3. Hi everyone... I'm not a AB expert.. I'm using L74 controller, Rm2 redenduncy module,  EN2TR and EN2T module (on each chassis) on my control logix project and having 3 remote IO's rack on ring topology... I have use EN2TR for ring topology and EN2T for scada communication. The problem is my controllers are not synchronising on fibre optics... I have to connect both EN2T modules with one an other for controller's synchronisation. They are syncing over ethernet but not over optical... your help is appreciated    Thanks in advance
  4. Quick Designer Software

    I am looking for a working copy of software that will work to modify screens on an old Quick Panel.  I believe the software is called Quick Designer. The old Panel I am trying to access is serial communication only. I have bought an interface cable from PLC Trainer.  I have a Windows 7  32 bit machine ready to go. Thanks, Scot
  5. EPLAN Help

    I am attempting to use EPLAN P8 (v.2.9) to import details from a 'holy grail' excel sheet of a cable list with terminal tags and numbers (source and target for each cable). To do this I began importing details in a trial and error fashion through the pre-planning menu to the pre-planning navigator. I have several questions. Question (1) Has anyone else tried to do this?  In the process of importing from the excel sheet I have not been able to successfully assign source and target for each cable object. It shows up on the synchronization dialog after I work through the field assignment but it disappears after import. ( I do not fully understand the proper structures, definitions, properties and levels to get what I want). I do understand if I import source and target terminals, and cable objects separately, then I can place on the detailed view and source and target are assigned then. Question (2) Does anyone know how to assign source and target to a cable object in pre-planning 'by import'?  (Reason being that the excel file is huge and manual assigning isn't feasible). On one of my attempted field assignment schemes I was able to have cable, source terminal, and target terminal, all on different levels (not actually assigned as source and target for the cable object btw.). However the result for source and target on the report (planning overview, form: f40_006) had all of the designations of the tree structure from the upper levels. For example, cable: HAC4401, source: HAC4401 X1:5, target: HAC4401 X1:5 TB1:5. (Where X1:5 is source terminal and TB1:5 is target terminal). Question (3) Does anyone know how to create a 'branch' or 'fork' in the tree structure in the preplanning navigator so that both source and target terminals (planning objects) are on the same level and so do not inherit each others details?  There's a bunch of info in reading the above I know, but if anyone can shed some light on this it would be much appreciated!!!! Thanks in advance,  MajorMac
  6. Codesys

    Hello - I stumbled across some mention of Codesys and was curious if anyone here uses it. Pros/cons? prefer it over other programming software. Have it downloading currently (since you can download a free variation of the application) but it looks quite interesting. Also - what PLC hardware is programmed with it? Did not see that mentioned on their website when I was browsing through.
  7. Dear friends.. I want HMI panel view 300 software.. Is this available in net or free of cost in web sites
  8. Hi Dears, I have 2 No. CPU 315-2PN/DP (6ES7 315-2EH14-0AB0) I want to use this CPUs for S7 300 Software Redundancy. I Have 2 CP342-5 too for IMs. I want to use profibus port of this CPU for synchronization. if this CPUs are suitable for software redundancy? or I can not use this CPU and I must to use CPU-315-2DP instead?   Thanks
  9. Zm-71se

    Is there anyone, have this software? Coukd you help me
  10. I have a 1996 Howa Vertical Machining Center running on a Mitsubishi M520AM control. 3 Axis with Jig Changer on the main control. ATC and 16-tool magazine on 2 each Model E/FCUA single-axis amplifier/controls with a DIO extension interface to main control . I lost parameters and User PLC program to the 2 Model E amplifier/controllers at  ATC and the Magazine servos. Dead batteries, and both units are back to defaults. Main Control and Operation Panel work. I can read the ladder and write to CPU ladder from the operator panel, and I have a paper copy of the main ladder and parameters. I have a working FCUA-CT200 pendant to communicate with the 2 Model E controls, but no way to program a new user ladder and upload it to the Model-E's. Anyone know where to find PLC software for 1996 vintage Mitsubishi CNC controls? I can probably make any kind of interface cable it would take to get from a PC to the control. the FCUA-CT200 teach pendant will let me enter parameters  via 'PLC I/F' but it won't let me program and read/write a User  PLC.
  11. PLC password crack - FATEK

    hello, can any body help me about plc password crack, I have an old FATEK PLC and i want to upload the program to my pc but i don't know the password. please any one here.   Much appreciated if you can help me.Thanks 
  12. I have a 2 CompactLogix PLCs running right now, communicating CIP Safety and Standard data over Ethernet I/P.  For reasons I can't explain right now, the IP address of the second one HAS TO change semi-randomly (the 1st PLC is static).  Setting the 2nd PLC's IP to static or assigning it a static DHCP address is the obvious solution, but for the purpose of this question, that cannot be done. Is there a way to programmatically change its IP address on the 1st PLC's program?  (There is an HMI attached to the 1st PLC and adding a screen to enter in the new address would be trivial.)  The only bit I'm still missing is how do I change the IP address on the module in the 1st PLC so that it's pointed at the right IP address of the 2nd one when it changes.    I found instructions on how to use msg instructions, but that hasn't worked yet.  Any help would be appreciated. Thanks!
  13. Hi All I need software for ALU201L, it is an old Schneider plc Thanks
  14. Mitsubishi

    i want mitsubishi plc programming software gt works 2 basic version
  15. Hi,  Can someon help me with the following question. Like what makes a Kinetix 6000 drive a Guarded drive ? What type of safety stuff can you set to make it more safe.  Is it some parameter ? I am bit confused, by the manual. Should I active it in the PLC program or how ? Or it is some setting like a safe speed or torque.  I would really appreciate any help. Thank you so much ahead.  Have a great day, thanks for the reading.
  16. Hi. I need to troubleshoot a Modicon TSX Momentum 170ISP00100 Weighing Module. This hardware was discontinued by Modicon a few years ago. Does anybody have the configuration/runtime software for this module? Any help would be appreciated. Thanks in advance
  17. Anyone possibly have software for the Mitsubishi Positioning module AD71 (SW0IX-AD71PE) ? It's a servo positioning module for A Series PLCs that can either be programmed by an old programming terminal or a DOS based program for PC. I think SW1IVD-AD71P could also workReally hoping to find the any compatible software for this controller. Maybe someone has leads?
  18. Dear Experts Request to let me know in case it is possible to get communication software to communicate with CompactLogixL24ER. As per my understanding Rs Logix Studio 5000 is needed , version number required is V21.000 Thanks and Regards
  19. password unlock tool

     hi everyone i m traying to   write to plc  a program and getting this message then program is not downloading to plc   'there is a device in the program (main) that is outside of the range  check the program and currect the device that outside of the  range ' I m using mitsubishi fx3ga-60mt  plc. please suggest me about it .                              thank you     hello everyone please let me know about  how to make software  tool for password read from Mitsubishi,delta, omron, siemens plc .                             thank you       
  20. Messung PLC

    Dear Friends, I want Dox mini software for messung plc, i had search in messung dealers in various place, but not available. <edited> Thanks  Boominathan.K
  21. Hello Friends,This video guide you about the programming of Schneider Altivar 312 VFD using SoMove software. From this video you can learn about1. Using SoMove software to program the Altivar 312 series VFD.2. To control the induction motor using control terminals of ATV312.3. To control the induction motor using the SoMove software control panel.4. To monitor the status of motor speed and thermal state on SoMove software.5. To export the graph of parameters recorded using SoMove software.https://www.youtube.com/watch?v=GgUKymi3uwAPlease support my channel by LIKE and SUBSCRIBE to continue these tutorial.ThanksSana ur Rahman
  22. MAM-KY02S

     kindly i need the plc software programmer for plc MAM-KY02S  and the cable connection data 
  23. Hi all,  I want to ask some questions regarding Ethernet Communication with FX3U PLC series. I have 2 PLCs of FX3U series (FX3U-48M and FX3U-64M) and I want to monitor its data (input and output) using ethernet communication in real time. My questions are: 1. Does FX3U PLC have ethernet port so I can connect it directly to my Laptop/PC? 2. If no, do I need to use FX3U-ENET-ADP and can it be used for 2 PLC or only 1? 3. What software do I need to use to configure the communication between PLC and FX3U-ENET-ADP? 4. Does this configuration change the existing PLC program? 5. Can i transmit the data wireless-ly using some kind of ethernet to wifi adapter and what additional hardware do i need for that?  
  24. I want to take data from an AllenBradley SLC 505, and send it to an Omron NX102-9000. Specifically F8: 46 from my SLC 505, which is a temperature sensor. Both PLCs are on the same Ethernet network, each with its own IP address. Have you tried it?