Search the Community

Showing results for tags 'remote screen'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 58 results

  1. Helo All, Thanks for your support on my previous quiry. Iam now facing an issue with rotation animation of a motor in factory talk view. I have a screen containing 5 motors and good number of numerical displays. Numerical displays need to be updated just every seconds ,so i changed screen updation rate in SCADA as 1, changing so decreased my motor rotation speed. so do i have any other option to change motor animation fast keeping numerical display screen updation rate as 1 second?? i have used the tag  syste/blinkfast  
  2. Hi, I have a a few substations and I´d like to have a local SCADA in each of them. What is the best scada to use with reasonable price? Does anyone know if there is a solution without the need to have a PC for each substation? Thanx
  3. Is there any way of viewing a remote Proface GP or LT screen inside a second GP or LT screen? I want to do this to avoid creating and loading duplicate screens. Essentially it would be like using GP Viewer-EX where the PC is replaced with another GP or LT unit.
  4. HMI GOT1030 Windows Screen

    Hi, I am currently working on window screen. I don't know how to disable function of closing the window (see attached red screen). The window screen is showing by pressing button on input. My settings are shown on the screens below.  
  5. I am in the middle of doing a retrofit for a old PLC5 and i decided to upgrade it to a Control Logix. With how much I/O I was needing the price of the system was going to be very pricey. So I decided to use my main rack as a control logix and use Flex I/O for my remote racks. I have never put together a Flex I/O rack so I am unsure of what I need for this rack other than my I/O modules and a communication module. Could someone give me a list of what is needed for these systems? 
  6. I have multiple PVP 1500's on the same network. From the one in my control room i need to be able to see what user is logged into what HMI. How would I address the system tag of another HMI on the same network would I use the IP address? thank you for any help in advance
  7. GS2107 BASE SCREEN

    I am new with GS2107 WTBD, please anyone tell how to set the following initial things: Base screen overlap window1 overlap window2  superimpose window1 superimpose window2 Dialog Window Just want to make any new program for HMI, but not able to proceed without above settings.  
  8. Was wondering if anyone can tell me whether it is possible to use the Red Lion Graphite displays to remotely log into your system via Ethernet for programming.  Can it be used as a bridge to other Ethernet devices connected to it?
  9. Remote I/O weidmuller

    Hello,  I am trying to connect a Weidmüller UR20 Ethernet I/P  (Hardware version 1) to a Omron NX1P2 PLC via Sysmac Studio. I have imported the Weidmüller EDS file into Sysmac studio and connected two tags to the target variable 101 and 102 (I also tried using a array of bytes and a single word).   When I transfer this configuration to the controller and set the controller in run i get the following error: Tag Data Link Connection Failed (0x84070000). I have tried to update the firmware of the Weidmüller I/O but this doesn't seem to help. Also the web interface shows no connection with the PLC. I also tried to setup the connection with the CX network configurator but this gave the same result. Is there someone who can help me with this problem Thanks in advance.
  10. Remote IO

    Hi friends , recently i ve been doing some diggings about remote IO cards, in my factory we have a CJ2m PLC and it communicates with remote IO cards with four numbered words (2080.00 , 2080.01, 2080.02....2080.15 ) and there were several dip switches on the IO cards, which were set but i can't understand what was the basis of that settings. So I'd like to know how these dip switches behave and what are the uses of them ?? and how is it possible to have 4 numbered word bits ?? pls help me someone to clarify this, i tried internet, but cudnt help myself !!!  thank you    Here I attach one of the pictures i took of one of the remote input cards.
  11. Remote Password issue

    Hello everyone, can u help me out please, quite urgent !!! :( i have GS2107-WTBD HMI display along with FX5U-80MT-ESS, i had one of HMI designs made on GT designer 3 by earlier designer (not in my contact now). i uploaded the graphics to HMI module and later it stuck to the initial LOGO screen and doesnt move further, moreover the HMI is not communicating with PC. i suspect it had remote password with it how can i remove this issue or hardware rest the HMI with factory defaults guidance required
  12. Omron CJ2M - Wago remote I/O

    Hi there, I’m not sure how familiar most of you are with Wago remote I/O, but I hope you may have some solution for the following connection problem I’m having. I’m working on a project to modernise an old folder collecting machine for which I’m using an Omron CJ2M Cpu33 together with 8 Wago 750-352 remote I/O units over ethernet/ip. These Wago units all contain two 8DI digital input cards and two 8DO digital output cards alongside a 750-610 bus power supply card. Adding them to my network in CX network manager is no problem and all seems to work fine. That is, as long as I don’t physically add the bus power supply card, which I need to, well.. power the Wago bus. Soon as I add this card (which was in place while making all the necessary settings to the Wago and Omron units) it just won’t connect. Remove it and it connects like it should. As far as I know the power supply card has no I/O addresses or other communication functions whatsoever, so I can’t get my head around it. Even stranger is that when instead of it I add an analog input card, with bus power connections build in, it connects without a problem. The .eds file only contains info about the main Wago unit, after installing it I should be able to add any kind of I/O card and address them in the Omron software. Also, the supply card is added and visible as a fifth card in the Wago I/O settings and the I/O status led is green during this error. Therefore I would say the problem is at the Omron side. Any sugestions?   Thanks in advance Andy - The Netherlands  
  13. Hello,  As the title indicates, we have a micrologix 1400 that has been installed for a long time.  Recently it faulted out on 71h and was in Remote Mode.  Do these PLCs revert to Remote Mode when in a fault condition?  We placed it back in Run Mode and everything worked fine, but how did it get to Remote Mode in the first place? Thanks,  J 
  14. I have been tasked with pointing our FT View application to a remote SQL server for all data logging.  I'm having some issues getting this to happen.  I've configured everything I can find in our test environment, but FT View still points to the local SQL Server instance.  There must be a setting I'm missing.   For instance, when i go to Tools -> Diagnostics Setup -> Destination Setup -> ODBC Database, and I point to the system DSN I've created pointing to the remote server (and even enter the correct remote credentials), when i create a table, it goes to the local sql server instance... I've restarted multiple times.   Any direction would be appreciated.
  15. Hello all, I am still fairly new to this forum and PLC's in general. I am trying to connect a EA9 touch panel via Ethernet to an Allen Bradley Micro Logix 1400 PLC. I am using Ethernet over serial because I need the serial connection to program while using the touch panel. I have given the Panel the IP Address 192.168.1.20 with a subnet mask 255.255.255.0 and I have given the PLC the IP address 192.168.1.10 with a subnet mask 255.255.255.0. The panel is not communicating with the PLC and I have very little knowledge on the subject, anyone's help would be greatly appreciated. The picture on the top is from the PLC and the picture on the bottom is from the C-More program for the panel.
  16. AnyViz is probably the easiest way to monitor, operate and analyze your PLC remotely, thanks to the cloud from any location. No need of additional hardware or software licenses. More info at www.anyviz.de Functions: Real-time process data visualization with just a few clicks Record and analyze machine data easily Targeted Condition Monitoring Remote control - from anywhere in the world Connecting machines, beyond location boundaries Access with any modern browser and any kind of device like notebook or smartphone Have a look at our YouTube Channel to see AnyViz in action.
  17. Help with CC - Link IE Field

    Hi Im working with an iQ-R CPU wich controls 6 conveyors with a CC-Link IE Field Network, the CC-Link module is a RJ71EN71. Each conveyor has a remote I/O (NZ2GF2B1-16TE Digital outputs main module with a NZ2EX2B1-16D extension for Digital Inputs). The communication in the CC - Link IE Field diagnostic appears to be OK, but I can´t send or receive IO signals from the Batch Monitor of Gx Works 3. Thanks for your attention!
  18. I want the older screen editor version of delta HMI( Version V1.05.81). I think this is the only Version in which Delta DOP-AS57CSTD Model is present.  
  19. Hello,  I have a Mitsubishi Q02U PLC connected through its serial port to a GS2107 hmi located on the same control panel. I need to add an additional GS2107 exactly the same as the first one at a distance of 80 meters from the control panel. How can I communicate with this new HMI ? Is there a special module to add to my configuration? I really dont know? Please advice. Thanks
  20. Step7 on remote server

    Hi, I was wondering if anyone have experience with Tia Portal Step7 v.14 and Step7 Classic v.5.5 located on a remote server? We have several persons working on our PLC's. As it is they all have their own PC with Step7 + licenses. We were thinking about moving the software environment onto a server to reduce license and maintenance costs. Does anyone else have this setup? If yes do you have any tips or comments? Pros/cons? I already know now that you cannot autodetect/configure new devices from a remote server as the Step7 detection protocol doesn't work through a router. We can live with that. We need both TIA Portal and the Step7 Classic on the same server. Thanks
  21. GOT2000 GT Designer3

    Hi, Is there any way of changing the background color (or pattern) of a Base Screen using Screen Script. The screen doesn't seem to have the same object script options as other components. Or is it hidden away somewhere?
  22. tec

    good day to every body im trying to replace old tuche screen [omron nt20s-st121-v1] to new one [[omron nt20s-st121b-v3]  thay look  indentical and the manuel  show they replacabel] i use nt tool software that i install from cx0ne file . i  upload the data and screen grafix from the old one and i see it on my pc . but i cant download it the the new one,,   i see masege on the pc: [dowload aborted  please refer to error log] the error log write many error like:: memory utillization has exceededthe 96,00 kbyteslimit by73.68kbytes small aplication that i wrote just for cheaking go well and download  i wonder maybe it the nt tool but all the other aplication from that disk cxone work good [plc + hmi +servo ] i hope someone  help mordehay 
  23. I am working on project which is using Micrologix 1400 and AB Panelview. I am using FactoryTalk View Studio to build the HMI. The PLC needs to know which screen is displayed on HMI so some additional functionality can be activated. How would this be done? I was looking where could I write screen number to N7 location in the PLC or set a bit in B3 area but could not find anything. Thanks for your help.
  24. Hello there, I would like to add a "Print" button to my PanelView HMI screens that will basically do a screen capture of the current screen the button is on and then have that file saved in some format ("JPG, PDF, etc). The file could either reside in the memory of the HMI, saved to a USB drive or SD card so that an operator could retrieve the image easily. Transmitting the image over Ethernet to a PC or server would be ideal but probably a bit out there for the applications that I usually create. A local store and retrieve process is fine for now. Anyone got any advice on how to make something like that happen? Is that even possible on PV 700 or 1000 HMI units? Many thanks in advance!